[Asterisk-Users] was FXO cards
Ariel Batista
abatista at avionica.com
Wed Dec 10 06:52:33 MST 2003
I have a strange but do-able Idea.
There is a box Called MediaTrix that gives you 4 FXO ports. It's called the
1204. Your set this unit up to forward the incoming number to your asterisk
system. Then on the Asterisk box you put 2 X100P cards. The Mediatrix is
under $ 700.00 and it works. I am using one of them and configured it with
SIP Sean help me out with this unit from NetXusa. In fact I think he has
other FXO box's that can work lowering your cost and not having to put so
many boards into your Asterisk box. Sean help us out here with a good box
Idea. I have lots of Dialogic boards I there not good for Asterisk.
Hopefully by the beginning of the year Digium will have there 4 port FXO
board done! It would really be nice to be able to mix and match it like 2
FXS, and 2 FXO ports on it!
I have also found and am working on getting a small blue box about 3X8X8
800mhz VIA chip set system running. It has one PCI slot. This will make a
great Asterisk server! Better then the Xbox setup. Smaller and not
branded!
Good luck.
----- Original Message -----
From: "Michael Rowley" <os2doc at bellsouth.net>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, December 09, 2003 9:48 PM
Subject: [Asterisk-Users] was FXO cards
> Hey guys,
>
> appreciate the input. Here are some thoughts.
>
> ADSI phones are out of the question. This is a business environment, I
> can't worry about my employees not knowing how to forward calls, answer
> calls when away from the multiline phone, and no ADSI phone will handle
> multiple lines that I have found.
>
> I would love to put 6 X100P cards in a case and run asterisk on it.
> but...
>
> I hate the idea of running a channel bank. It just seems unecessary,
> and more crap to break, set up, and buy.
>
> DIalogic 4 and 12 port cards are expensive. The 12 port prohibitively
> so, so I think I would be better off getting 2 of the 4 port cards. I
> have found them for <900$ apiece on ebay.
>
> That compairs as:
>
> Case 1 Channel bank
>
> Asterisk box: 500$ (provably less than this, as it is a minimal machine)
> T100P card: 500$
> Channel Bank 600$ (actually, from what I can find, provably more like
> 1000$ before I am done)
> Phones: I am going to go with the Mitel Networks 5055, they are about
> 400$ apiece.
> Total: 1600$ for the setup (to 2000$) + 2000K for 5 phones.
>
> Case 2: FXO cards
>
> Asterisk box 500$
> Dialogic 4 port card 900$
> Phones: same as the above
> Total 1400$ plus phones, 2K$ for 5 phones.
>
> Case 3 proprietary system
>
> Mitel 3100 server: 3K
> Phones: 250$ apiece, 1250$ total.
> 4250$ total.
>
> Case 1 and 2 are ties in my eyes, except the channel bank would
> provably be cheaper to upgrade to 8 lines. I am just afraid of the
> channel bank. I just don't know anything about them. If I buy the
> wrong crap, it gets really expensive fast, plus adds another layer of
> complexity.
>
>
> Michael Rowley MD
> FP
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list