; Abasto3
; DAHDI telephony
;
; Configuration file
;
; You need to restart Asterisk to re-configure the DAHDI channel
; CLI> reload chan_dahdi.so 
;		will reload the configuration file,
;		but not all configuration options are 
; 		re-configured during a reload (signalling, as well as
;               PRI and SS7-related settings cannot be changed on a
;               reload.
; 
; This file documents many configuration variables.  Normally unless you
; know what a variable means or that it should be changed, there's no
; reason to unrem lines.
;
; remmed-out examples below (those lines that begin with a ';' but no
; space afterwards) typically show a value that is not the defauult value,
; but would make sense under cetain circumstances. The default values
; are usually sane. Thus you should typically not touch them unless you 
; know what they mean or you know you should change them.

[channels]
usecallingpres=yes
;callwaiting=yes
echocancel = yes
echocancelwhenbridged = yes
echotraining=no
rxgain = 0.0
txgain = 0.0

signalling = mfcr2
mfcr2_variant = ar
mfcr2_get_ani_first=yes ;probé en no pero no funcionó
mfcr2_max_ani = 11
mfcr2_max_dnis = 20
mfcr2_category = national_subscriber
mfcr2_logdir=span1
;mfcr2_call_files=yes ;lo configuro desde la consola cli
mfcr2_loglevel=error,warning,debug,notice,cas,mf ;lo puedo configuro desde la consola cli
;mfcr2_logging=all
;mfcr2_immediate=no
;immediate=no
;mfcr2_mfback_timeout=500
mfcr2_mfback_timeout=2000 # modifiqué para abasto
mfcr2_allow_collect_calls=no
mfcr2_double_answer=no
mfcr2_immediate_accept=no
mfcr2_skip_category=no
;mfcr2_advanced_protocol_file = /etc/asterisk/r2proto.conf
mfcr2_forced_release=yes ;
;mfcr2_forced_release=no; 
mfcr2_charge_calls=yes

group=1
context=tramas
channel => 1-15

group=2
context=tramas
channel => 42-46
channel => 48-62
channel=>79-93
channel=>104-108
channel=>110-124

;entrantes
group=3
context=tramas
channel => 17-31
channel => 32-41
channel=>63-77
channel=>94-103