[Asterisk-Users] Re: estara softphone problem
Hao Zhong
hao_zhong at yahoo.com
Fri Dec 12 15:16:01 MST 2003
Hi Scott, my 7960s can call each other without any
problem. I changed ip.conf as you recommended, and
still didn't work. But from "sip show peers", it looks
like my softphone is not talking to asterisk properly.
Asterisk got the softphone's IP address, but its
status is "unreachable", I'm trying to figure out why.
Line-8001 till Line-8004 are Cisco 7960s (two phones,
each with two lines defined), they seem to be OK.
Monet*CLI> sip show peers
Name/username Host Mask
Port Status
8005/8005 10.26.6.78 (D) 255.255.255.255
5060 UNREACHABLE
Line-8004/Line- 10.26.6.198 (D) 255.255.255.255
5060 OK (51 ms)
Line-8003/Line- 10.26.6.198 (D) 255.255.255.255
5060 OK (51 ms)
Line-8002/Line- 10.26.6.129 (D) 255.255.255.255
5060 OK (41 ms)
Line-8001/Line- 10.26.6.129 (D) 255.255.255.255
5060 OK (41 ms)
Here is the console message when I made a call from
the softphone to the Cisco 7960 (which was
successful).
-- Executing Macro("SIP/8005-4971",
"stdexten|8001|SIP/Line-8001") in new stack
-- Executing Dial("SIP/8005-4971",
"SIP/Line-8001|20|t") in new stack
-- Called Line-8001
-- SIP/Line-8001-f19d is ringing
== Spawn extension (macro-stdexten, s, 1) exited
non-zero on 'SIP/8005-4971' in macro 'stdexten'
== Spawn extension (default, s, 1) exited non-zero
on 'SIP/8005-4971'
And here is the console message when I tried to call
the softphone from Cisco 7960 (which failed).
-- Executing Dial("SIP/Line-8001-d450",
"SIP/8005") in new stack
== Everyone is busy at this time
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On
Behalf Of Bisker, Scott
Sent: Friday, December 12, 2003 3:46 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] estara softphone problem
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
More information about the asterisk-users
mailing list