[Asterisk-Users] How to make an X100P answer only one distinctive ring cadence?

[Wade Weppler]

Another option is Aastra's Ring Selectors.  They can "split" a line into
multiple lines by ring cadence.

http://www.aastra.com/Products/RingSelectors/index.html

-wade


> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Tilghman Lesher
> Sent: Thursday, April 10, 2003 11:43 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] How to make an X100P answer only one
> distinctive ring cadence?
> 
> On Wednesday 09 April 2003 08:48 pm, Jim Archer wrote:
> > Hi All...
> >
> > Is it possible to cause asterisk to answer some distinctive ring
> > patterns but not others? I have a POTS line plugged into an X100P
> > and I would like * to ignore one ring cadence that is answered by a
> > fax machine.  How would I do that?
> 
> I don't think there's any way currently to do that, as such.  However,
> an X100P shouldn't pick up a line which is already picked up, so if
> your fax machine can detect the ringing, then simply allow the phone
> to ring longer (a longer initial Wait) and have the fax machine pick
> up immediately.
> 
> Alternatively, you could get an FXS card from Digium and set up a
> 'fax' extension, such that when a fax is detected from within
> Asterisk, it passes the call through to the FXS port connected to the
> fax machine.
> 
> -Tilghman
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users