AW: [Asterisk-Users] additional digit in front of the dialedextenesion by outgoing pri/E1 call

[Thomas Haeger]

Thanks!
It works :-)

Regards,

Thomas.

-----Ursprüngliche Nachricht-----
Von: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thilo
Salmon
Gesendet: Freitag, 29. August 2003 14:11
An: asterisk-users at lists.digium.com
Betreff: Re: [Asterisk-Users] additional digit in front of the
dialedextenesion by outgoing pri/E1 call


Thomas,

> If the call going out the pri dials with an additional '0' before the
dialed
> number.
> This is for caller number AND called number. But i can't see anything that
> says set a '0' more in front of the dialed extension.

While this may look o little odd, this is really the expected behaviour.
You can change the number format on PRI channel by setting pridialplain
in /etc/astersik/zapata.conf. The pridialplan setting goes into the
'type of number' field. Apparently, your numbers are treated as
'national'. You could try to change pridialplan to 'local', if you want
to dial numbers the same way you do on an analog line (and your telco
supports it). You can turn on pri debugging and take a look at the setup
messages to find out what you are signalling to your telco.

If there is a whishlist, it would be very helpful to set the TON/NPI
fields on a per call basis rather than haveing a global setting. Has
anybody done that yet?

Thilo





_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users