[Asterisk-Users] Re: estara softphone problem

Bisker, Scott (7805) sbisker at harvardgrp.com
Mon Dec 15 13:44:02 MST 2003


Could you post the console output from when you run the softphone application?  Maybe there is a problem with registration.

-sb


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Hao Zhong
Sent: Friday, December 12, 2003 5:16 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Re: estara softphone problem


Hi Scott, my 7960s can call each other without any
problem. I changed ip.conf as you recommended, and
still didn't work. But from "sip show peers", it looks
like my softphone is not talking to asterisk properly.
Asterisk got the softphone's IP address, but its
status is "unreachable", I'm trying to figure out why.
Line-8001 till Line-8004 are Cisco 7960s (two phones,
each with two lines defined), they seem to be OK.

Monet*CLI> sip show peers
Name/username    Host                 Mask            
Port     Status    
8005/8005        10.26.6.78      (D)  255.255.255.255 
5060     UNREACHABLE
Line-8004/Line-  10.26.6.198     (D)  255.255.255.255 
5060     OK (51 ms)
Line-8003/Line-  10.26.6.198     (D)  255.255.255.255 
5060     OK (51 ms)
Line-8002/Line-  10.26.6.129     (D)  255.255.255.255 
5060     OK (41 ms)
Line-8001/Line-  10.26.6.129     (D)  255.255.255.255 
5060     OK (41 ms)

Here is the console message when I made a call from
the softphone to the Cisco 7960 (which was
successful).

    -- Executing Macro("SIP/8005-4971",
"stdexten|8001|SIP/Line-8001") in new stack
    -- Executing Dial("SIP/8005-4971",
"SIP/Line-8001|20|t") in new stack
    -- Called Line-8001
    -- SIP/Line-8001-f19d is ringing
  == Spawn extension (macro-stdexten, s, 1) exited
non-zero on 'SIP/8005-4971' in macro 'stdexten'
  == Spawn extension (default, s, 1) exited non-zero
on 'SIP/8005-4971'

And here is the console message when I tried to call
the softphone from Cisco 7960 (which failed).

    -- Executing Dial("SIP/Line-8001-d450",
"SIP/8005") in new stack
  == Everyone is busy at this time


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On
Behalf Of Bisker, Scott
Sent: Friday, December 12, 2003 3:46 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] estara softphone problem




__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list