[Asterisk-Users] IAX2 trunking on one side only.

[zoa]

I seem to have the same problem now,

were you able to resolve this ?

joachim.

At 22:41 6/11/2003 -0500, you wrote:
>Hello,
>
>I have searched google, read everything on the mailing list, read
>/usr/src/asterisk/README.iax and /usr/src/asterisk/doc/iax.txt(?), asked on
>the IRC channel and I cannot figure out what is wrong with my IAX2 trunk.
>
>Only asterisk2 of an <ASTERISK1>--LAN--<ASTERISK2>--PSTN will use IAX2
>trunking. If I do an "iax2 show trunk" on asterisk1 it says 0 calls on trunk
>to asterisk 2 (show channels does show the calls). If I do "iax2 show trunk"
>on asterisk2 it says 7 calls on trunk to asterisk1. I am using GSM and when
>I look at the traffic using iptraf with 7 calls active from asterisk1
>(analog phones TDM400P) to ASTERISK2 Milliwatt() I see asterisk1 transmiting
>at a little more than 30k above what asterisk2 is transmitting. I have tried
>peer/friend, notransfer(?),registration/no registration and nothing about
>the trunking issue changes. Here is my config, some please tell me what I am
>doing wrong.
>
><ASTERISK1>
>
>iax.conf
>[anistone]
>type=peer (friend/peer)
>host=172.16.1.5 (with and without this statement)
>secret=test2
>context=local2 (with and without this statement)
>trunk=yes
>
>extensions.conf
>exten => 61,1,Dial(IAX2/gateway:test at 172.16.1.5/60 at anistone)
>
>
>
><ASTERISK2>
>
>iax.conf
>[gateway] (I have tried it with this also named anistone)
>type=peer (friend/peer)
>host=172.16.1.232 (I have tried it with and without this statement)
>secret=test
>context=anistone (with and without this statement)
>trunk=yes
>
>extensions.conf
>exten => 60,1,Milliwatt()
>
>
>
>Brian J. Schrock
>Anistone Technologies, LLC
>6926 Avery Rd.
>Dublin, OH 43017
>Phone: 614-798-9106
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users