[Asterisk-Users] Re: Zaprtc compile error - virtual device for Conferencing

[Kannaiyan Natesan]

Thanks for the reply but it could not solve my problem.

> Did you modprobe ztdummy?

modprobe ztdummy
modprobe: Can't open dependencies file /lib/modules/2.4.20-6um/modules.dep
(No such file or directory)

Can you please guide me what should I do for this?

> It should return nothing(successfully). Confirm that it is loaded with
> lsmod.

> lsmod
Module                  Size  Used by    Not tainted
lsmod: QM_MODULES: Function not implemented

> You'll also need to put that line in an init script so that it gets loaded
> into memory again when you reboot.

     Can you please add a line how can I add that.

> ztdummy uses info from the USB bus.

I'm not sure USB bus available on the system. Since I could not modprob
ztdummy

> zaprtc uses the realtime clock of your pc.

I want to setup my conference bridge running.

Kannaiyan


> > Hi,
> >
> >    I don't have a zaptel device for conferencing.
> >    I read from the lists, that
> >
> >       ztdummy and zaprtc need to be installed to get conferencing.
> >
> >     I could able to compile successfully with ztdummy and when i receive
> the
> > call it says,
> >
> >       -- Goto (13732,s,1)
> >     -- Executing MeetMe("SIP/-08118800", "1234") in new stack
> >   == Parsing '/etc/asterisk/meetme.conf': Found
> > WARNING[245776]: File app_meetme.c, Line 162 (build_conf): Unable to
open
> > pseudo channel
> >     -- Playing 'conf-invalid' (language 'en')
> >
> >     i read from the lists, that I need to install zaprtc to solve this
> > problem.
> >
> >      when i try to compile zaprtc, which i got from
> >
> > http://www.junghanns.net/asterisk/downloads/zaprtc.0.0.1.tar.gz
> >
> > It gives me the following error,
> >
> > zaprtc.c:1077: warning: implicit declaration of function `barrier'
> > zaprtc.c:1078: warning: implicit declaration of function `cpu_relax'
> > zaprtc.c: At top level:
> > zaprtc.c:109: storage size of `rtc_irq_timer' isn't known
> > zaprtc.c:719: storage size of `rtc_fops' isn't known
> > zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but
> never
> > defined
> > make: *** [zaprtc.o] Error 1
> >
> > Can anyone please guide me how to compile zaprtc.
> >
> >
>
> Did you modprobe ztdummy?
> It should return nothing(successfully). Confirm that it is loaded with
> lsmod.
>
> You'll also need to put that line in an init script so that it gets loaded
> into memory again when you reboot.
>
>
> ztdummy and zaprtc serve the same purpose, but go about it different ways.
> They both provide a timing source.
> ztdummy uses info from the USB bus.
> zaprtc uses the realtime clock of your pc.
>
> -----
> Andrew Thompson http://aktzero.com/
> Your eyes are weary from staring at the CRT. You feel sleepy. Notice how
> restful it is to watch the cursor blink. Close your eyes. The opinions
> stated above are yours. You cannot imagine why you ever felt otherwise.
>
>
>
>
>
> --__--__--
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> End of Asterisk-Users Digest
>