AW: [Asterisk-Users] Capi Dial & outgoing msn?

[Klaus-Peter Junghanns]

> Hi,
>
> On Tue, 2003-12-23 at 19:01, Patrick wrote:
>> On Tue, 2003-12-23 at 17:13, asterisk-mailing at beronet.com wrote:
>> > try it without prefix (else dtag uses first msn) -
>> > so if your city code is 07032 and phone no (msn) 41432
>> > -> exten => _070.,1,Dial(CAPI/@41432:${EXTEN}|30|r)
>
>> Thanks for the pointer Thomas. I removed the areacode from msn= in
>> capi.conf and from the dial statement. Tried again and till no CLID.
>> Stumped at this point. Perhaps my telco doesn't allow setting outgoing
>> msn numbers.
>
> In the Netherlands you would send the areacode with the leading zero
> removed to make this work, so Dial(Capi/@703241432:${EXTEN}|30|r)
> following the earlier example. Different countries have different ways
> to do it. Checkout the FAQ on www.isdn4linux.de, it has information for
> many different countries.
>

If you use "@" before the outgoing MSN you will enable CLIR. So the other
party will not see your caller id.

regards
kapejod