[Asterisk-Users] Cisco 7960 - can't traverse NAT?

[Paul Mahler]

In default.cnf for the 7960 I have

# NAT/Firewall Traversal
nat_enable: 1                   ; 0-Disabled (default), 1-Enabled


The sip.conf entry shouldn't matter, should it? I start a telnet session to
the phone. Then I run ping from the phone to the Internet. I can't ping
anything past the router. I can ping everything on the LAN. I'm doing this
before I've even started Asterisk. 


 
Paul Mahler 
mail:pmahler at signate.com
phone: 650.207.9855
fax: 877.408.0105

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Brian West
Sent: Thursday, December 18, 2003 4:38 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Cisco 7960 - can't traverse NAT?

using nat=yes in sip.conf?

and nat processing on? on the 7960 that is.

bkw

On Thu, 18 Dec 2003, Paul Mahler wrote:

> I have a 7960 running behind a firewall running NAT. From a telnet session
> to the 7960, I can't ping anything outside the subnet the 7960 is on, that
> is anything on the WAN side of the router. Other devices on the subnet get
> out to the WAN just fine.
>
> Has anyone else had this problem or know how to fix it?
>
> Thanks in Advance,
>
> Paul
>
>
> Paul Mahler
> mail:pmahler at signate.com
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users