[Asterisk-Users] Asterisk stops responding

[James Sizemore]

I have seen similar problems with using Asterisk as a voip UA (though 
not as bad or predictable as you.) The *8# bug was causing the bulk of 
my problems.
http://bugs.digium.com/bug_view_page.php?bug_id=0000116




David Harris wrote:

>Anyone have any thoughts on why versions of asterisk I try (4 so far)
>after CVS-07/18/03 always end up locking up on me... which means no sip
>clients can register/re-register and if I type "reload" or "stop now" at
>the cli it just returns and does nothing.
>
>I have experienced this same issue on three separate boxes.  Two running
>RedHat 9 and one running Redhat 8.  
>
>I don't have any digium cards installed.  I use SIP only.  I use cisco
>IP phones and cisco sip voice gateways.  I have experienced the issue
>while using ztdummy and zaprtc as well as neither.
>
>The lockup occurs once every 2 hours or so during heavy use, which is
>like 50 calls an hour and people checking their voicemail and such.
>During off hours like the weekend it usually doesn't even crash at all
>even though we do have some call volume. probably like 20 calls all
>weekend.
>
>CLI commands such as "sip show peers", "show channels", "show modules",
>still return results.
>
>Thanks,
>
>David Harris
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>