[Asterisk-Users] Fw: Questions and finding

[Jess Magnaye]

> Hi!
>
> > 1. My VAD is turned off (00140014), and it didn't help for that cut-off.
>
> Then check if you have a firewall in between * and your ATA that closes
> the port due to inactivity of your ATA. Also use "SIP DEBUG" in the CLI
> to try to see a bit more of what is going on. You could also use Ethereal
> to monitor the SIP traffic (or the rtp/UDP traffic).
>
> > am not sure if OutboundProxy has to be configured to have it working
fine.
> > Or this just happened to me?  What is your ATA's software?
>
> I don't have such a device, in fact never had. :-)

MY ATA and * are sitting on the same LAN.  So FW or NAT problem is not
possible.  This is also the reason why I commented out "nat=1" in the
sip.conf.

> > 2. I tried dtmfmode=inband on sip.conf, and dtmfmode=rfc2833.  None
worked.
>
> Note: inband only works with g.711 codec. Doesn't the ATA also offer
> "info" as third dtmfmode option? Anyway, you might want to search the
> mailing list for setup info, there are a lot of people around that use
> it.
>
> > by setting Audiomode, but nothing helped.  I was thinking the * is
> > ONLY recognizing the DTMF if there is telco board installed.  Is it?
>
> No no, * doesn't require any hardware to be installed.
>
LET ME TRY dtmfmode=info  AND SEE WHAT HAPPENS NEXT.