[Asterisk-Users] ZT_CHANCONFIG failed on channel 2

[asterisk at hamel.net]

Hi,

Thank you for the reply, actually the cards installed are a TDM400P (Single
port) and an X100P. 

I don't need to power down the PCI cards by turning of the PC, a simple
"shutdown -r now" does it.

-bh

Quoting Tilghman Lesher <tilghman at mail.jeffandtilghman.com>:

> On Thursday 11 December 2003 17:42, asterisk at hamel.net wrote:
> > [root at asterisk asterisk]# service zaptel start
> > Loading zaptel framework:  [  OK  ]
> > Loading zaptel hardware modules: wcfxo wcusb
> > Running ztcfg:  ZT_CHANCONFIG failed on channel 2: No such device
> > or address (6) [FAILED]
> 
> Typically this means that the driver cannot detect the device.  Since
> it is the S100U that seems to be undetected, try unplugging it,
> waiting 20 seconds, and plugging it back in.
> 
> -Tilghman
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by The CCIS.net MailScanner, and is
> believed to be clean.
> 
> 
> -- 
> This message has been scanned for viruses and
> dangerous content by the Bugs.Hamel.Net MailScanner, 
> and appears to be clean.
> 
> 


-- 


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

-- 
This message has been scanned for viruses and
dangerous content by the Bugs.Hamel.Net MailScanner, 
and appears to be clean.