[Asterisk-Users] RH9 and h323.conf

[iTS Consult at ncy]

Thanks for your answer. I recieved another answer to Use 1.12.02 and
1.05.02. Let me try this tomorrow. About the gatekeeper registration . This
is working fine... Only once.. When I register with the gk it will allow any
endpoint to call only once than I need to reset the gk. Maybe this is due to
the same openh323 and pwlib version. If I get it working with h323 I let you
know. I spoke with the Asterisk digium helpdesk through 500 and yes it
worked. They told me that h323 seems like a dying protocol and I should use
SIP. Some ancient discussion that I rather like to avoid. ( My thousands of
satisfied customers will kill me if this is true)  Also that any written
information On h323 will become available in about 1 month or so . Maybe
this info is usefull. Thanks again for your answer, Tjapko.

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of SW
Sent: Sábado, 13 de Diciembre de 2003 04:42 a.m.
To: Asterisk-Users at Lists. Digium. Com
Subject: [Asterisk-Users] RH9 and h323.conf


Tjapko,

I am kinda new here, too. Let me try to help you out here.

First, most people would not give a second look at your posting because
there are tons of past reference in the list advising people not to use
openh323  1.12.0, pwlib 1.5.0. If you do that you are on your own. That's
what README says.

Also there were many postings advising not to use redhat9. So best bet is to
follow exactly what is said in the Readme file.

Having said that, I did install chan_h323 on a redhat 9, openh323 1.12.0 and
pwlib 1.5.0. And it worked :). What I am doing is allowing my SIP clients to
dial out through h.323. So I do not know other stuff would work or not (like
gatekeeper registration, incoming towards * etc.).

Dial string that you are supposed to use in extensions.conf to call out to a
g/w is as follows

exten => 91xxxxxxxxx,1,Dial(h323/${Exten:1}@gwipadddress)

This did not work for me, so I tried

exten => 91xxxxxxxxx,1,Dial(h323/h323:${Exten:1}@gwipaddress) and it worked.

I do not know what the best cause of action for you, I am just sharing my
experience.

Hope this will help you.

Cheers

SW


Message: 7
Date: Fri, 12 Dec 2003 17:11:18 -0400
From: its Consultancy <itsc99 at cantv.net>
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] RH9 and h323.conf
Reply-To: asterisk-users at lists.digium.com

Hello everybody,

First time installer and I need the lists advice. My plan is to use
asterisk PBX with some hardware to terminate my calls coming from
several operational gnugk gatekeepers.

Do have RH9 and downloaded the latest asterisk from CVS. Compiled
according instructions and is running fine.

Could hardly find any info on h323 implementation untill the REAME in
the channels directory.

I am an experienced openh323 gatekeeper user so do have good compiled
libraries of openh323 and pwlib on my box.  Version 1.5.0 and 1.12.0 to
be exact.

Ran the make in the h323 directory and compile seems to run fine.

Than I ran the make install in the asterisk library again and this also
went without problems.

Ran asterisk but problems finding a h323.conf file. Since there is  NO
sign of a h323.conf file in the etc/asterisk directory I copied this one
manually from the channels/h323 directory.

After starting asterisk again with a unconfigured default h323.conf ini
file it seems to run ok ; the message is this :

[chan_h323.so] => (The NuFone Network's Open H.323 Channel Driver)
  == Parsing '/etc/asterisk/h323.conf': Found
  == Creating H.323 Endpoint
  == Registered channel type 'H323' (The NuFone Network's Open H.323
Channel Driver)
  == H.323 listener started
  == Parsing '/etc/asterisk/enum.conf': Found
Asterisk Ready.

Before I go further configuring the PBX and configuring the gatekeeper
that has to route the calls to the PBX I would like to know if there is
anybody with experience on RH9 that has good results with this (h323)
configuration and if my whole way of implementing the thing was OK?
Furthermore I would like to know if there is a good h323 implementation
guide somewhere available like an extension on the Asterisk Handbook
Project that has some very usefull information but lacking h323
information. ( I read the 71 pages!)

Thanks, Tjapko.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.545 / Virus Database: 339 - Release Date: 27/11/2003

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.545 / Virus Database: 339 - Release Date: 27/11/2003