[Asterisk-Users] Help! VoiceTronix Multi FXO/FXS Problem

[Jacky]

Hello, Hacker

I install VoiceTronix OpenSwitch 12 port PCI Telephone Card,
and setting vpb.conf, extensions.conf following

My problem is:

When i dial to fxo(channel 9-12), it is ok,
but when i continue press exten 102, the channel crach with error messages
following
exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872

Do i ignore some setting for VoiceTronix OpenSwitch12 Card, Or other issues?



******
Call status
----------------------------------------------------------------------------
----------------------
    --  Event [0=>[08] Ring
] on vpb/1-9
    -- Executing Wait("vpb/1-9", "1") in new stack
 Read_channel ##  vpb/1-9: Setting record mode, bridge = 0
    --  Event [0=>[08] Ring
] on vpb/1-9
    -- Executing Answer("vpb/1-9", "") in new stack
    -- Executing DigitTimeout("vpb/1-9", "5") in new stack
    -- Set Digit Timeout to 5
    -- Executing ResponseTimeout("vpb/1-9", "10") in new stack
    -- Set Response Timeout to 10
    -- Executing BackGround("vpb/1-9", "demo-congrats") in new stack
    -- Playing 'demo-congrats' (language 'en')
    --  Event [8=>[08] DTMF digit: 1
] on vpb/1-9
    --  Event [2=>[08] Tone Detect: Grunt
] on vpb/1-9
    --  Event [8=>[08] DTMF digit: 0
] on vpb/1-9
    --  Event [8=>[08] DTMF digit: 2
] on vpb/1-9
    --  Event [2=>[08] Tone Detect: Grunt
] on vpb/1-9
  == CDR updated on vpb/1-9
    -- Executing Dial("vpb/1-9", "vpb/1-2|20|tT") in new stack
 Read_channel ##  vpb/1-2: Setting record mode, bridge = 0
    --  1-2 requested, got: [vpb/1-2]
    --  VPB Calling 1-2 [t=0] on vpb/1-2 returned 0
    -- Called 1-2
    -- vpb/1-2 is ringing
exception caught: VPBAPI_DIAL_INVALID_LEVEL, file: vpbdial.cpp line:872



(1) vpb.conf
----------------------------------------------------------------------------
---------------------------
[interfaces]

echocancel = on
board = 1

context = vpbtest

; Note that V6PCI channel numbers start at 7!
mode = fxo
channel = 9

mode = dialtone
channel = 1
channel = 2
channel = 3
channel = 4
channel = 5
channel = 6
channel = 7
channel = 8


(2) extensions.conf
----------------------------------------------------------------------------
-----------------------------------------
......original exten so ignore...

[vpbtest]
include => default
exten => 102,1,Dial(vpb/1-2,20,tT)
exten => 102,2,Hangup