[Asterisk-Users] SIP / X-ten Softphone

[Andrew Thompson]

Typo...

----- Original Message -----
From: "Andrew Thompson" <asteriskuser at aktzero.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, December 18, 2003 11:16 PM
Subject: Re: [Asterisk-Users] SIP / X-ten Softphone


> As with any debugging, you should try steps seperately...
>
> ----- Original Message -----
> From: "PBX" <pbx at tuxnetworking.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Thursday, December 18, 2003 10:42 PM
> Subject: [Asterisk-Users] SIP / X-ten Softphone
>
> > [1005]
> > type=friend
> > secret=1005
> > host=dynamic
> > mailbox=1005
> > context=default
>

Add username=1005 to this sip.conf definition.

>
> >
> > X-Lite Softphone
> >
> > Network->Out Bound SIP Proxy: (IP of *)
> >
> > SIP Proxy->Default->Enabled: Yes
> > SIP Proxy->Default->UserName: 1005
> > SIP Proxy->Default->Password: 1005
> > SIP Proxy->Default->Domain/Realm: (IP of *)
> > SIP Proxy->Default->SIP Proxy: (IP of *)
> > SIP Proxy->Default->Send Internal IP: Always
>
> Take a look at some screenshots of X-Lite configs. I remember there being
a
> line or two that wanted to have :5060 after the IP.
>
> As a side note, I gave up on X-Lite. I found it difficult to navigate the
> configuration menus, and there was a background hum that isn't there if I
> use sjphone, diax, or iaxcomm/iaxclient.

----
Andrew Thompson http://aktzero.com/