[Asterisk-Users] some success with linux 2.6 and wcfxo

[Tristan 'Minty' Colgate]

Hi,

  In the mail that got held up in moderation I did mention this, I've had one
other user attempt to use my patches and he hit devfs problems too, I
personally don't use devfs at all so I haven't hit these issues.

On Mon, Dec 08, 2003 at 09:35:17PM -0500, Ray Russell Reese III wrote:
> I've attempted to get zaptel to compile with no success.  zaptel.c won't
> compile because of many references to devfs, which from my understanding
> was stipped down to nothing in 2.6 in favor of udev. Following is a
> snipit of some of the devfs errors:
> 
> root at milton:~/zaptel# make -C /usr/src/linux SUBDIRS=`pwd` modules 2>&1
> | more
> make: Entering directory `/usr/src/linux-2.6.0-test11'
> *** Warning: Overriding SUBDIRS on the command line can cause
> ***          inconsistencies
> make[1]: `arch/i386/kernel/asm-offsets.s' is up to date.
>   CC [M]  /root/zaptel/zaptel.o
> In file included from /root/zaptel/zaptel.c:79:
> /root/zaptel/zaptel.h:1068: error: syntax error before "devfs_handle_t"
> /root/zaptel/zaptel.h:1068: warning: no semicolon at end of struct or
> union
> /root/zaptel/zaptel.h:1069: warning: type defaults to `int' in
> declaration of `fhandle_symlink'
> /root/zaptel/zaptel.h:1069: warning: data definition has no type or
> storage class
> /root/zaptel/zaptel.h:1198: error: syntax error before "devfs_handle_t"
> /root/zaptel/zaptel.h:1198: warning: no semicolon at end of struct or
> union
> /root/zaptel/zaptel.h:1207: error: syntax error before '}' token
> 
> I've applied the patch in your earlier post, plus the Makefile. Is there
> anything specific I'm missing? Thanks.
> 
> - Russ
> 
> 
> On Mon, 2003-12-08 at 04:08, Tristan 'Minty' Colgate wrote:
> > The original mail with the Makefile and my comments has been held up waiting
> > for mdoeration, it's probably a little to big. Here is just the makefile
> > without all my previous ranting.
> > 
> > From the normal zaptel source, do a normal build, backup tones.h and the
> > makefile, do a make clean, moves tones.h back, then copy this Makefile over the
> > top of the old one, you can then use something like...
> > 
> > make -C /usr/src/linux SUBDIRS=`pwd` modules
> > 
> > That should build your .ko files, modules_install doesn't work, it all assumes
> > your kernel source is in /usr/src/linux (it should really be using
> > /lib/modules/`uname -r`/build, but I haven't tested that).
> > 
> > 
> > BASEADDR=0xd0000
> > DEFAULTZONE=0
> > CFLAGS+=-DSTANDALONE_ZAPATA
> > CFLAGS+=-I/usr/src/linux -I/usr/src/linux/include/asm/mach-default -I. -O4 -g -Wall -DBUILDING_TONEZONE #-DTONEZONE_DRIVER
> > CFLAGS+=$(shell if uname -m | grep -q ppc; then echo "-fsigned-char"; fi)
> > CFLAGS+=-DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/usr/src/linux/drivers/net \
> > 	-Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/usr/src/linux/drivers/net/wan -I /usr/src/linux/include -I/usr/src/linux/include/net
> > CFLAGS+=-DECHO_CAN_MARK2
> > CFLAGS+=-DTORMENTA_BASE=$(BASEADDR)
> > 
> > CFLAGS+=-DDEFAULT_TONE_ZONE=$(DEFAULTZONE)
> > CFLAGS+=-D__SMP__
> > 
> > obj-m += zaptel.o wcfxo.o wcfxs.o ztdynamic.o ztd-eth.o wct1xxp.o wct4xxp.o ztdummy.o
> > PRIMARY=wcfxo
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Tristan 'Minty' Colgate
<minty at deadweb.net> | ICQ #154577755
-----------
  "I don't mean to sound bitter, cold, or cruel, but
 I am, so that's how it comes out"
				- Bill Hicks