[Asterisk-Users] FAX application does not work for me....

[Jon Carnes]

Just for a lark I typed in the error message below (from you logs) into
google:
http://www.mail-archive.com/asterisk-users@lists.digium.com/msg13622.html

This might be of use to you.

Hope it helps - Jon Carnes

On Thu, 2003-12-11 at 11:03, Dan wrote:
> Hi,
> 
> I have tried to install and configure the FAX app using the steps described
> in several mails on this list.
> When a FAX call arrives on X100P, the fax extension is executed, which looks
> like:
> 
> exten => fax,1,RxFax(/var/spool/asterisk/incoming/${CALLERIDNUM}.tif)
> exten => fax,2,Hangup
> 
> It tries to negociate, but nothing is received at the end and the other part
> times out.
> More, after this I need to manually stop and start * in order to free up the
> phone line.
> 
> Can someone (who suceed using this) all the library needed to run this app,
> including their versions?
> Maybe I have missed something.
> 
> If I redirect the fax to a physical fax machine connected to an ATA or
> TDM400 it works, so it is not an issue with the X100card (echo or something
> else)
> 
> Best regards,
> Dan
> P.S. This is the log in the * console:
> 
> *CLI> -- Starting simple switch on 'Zap/1-1'
>     -- Executing Answer("Zap/1-1", "") in new stack
>     -- Executing Ringing("Zap/1-1", "") in new stack
>     -- Executing Wait("Zap/1-1", "3") in new stack
>     -- Redirecting Zap/1-1 to fax extension
>   == Spawn extension (in-pstn, fax, 0) exited non-zero on 'Zap/1-1'
>     -- Executing RxFAX("Zap/1-1",
> "/var/spool/asterisk/incoming/0722123456.tif") in new stack
> Changed from phase 0 to 1
> Start receiving document
> Changed from phase 1 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T4 timeout in state 9
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T2 timeout
> Start receiving document
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T4 timeout in state 9
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T2 timeout
> Start receiving document
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> T2 timeout
> Start receiving document
> Changed from phase 3 to 4
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> T4 timeout in state 9
> Sending ident
> >>> CSI: 40 38 37 36 35 34 33 32 31 20 20 20 20 20 20 20 20 20 20 20 20
> DIS:
> Store and forward Internet fax: no
> Real-time Internet fax: no
> Preferred octets: 256
> Can receive fax
> Data signalling rate: V.29
> R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> 2D coding OK
> Scan line length: 215mm
> Recording length: A4 (297mm)
> Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
> R8x15.4lines/mm OK
> Inch-based resolution preferred: no
> Metric-based resolution preferred: no
> Minimum scan line time for higher resolutions: T15.4 = T7.7
> >>> DIS: 80 00 c6 f0 80 80 01
> HDLC underflow in state 9
> Changed from phase 4 to 3
> <<< DCN: fb
> DCN with final frame tag
> In state 9
> Disconnecting
> Changed from phase 3 to 7
>     -- Hungup 'Zap/1-1'
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users