[Asterisk-Users] SIP / X-ten Softphone

[PBX]

Andrew---

Thank you for the Sjphone insight.  I am liking this much better.  I can
register and call a extension now.  I am having other issues. I'm sure
it's just config issues though.

Thanks...  

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Andrew
Thompson
Posted At: Thursday, December 18, 2003 11:16 PM
Posted To: Asterisk User Group
Conversation: [Asterisk-Users] SIP / X-ten Softphone
Subject: Re: [Asterisk-Users] SIP / X-ten Softphone


As with any debugging, you should try steps seperately...

----- Original Message -----
From: "PBX" <pbx at tuxnetworking.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, December 18, 2003 10:42 PM
Subject: [Asterisk-Users] SIP / X-ten Softphone

> [1005]
> type=friend
> secret=1005
> host=dynamic
> mailbox=1005
> context=default

Add user=1005 to this sip.conf definition.

>
> X-Lite Softphone
>
> Network->Out Bound SIP Proxy: (IP of *)
>
> SIP Proxy->Default->Enabled: Yes
> SIP Proxy->Default->UserName: 1005
> SIP Proxy->Default->Password: 1005
> SIP Proxy->Default->Domain/Realm: (IP of *)
> SIP Proxy->Default->SIP Proxy: (IP of *)
> SIP Proxy->Default->Send Internal IP: Always

Take a look at some screenshots of X-Lite configs. I remember there
being a line or two that wanted to have :5060 after the IP.

As a side note, I gave up on X-Lite. I found it difficult to navigate
the configuration menus, and there was a background hum that isn't there
if I use sjphone, diax, or iaxcomm/iaxclient.

----
Andrew Thompson http://aktzero.com/

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users