<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:12pt"><div><span>Hi <br></span></div><div><span>Excuse me could you help me with the problem to receive and make calls with a r2, where the all is ok and not show information of the card when run the wanpipemon.</span></div><div><br><span></span></div><div><span>DELL poweregde 310<br><br>System.conf<br>#Sangoma A101 port 1 [slot:4 bus:6 span:1]
<wanpipe1><br>span=1,1,0,cas,hdb3<br>cas=1-15:1101<br>hardhdlc=16<br>cas=17-31:1101<br><br>loadzone=us<br>defaultzone=us<br><br><br>Chan_dahdi.conf<br>[trunkgroups]<br><br>[channels]<br><br>signalling=mfcr2<br>mfcr2_variant=mx<br>mfcr2_get_ani_first=no<br>mfcr2_max_ani=10<br>mfcr2_max_dnis=4<br>mfcr2_category=national_subscriber<br>mfcr2_mfback_timeout=-1<br>mfcr2_metering_pulse_timeout=-1<br>mfcr2_logdir=log<br>mfcr2_logging=all<br>context=from-pstn<br><br>group=1<br>;echocancel=yes<br>faxdetect=incoming<br>restrictcid=yes<br>hidecallerid=no<br>channel => 1-15<br>channel => 17-31<br><br>Wanpipe1.conf<br>[interfaces]<br>w1g1 = wanpipe1, , TDM_VOICE, Comment<br><br>[wanpipe1]<br>CARD_TYPE = AFT<br>S514CPU = A<br>CommPort = PRI<br>AUTO_PCISLOT =
NO<br>PCISLOT = 4<br>PCIBUS = 6<br>FE_MEDIA = E1<br>FE_LCODE = HDB3<br>FE_FRAME = NCRC4<br>FE_LINE = 1<br>TE_CLOCK = NORMAL<br>TE_REF_CLOCK = 0<br>TE_SIG_MODE = CAS<br>TE_HIGHIMPEDANCE = NO<br>TE_RX_SLEVEL = 430<br>LBO = 120OH<br>FE_TXTRISTATE = NO<br>MTU = 1500<br>UDPPORT =
9000<br>TTL = 255<br>IGNORE_FRONT_END = NO<br>TDMV_SPAN = 1<br>TDMV_DCHAN = 16<br>TE_AIS_MAINTENANCE = NO #NO: defualt YES: Start port in AIS Blue Alarm and keep line down<br> #wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance
mode<br> #wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode<br>TDMV_HW_DTMF = YES # YES: receive dtmf events from hardware<br>TDMV_HW_FAX_DETECT = YES # YES: receive fax 1100hz events from hardware<br>HWEC_OPERATION_MODE = OCT_NORMAL # OCT_NORMAL: echo cancelation
enabled with nlp (default)<br><br># OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)<br><br># OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.<br>HWEC_DTMF_REMOVAL = NO # NO: default YES: remove dtmf out of incoming media (must have hwdtmf enabled)<br>HWEC_NOISE_REDUCTION = NO # NO: default YES: reduces noise on the line - could break fax<br>HWEC_ACUSTIC_ECHO = NO # NO: default YES: enables acustic echo cancelation<br>HWEC_NLP_DISABLE = NO # NO: default YES: guarantees software tone detection (possible echo)<br>HWEC_TX_AUTO_GAIN = 0 # 0: disable -40-0: default tx audio level to be maintained (-20
default)<br><br>Wanrouter hwprobe<br>-------------------------------<br>| Wanpipe Hardware Probe Info |<br>-------------------------------<br>1 . AFT-A101-SH : SLOT=4 : BUS=6 : IRQ=15 : CPU=A : PORT=1 : HWEC=32 : V=37<br><br>Card Cnt: A101-2=1<br><br>Cat /proc/interrups<br>[root@SRVCALL2 ~]# cat /proc/interrupts<br> CPU0 CPU1 CPU2 CPU3<br> 0: 245 0 0 1067168 IO-APIC-edge timer<br> 8: 0 0
3 0 IO-APIC-edge rtc<br> 9: 0 0 0 0 IO-APIC-level acpi<br> 58: 14582 0 0 0 PCI-MSI-X eth0-0<br> 66: 4158 0 0 0 PCI-MSI-X
eth0-1<br> 74: 6797 0 0 0 PCI-MSI-X eth0-2<br> 82: 3600 0 0 0 PCI-MSI-X eth0-3<br> 90: 2448 0 0 0 PCI-MSI-X eth0-4<br> 98:
1 0 0 0 PCI-MSI-X cnic<br>169: 0 0 1025706 0 IO-APIC-level wanpipe1<br>217: 0 173 0 0 IO-APIC-level ehci_hcd:usb1, ehci_hcd:usb2<br>225: 0
0 9181 0 IO-APIC-level ata_piix<br>233: 0 0 11044 0 IO-APIC-level ata_piix<br>NMI: 0 0 0 0<br>LOC: 1067151 1067170 1067167 1067169<br>ERR: 0<br>MIS: 0<br><br><br>Wanrouter Status<br>Devices currently active:<br>
wanpipe1<br><br><br>Wanpipe Config:<br><br>Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |<br>wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 169 | 4 | 1 | N/A | 0 |<br><br>Wanrouter Status:<br><br>Device name | Protocol | Station | Status |<br>wanpipe1 | AFT TE1 | N/A | Connected |<br></span></div><div><br>Atte<br> <br></div><div><br><font style="background-color: rgb(255, 223, 191);"> </font><i><strong><font style="background-color: rgb(0, 0, 255);"><font style="background-color: rgb(255, 223, 191);">William A. Cardona</font></font><font style="background-color: rgb(255, 191, 223);"> </font></strong></i></div><div
align="center"><i><font color="#0000bf"><strong>"Todo lo Puedo en Cristo que me Fortalece"</strong></font></i></div><div><i><font color="#0000bf"><strong>Honduras, CentralAmerica</strong></font></i></div><div><i><font color="#0000bf"><strong> 504 9834 9127</strong></font></i></div><div> </div></div></body></html>