[Asterisk-Users] Using OH323 and Gatekeeper

[John Bigelow]

Use the gatekeeper ip in the extention that you are dialing in
extensions.conf

exten => 100,1,Dial,H323/user at IPofGK

----- Original Message ----- 
From: "Langley, Sean" <Sean.Langley at gdcanada.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, August 01, 2003 5:46 PM
Subject: [Asterisk-Users] Using OH323 and Gatekeeper


> Hello all,
>
> Please forgive me if this sounds a little (or a lot) ignorant as I am very
> new to asterisk.
>
> Right now I have two pc's connected back to back through an E100 card
> running asterisk.  I have openh323 running as well and I am able to route
> calls through the E1 line.  Next up I would like to be able to register
> asterisk with a gatekeeper.  On another computer is running openGK.  Using
> the gatekeeper I am able to register my h323 client with a phone number,
it
> all seems to be working.
>
> When I put the ip address of the gatekeeper into h323.conf, asterisk
failed
> to load.  I get an error that I can't open an h323 listener on port 1720.
>
> Has anyone done this before?  Your help would be appreciated.
>
> Regards,
>
> Sean Langley, P.Eng
> Firmware Engineer
> General Dynamics Canada
> (403)730-1482
> sean.langley at gdcanada.com
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>