[Asterisk-Users] Sipura 2000 configuration.

Sean Cheesman scheesman at gdsworks.com
Mon Dec 22 11:34:00 MST 2003


You have SIP/lcs-sipura1 listed for both extensions in your extensions.conf.
Is this a type-o in your email?

-----Original Message-----
From: Ariel Batista [mailto:abatista at avionica.com]
Sent: Monday, December 22, 2003 1:11 PM
To: Asterisk User List
Subject: [Asterisk-Users] Sipura 2000 configuration.


Ok here is another problem I have run into.

I have a Sipura 2000 and I have been able to configure line 1 with only
one small problem.  But I can't get the line 2 working with asterisk.
Here are samples of my sip.conf and extensions.conf.  If I disable line
1 I can then get line 2 working.  Is there a sample configuration for
the Sipura to get both ports working with Asterisk.

Sip.conf

[lcs-sipura1]
context=main
username=lcs-sipura1
secret=XXXX
host=dynamic
canreinvite=no
nat=1
disallow=all
allow=ulaw
allow=alaw
;
[lcs-sipura2]
context=main
username=lcs-sipura2
secret=XXXX
host=dynamic
canreinvite=no
nat=1
disallow=all
allow=ulaw
allow=alaw

Extensions.conf

exten => 203,1,Dial(SIP/lcs-sipura1)
exten => 204,1,Dial(SIP/lcs-sipura1)
-----------------------------------------------------------------
        \
\____\_     Ariel Batista
/        /        IS Director
        /         Avionica, Inc.
------------------------------------------------------------------
abatista at avionica.com
Ph: 786-544-1114
Fx: 305-574-0212

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list