[Asterisk-Users] Unable to Receive Fax -- RxFAX Application

[Kannaiyan Natesan]

Hi,

  Below if the error message which I got from asterisk.
  I was trying to fax to asterisk from my fax machine. I really dunno what
is the problem. I use alaw & ulaw codec only through my ATA 186. Can anyone
help me what could be the problem.


    -- Executing Goto("SIP/-080ef9a0", "13732|s|1") in new stack
    -- Goto (13732,s,1)
    -- Executing Wait("SIP/-080ef9a0", "2") in new stack
    -- Executing Answer("SIP/-080ef9a0", "") in new stack
    -- Executing RxFAX("SIP/-080ef9a0", "/root/kans.tif") in new stack
Changed from phase 0 to 1
NOTICE[278543]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support
incomplete.  Turn off on client if possible
NOTICE[278543]: File rtp.c, Line 264 (process_rfc3389): RFC3389 support
incomplete.  Turn off on client if possible
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Store and forward Internet fax: no
Real-time Internet fax: no
Preferred octets: 256
Can receive fax
Data signalling rate: V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Inch-based resolution preferred: no
Metric-based resolution preferred: no
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 c6 f0 80 80 01
NOTICE[278543]: File rtp.c, Line 418 (ast_rtp_read): Unknown RTP codec 100
received

Thanks in advance,
Kannaiyan