[Asterisk-Users] Turning off Bridging?

[Darren Smith]

Hi folks

Is it possible to turn off the native bridging on Asterisk?

I've been hacking about app_disa.c to support account & pin numbers, that tag the calls
depending on who logs in.....

It all works fine, then dials the destination number they requested.

My setup is as follows

[ENDPOINT]       <IAX1>     [MYASTERISKBOX]    < IAX1 >    [TELCOBOX]<>(PSTN)

If i dial [MYASTERISKBOX] via IAX1 from an <ENDPOINT> and call a pstn number, the call
connects via [MYASTERISKBOX] but then gets transferred directly to TELCOBOX and I loose
call duration etc :-(

Logs from MYASTERISKBOX show the following:

    -- Executing Dial("IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55",
"IAX/<MYUSER>:<MYPASS>@<TELCOBOXIP>/<DESTNUMBER>@<MYCONTEXT>") in new stack
    -- Calling using options
'exten=<DSTNO>;callerid=<SRCNO>;language=en;context=<MYCONTEXT>;username=<MYUSER>;formats=
2;capability=2;version=1;adsicpe=0'
    -- Called <MYUSER>:<MYPASS>@<TELCOBOXIP>/<DSTNO>@<MYCONTEXT>
    -- Call accepted by <TELCOBOXIP> (format 2)
    -- Format for call is 2
    -- IAX[<TELCOBOX>]/57 is ringing
    -- IAX[<TELCOBOX>]/57 stopped sounds
    -- IAX[<TELCOBOX>]/57 answered IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55
    -- Attempting native bridge of IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55 and
IAX[<TELCOBOX>]/57
    -- Channel 'IAX[<TELCOBOX>]/57' ready to transfer
    -- Channel 'IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55' ready to transfer
    -- Releasing IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55 and IAX[<TELCOBOX>]/57
    ........
    -- Hungup 'IAX[<TELCOBOX>]/57'

The total call duration was about 42 seconds, yet the actual call was ~ 16 minutes.

The Telcobox has a Digium E1 card in :)

Any thoughts?

Regards

Darren Smith
Game Digital Ltd