[Asterisk-Users] VAD (silence suppression) on Asterisk

[Brian West]

 Comfort Noise and VAD are diffrent things.

bkw

On Wed, 20 Aug 2003, Eduardo Goncalves wrote:

>
> 	When I turn on VAD on cisco ATA186, asterisk shows:
>
> 	Aug 20 11:12:20 NOTICE[618513]: File rtp.c, Line 239 (process_rfc3389): RFC3389 support incomplete.  Turn off on client if possible
>
> 	RCF3389 defines Payload for Comfort Noise, that is used with VAD.
> 	So I turned it off on my endpoints (ATA186 and c827-4v)
>
>
> Eduardo
>
>
> On Wed, 20 Aug 2003 11:35:14 -0500 (CDT)
> Brian West <brian at bkw.org> wrote:
>
> > VAD is evil. I hate it.  I find when we used it.. you keep asking people
> > to repeat stuff all the time.. and it was just anoying.
> >
> > bkw
> >
> > On Wed, 20 Aug 2003, WipeOut . wrote:
> >
> > > > Does the Asterisk server support VAD (aka Silence Suppression)? I want my SIP phones (7960's) to use VAD when dialing out the x100P interface. I know the phone can do VAD , can the Asterisk server be setup to do it? and if so, where do I set the configuration?
> > > >
> > > > Thanks
> > > >
> > > Lee Goodman
> > >
> > > Somthing tells me that it is not supported but it is somthing that I would like to see supported as well..
> > > --
> > > ______________________________________________
> > > http://www.linuxmail.org/
> > > Now with e-mail forwarding for only US$5.95/yr
> > >
> > > Powered by Outblaze
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>