[Asterisk-Users] Forwarding a call to another FXO port

[Tim Thompson]

I would change the option number to something else because 9 is often
picked up in another context as "9NXXNXXXXX" 

You might have to make a sub menu in order to get there, but try using
2-8 for the menu options.




Tim Thompson
Commercial Sales Engineer
http://www.amatechtel.com
(806) 722-2227


-----Original Message-----
From: Raymond McKay [mailto:asterisk at raynettech.com] 
Sent: Wednesday, December 03, 2003 12:59 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Forwarding a call to another FXO port

Greetings,

I'm trying to setup an option in my greetingmenu that would allow the
caller to select this particular option for emergency calls.  That
option would dial out on an available PSTN line to a cell phone number.

Currently it is setup as such

exten => 9,1,Dial(Zap/g1/<CELLPHONENUMBER> where <CELLPHONENUMBER> is
the number it is calling out to.

When option 9 is selected, a horrible feedback noise is heard and caller
cannot hear anything else.  The cell phone that the call is going to
does ring and can be answered and hears the same noise.

Hardware on this is Asterisk Box -> T100P -> Adtran750
FXO channels are 1 and 2 set in group = 1
Both channels otherwise operate normally
echocancel = 64
echocancelwhenbridged = no

Any ideas?

Raymond McKay
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users