[Asterisk-Users] Error setting up USB FXS

[Roy Sigurd Karlsbakk]

hi all

Using a vanilla 2.4.23, I try to setup the USB FXS interface to add an
old gray 1960 rotary dial phone for a demo. But it doesn't work :(

Can someone decipher the below messages and help me out here?

Please ask if more info is needed

roy

usb.c: kusbd: /sbin/hotplug add 4
usb.c: kusbd: /sbin/hotplug add 4
usb.c: kusbd: /sbin/hotplug add 4
usb.c: kusbd: /sbin/hotplug add 4
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
Zapata Telephony Interface Registered on major 196
usb.c: registered new driver wcusb
wcusb: wc_detect_device
Second exit
host/usb-uhci.c: ENXIO 80000400, flags 0, urb f710eec0, burb f79a32c0
wcusb: Error executing control: status=-6
wcusb: Failed to initialize proslic
wcusb: Hardware intialization failed.
cleanup
Wildcard USB FXS Interface driver registered
host/usb-uhci.c: ENXIO 80000480, flags 0, urb f79a32c0, burb f79a3540
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 535 ret -6
host/usb-uhci.c: ENXIO 80000480, flags 0, urb f79a32c0, burb f79a3540
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
host/usb-uhci.c: ENXIO 80000480, flags 0, urb f79a3540, burb f79a32c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
host/usb-uhci.c: ENXIO 80000480, flags 0, urb f710e240, burb f710edc0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000480, flags 0, urb f710e240, burb f710edc0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 18 ret -6