<html><body><div style="color:#000; background-color:#fff; font-family:times new roman, new york, times, serif;font-size:12pt"><div><span>Hi <br></span></div><div><span>Excuse me could you help me with the problem to receive and make calls with a r2, where the all is ok and not show information of the card when run the wanpipemon.</span></div><div><br><span></span></div><div><span>DELL poweregde 310<br><br>System.conf<br>#Sangoma A101 port 1 [slot:4 bus:6 span:1]
 <wanpipe1><br>span=1,1,0,cas,hdb3<br>cas=1-15:1101<br>hardhdlc=16<br>cas=17-31:1101<br><br>loadzone=us<br>defaultzone=us<br><br><br>Chan_dahdi.conf<br>[trunkgroups]<br><br>[channels]<br><br>signalling=mfcr2<br>mfcr2_variant=mx<br>mfcr2_get_ani_first=no<br>mfcr2_max_ani=10<br>mfcr2_max_dnis=4<br>mfcr2_category=national_subscriber<br>mfcr2_mfback_timeout=-1<br>mfcr2_metering_pulse_timeout=-1<br>mfcr2_logdir=log<br>mfcr2_logging=all<br>context=from-pstn<br><br>group=1<br>;echocancel=yes<br>faxdetect=incoming<br>restrictcid=yes<br>hidecallerid=no<br>channel => 1-15<br>channel => 17-31<br><br>Wanpipe1.conf<br>[interfaces]<br>w1g1 = wanpipe1, , TDM_VOICE, Comment<br><br>[wanpipe1]<br>CARD_TYPE       = AFT<br>S514CPU         = A<br>CommPort        = PRI<br>AUTO_PCISLOT    =
 NO<br>PCISLOT         = 4<br>PCIBUS          = 6<br>FE_MEDIA        = E1<br>FE_LCODE        = HDB3<br>FE_FRAME        = NCRC4<br>FE_LINE         = 1<br>TE_CLOCK        = NORMAL<br>TE_REF_CLOCK    = 0<br>TE_SIG_MODE     = CAS<br>TE_HIGHIMPEDANCE        = NO<br>TE_RX_SLEVEL    = 430<br>LBO             = 120OH<br>FE_TXTRISTATE   = NO<br>MTU             = 1500<br>UDPPORT         =
 9000<br>TTL             = 255<br>IGNORE_FRONT_END        = NO<br>TDMV_SPAN               = 1<br>TDMV_DCHAN              = 16<br>TE_AIS_MAINTENANCE = NO         #NO: defualt  YES: Start port in AIS Blue Alarm and keep line down<br>                                #wanpipemon -i w1g1 -c Ttx_ais_off to disable AIS maintenance
 mode<br>                                                                #wanpipemon -i w1g1 -c Ttx_ais_on to enable AIS maintenance mode<br>TDMV_HW_DTMF            = YES           # YES: receive dtmf events from hardware<br>TDMV_HW_FAX_DETECT              = YES           # YES: receive fax 1100hz events from hardware<br>HWEC_OPERATION_MODE     = OCT_NORMAL    # OCT_NORMAL: echo cancelation
 enabled with nlp (default)<br><br># OCT_SPEECH: improves software tone detection by disabling NLP (echo possible)<br><br># OCT_NO_ECHO:disables echo cancelation but allows VQE/tone functions.<br>HWEC_DTMF_REMOVAL       = NO    # NO: default  YES: remove dtmf out of incoming media (must have hwdtmf enabled)<br>HWEC_NOISE_REDUCTION    = NO    # NO: default  YES: reduces noise on the line - could break fax<br>HWEC_ACUSTIC_ECHO       = NO    # NO: default  YES: enables acustic echo cancelation<br>HWEC_NLP_DISABLE        = NO    # NO: default  YES: guarantees software tone detection (possible echo)<br>HWEC_TX_AUTO_GAIN       = 0     # 0: disable   -40-0: default tx audio level to be maintained (-20
 default)<br><br>Wanrouter hwprobe<br>-------------------------------<br>| Wanpipe Hardware Probe Info |<br>-------------------------------<br>1 . AFT-A101-SH : SLOT=4 : BUS=6 : IRQ=15 : CPU=A : PORT=1 : HWEC=32 : V=37<br><br>Card Cnt: A101-2=1<br><br>Cat /proc/interrups<br>[root@SRVCALL2 ~]# cat /proc/interrupts<br>           CPU0       CPU1       CPU2       CPU3<br>  0:        245          0          0    1067168    IO-APIC-edge  timer<br>  8:          0          0         
 3          0    IO-APIC-edge  rtc<br>  9:          0          0          0          0   IO-APIC-level  acpi<br> 58:      14582          0          0          0       PCI-MSI-X  eth0-0<br> 66:       4158          0          0          0       PCI-MSI-X 
 eth0-1<br> 74:       6797          0          0          0       PCI-MSI-X  eth0-2<br> 82:       3600          0          0          0       PCI-MSI-X  eth0-3<br> 90:       2448          0          0          0       PCI-MSI-X  eth0-4<br> 98:         
 1          0          0          0       PCI-MSI-X  cnic<br>169:          0          0    1025706          0   IO-APIC-level  wanpipe1<br>217:          0        173          0          0   IO-APIC-level  ehci_hcd:usb1,             ehci_hcd:usb2<br>225:          0         
 0       9181          0   IO-APIC-level  ata_piix<br>233:          0          0      11044          0   IO-APIC-level  ata_piix<br>NMI:          0          0          0          0<br>LOC:    1067151    1067170    1067167    1067169<br>ERR:          0<br>MIS:          0<br><br><br>Wanrouter Status<br>Devices currently active:<br>       
 wanpipe1<br><br><br>Wanpipe Config:<br><br>Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud rate |<br>wanpipe1    | N/A          | A101/1D/A102/2D/4/4D/8| 169 | 4       | 1    | N/A | 0         |<br><br>Wanrouter Status:<br><br>Device name | Protocol | Station | Status        |<br>wanpipe1    | AFT TE1  | N/A     | Connected     |<br></span></div><div><br>Atte<br> <br></div><div><br><font style="background-color: rgb(255, 223, 191);">   </font><i><strong><font style="background-color: rgb(0, 0, 255);"><font style="background-color: rgb(255, 223, 191);">William A. Cardona</font></font><font style="background-color: rgb(255, 191, 223);"> </font></strong></i></div><div
 align="center"><i><font color="#0000bf"><strong>"Todo lo Puedo en Cristo que me Fortalece"</strong></font></i></div><div><i><font color="#0000bf"><strong>Honduras, CentralAmerica</strong></font></i></div><div><i><font color="#0000bf"><strong>       504 9834 9127</strong></font></i></div><div> </div></div></body></html>