[Asterisk-Users] Echo: X100P vs. Cisco FXO cards

[Brian West]

I get no echo on my X100P's..... and Dont crank it up to 256 leave it at
128 and check the ring and tip of your phone line.  The x100p can't
correct them if they are reversed.

bkw

On Mon, 1 Dec 2003, Jay Brussels wrote:

> I have started to test Asterisk and so far I am very impressed.
> My only problem right now is an unacceptable echo with a X100P card.
> I have read the previous posts regarding echo cancellation, tried
> echotraining, all the tap settings for echocancel (echocancel=256 sounds
> wild!!!)  and I would like to know if anyone that has had a problem with
> echo has successfully overcome this with a Cisco Router with the FXO cards
> in place of the X100P?
>
> I have two 2620's not being used and I an thinking of buying FXO cards
> rather than buying a T-1 card and channel bank.
>
> Suggestions appreciated.
>
> Jay
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>