Thanks again Ricardo,<div><br></div><div>When I dial a code to take the E1 from PBX they PBX connect me to a Channel of the E1(give me tone) , in a round robin method, start with 62, the next call 61... to 32 . </div><div>
So I ´ll talk with the Nortel Technical sopport in order to do that ( to take and speficic channel 48-62 or 32- 47)</div><div>The other way I ´m thinking its to change mfcr2_max_dnis=1, and then colect in asterisk the number that the users whants to dial ( it´s no a clean way, but probably works).</div>
<div><br></div><div>So, the only way to said sendme the number that you have to asterisk it´s from the PBX side??</div><div><br></div><div>Thanks one more.<br><br><div class="gmail_quote">2012/2/25 Mc GRATH Ricardo <span dir="ltr"><<a href="mailto:mcgrathr@mail2web.com" target="_blank">mcgrathr@mail2web.com</a>></span><br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<div style="direction:ltr;font-size:x-small;font-family:Tahoma">
<div>Carlos</div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma">When from PBX (Nortel) you dial an xx number on Asterisk<a></a> it's always through channel 57.</font></div>
<div><font face="tahoma">Well it need to change on Nortel when it perform<a></a> a call to Asterisk according dial number to be router to channel where it can process call ac cording to digit number length.</font></div>
<div><font face="tahoma">So according to my suggestion the first 15 channels (32 to 46) will process<a></a> call where PBX Nortel will send digit length of 4 digits, and the channels 48 to 62 will process call of 7 digits.</font></div>
<div><font face="tahoma">By the way to dial digits that you send after some timeout (Nortel<a></a> to Asterisk), it could be possible but it's depend of the PBX (Nortel) and configured onto system.</font></div>
<div><font face="tahoma">Try to when make a call if a possibility<a></a> on Nortel to choose channel by someway possible by a code or key on extension so in these way you can test manually.</font></div><div>
<div><font face="tahoma">Best regards</font></div>
<div> </div>
<div>
<div><font face="Tahoma">Mc GRATH<a></a><a></a> Ricardo</font></div>
<div><font face="tahoma">E-Mail<a></a><a></a> <a href="mailto:mcgrathr@mail2web.com" target="_blank">
mcgrathr@mail2web.com</a><a></a><a></a></font></div>
</div>
<div dir="ltr"><font color="#000000" face="Tahoma"></font> </div>
</div><div style="DIRECTION:ltr">
<hr>
<font color="#000000" face="Tahoma"><div><b>From:</b> <a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a> [<a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a>] On Behalf Of Carlos Rodriguez Alcala [<a href="mailto:carlos.rav@gmail.com" target="_blank">carlos.rav@gmail.com</a>]<br>
</div><b>Sent:</b> 25 February 2012 18:24<div><div><br>
<b>To:</b> <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>
<b>Subject:</b> Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO<br>
</div></div></font><br>
</div><div><div>
<div></div>
<div>
<div>Thanks Ricardo,</div>
<div>I try the configuration that you sugest me. but I have this problem:</div>
<div><br>
</div>
<div> The thing is than I can´t choose the channel I use, for example when I call through PBX, I dial de code to take the E1, and The PBX give for example one channel and tone ( appear on asterisk </div>
<div>"New MFC/R2 call detected on chan 57.</div>
<div>localhost*CLI>" but change on every call the chan XX) and the I have to Dial the number of 3 , 6 or 7 digits)</div>
<div><br>
</div>
<div>So, there´s no way to say to E1 dialthe digits that I send you after some timeout parameter ???</div>
<br>
<div class="gmail_quote">2012/2/23 Mc GRATH Ricardo <span dir="ltr"><<a href="mailto:mcgrathr@mail2web.com" target="_blank">mcgrathr@mail2web.com</a>></span><br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div>
<div style="FONT-FAMILY:Tahoma;DIRECTION:ltr;FONT-SIZE:x-small">
<div>Carlos </div>
<div>Good sounds, great! congratulations!</div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma">Well MFCR2<a></a><a></a> have these kind of issues and it look limited, and becomes from compelled digit length number, well at these stage I couldn't said exactly how to resolve, but I have an idea.</font></div>
<div><font face="tahoma">Basically I think to divide <a></a> E1<a></a><a></a> trunk channels on both side in order to send different<a></a> digit length number, in case of Asterisk on dahdi-channels.conf<a></a><a></a> you can set channels it could be see bottom<a></a>
of configuration so it could be on the same span 2 context applied to different<a></a> channel and digit length.</font></div>
<div><font face="tahoma">In the other side should have to do call routing table to redirect digit length to the right channels otherwise, could happens incorrect disconnection causes.</font></div>
<div><font face="tahoma">If these it work it have a limitation of quantity call routes, but if work you can adjust according to traffic measurement<a></a> and analysis.</font></div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma">Configuration for less quantity<a></a> digits numbers</font></div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma">
<div>
<div>; Span 2: TE2<a></a><a></a>/0/2 "T2XXP<a></a><a></a> (PCI) Card 0 Span 2"</div>
</div>
<div>
<div>
<div style="COLOR:rgb(80,0,80)">
<div><a></a><a></a>mfcr2_skip_category=yes</div>
<div>group=2</div>
<div>;switchtype<a></a><a></a> = euroisdn<a></a><a></a></div>
<div>signalling =mfcr2<a></a><a></a></div>
<div><a></a><a></a>mfcr2_variant=itu<a></a><a></a></div>
</div>
<div><a></a>mfcr2_get_ani_first=yes</div>
</div>
<div style="COLOR:rgb(80,0,80)">
<div><a></a><a></a>mfcr2_max_ani=4</div>
<div><font size="4"><font color="#800000"><u><a></a><font size="4"><font color="#800000"><u><a></a></u></font></font><font size="4"><font color="#800000"><u><font size="4"><font color="#800000"><u>mfcr2_max_dnis</u></font></font></u></font></font>=</u></font><font color="#ff0000">4</font></font></div>
<div>
<div><a></a><a></a>callerid=asreceived<a></a><a></a></div>
<div><a></a><a></a>mfcr2_category=national_priority_subscribe<a></a><a></a></div>
<div><a></a><a></a>mfcr2_logdir=span1<a></a><a></a></div>
<div><a></a><a></a>mfcr2_call_files=yes</div>
<div><a></a><a></a>mfcr2_logging=all</div>
<div><a></a><a></a>mfcr2_mfback_timeout=-1</div>
<div><a></a><a></a>mfcr2_metering_pulse_timeout=-1</div>
<div><a></a><a></a>mfcr2_allow_collect_calls=no</div>
<div><a></a><a></a>mfcr2_double_answer=no</div>
<div><a></a><a></a>mfcr2_forced_release=no</div>
<div><a></a><a></a>mfcr2_charge_calls=yes</div>
<div><a></a><a></a>mfcr2_skip_category=no</div>
<div><a></a><a></a>callerid=asreceived<a></a><a></a></div>
<div>context=salida<a></a><a></a></div>
<div><font size="4"><font color="#800000"><u>channel => </u></font><font color="#ff0000">32-46</font></font></div>
<div><font color="#ff0000" size="4" face="tahoma"></font> </div>
</div>
<div><font color="#000000" face="tahoma">Configuration for 7 digits number length</font></div>
<div> </div>
<div>
<div>
<div>; Span 2: TE2<a></a><a></a>/0/2 "T2XXP<a></a><a></a> (PCI) Card 0 Span 2"</div>
</div>
<div>
<div>
<div style="COLOR:rgb(80,0,80)">
<div><a></a><a></a>mfcr2_skip_category=yes</div>
<div>group=2</div>
<div>;switchtype<a></a><a></a> = euroisdn<a></a><a></a></div>
<div>signalling =mfcr2<a></a><a></a></div>
<div><a></a><a></a>mfcr2_variant=itu<a></a><a></a></div>
</div>
<div><a></a>mfcr2_get_ani_first=yes</div>
</div>
<div style="COLOR:rgb(80,0,80)">
<div>
<div><a></a><a></a>mfcr2_max_ani=4</div>
<div><u><font color="#800000" size="4"><a></a><u><font color="#800000" size="4"><a></a></font></u><u><font color="#800000" size="4"><u><font color="#800000" size="4">mfcr2_max_dnis</font></u></font></u>=</font></u>7</div>
<div><a></a><a></a>callerid=asreceived<a></a><a></a></div>
<div><a></a><a></a>mfcr2_category=national_priority_subscribe<a></a><a></a></div>
<div><a></a><a></a>mfcr2_logdir=span1<a></a><a></a></div>
<div><a></a><a></a>mfcr2_call_files=yes</div>
<div><a></a><a></a>mfcr2_logging=all</div>
<div><a></a><a></a>mfcr2_mfback_timeout=-1</div>
<div><a></a><a></a>mfcr2_metering_pulse_timeout=-1</div>
<div><a></a><a></a>mfcr2_allow_collect_calls=no</div>
<div><a></a><a></a>mfcr2_double_answer=no</div>
<div><a></a><a></a>mfcr2_forced_release=no</div>
<div><a></a><a></a>mfcr2_charge_calls=yes</div>
<div><a></a><a></a>mfcr2_skip_category=no</div>
<div><a></a><a></a>callerid=asreceived<a></a><a></a></div>
<div>context=salida<a></a><a></a></div>
</div>
<div><font size="4"><font color="#800000"><u>channel => </u></font><font color="#ff0000">48-62</font></font></div>
<div><font color="#ff0000" size="4" face="tahoma"></font> </div>
<div><font color="#ff0000" size="4" face="tahoma">Please check dialplan<a></a><a></a> if you have assign context<a></a> (DAHDI<a></a><a></a>/g/${EXTEN<a></a><a></a>})</font></div>
</div>
</div>
</div>
</div>
</div>
</font></div>
<div>
<div>
<div><font face="Tahoma"></font> </div>
<div><font face="Tahoma">Best regards</font></div>
<div><font face="Tahoma">Mc GRATH<a></a><a></a> Ricardo</font></div>
<div><font face="tahoma">E-Mail<a></a><a></a> <a href="mailto:mcgrathr@mail2web.com" target="_blank">
mcgrathr@mail2web.com</a><a></a><a></a></font></div>
</div>
<div dir="ltr"><font color="#000000" face="Tahoma"></font> </div>
</div>
<div style="DIRECTION:ltr">
<hr>
<font color="#000000" face="Tahoma">
<div><b>From:</b> <a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">
asterisk-r2-bounces@lists.digium.com</a> [<a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a>] On Behalf Of Carlos Rodriguez Alcala [<a href="mailto:carlos.rav@gmail.com" target="_blank">carlos.rav@gmail.com</a>]<br>
</div>
<b>Sent:</b> 23 February 2012 22:20
<div>
<div><br>
<b>To:</b> <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>
<b>Subject:</b> Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO<br>
</div>
</div>
</font><br>
</div>
<div>
<div>
<div></div>
<div><span>Hi Ricardo,</span>
<div><br>
</div>
<div>It works!! thanks.</div>
<div><br>
</div>
<div>I still have a problem... I have to call to numbers with 6 or 7 digits(sometimes 3 numbers), but if I put 6 on mfcr2_max_dnis it only allow me to dial 6 digits and then send the call. </div>
<div>If I put 7 digits(on mfcr2_max_dnis=7) I only can call to numbers 7 digits, if I call 6 digits (with mfcr2_max_dnis=7) sound me like busy after few seconds. </div>
<div>This is the configuration of de E1 (side pbx) and then the log of a sucefull call(7 digits, on chanel 46) and a fail log (6 digits, on channel 45).</div>
<div><br>
</div>
<div>In the debug it like always expect "<span style="LINE-HEIGHT:21px;FONT-FAMILY:Consolas,Menlo,Monaco,'Lucida Console','Liberation Mono','DejaVu Sans Mono','Bitstream Vera Sans Mono',monospace,serif;FONT-SIZE:12px">expected length: 7" no less than that!!</span></div>
<div>How can I do?</div>
<div>
<div><br>
</div>
<div>; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"</div>
</div>
<div>
<div style="COLOR:rgb(80,0,80)">
<div>mfcr2_skip_category=yes</div>
<div>group=2</div>
<div>;switchtype = euroisdn</div>
<div>signalling =mfcr2</div>
<div>mfcr2_variant=itu</div>
</div>
<div>mfcr2_get_ani_first=yes</div>
<div style="COLOR:rgb(80,0,80)">
<div>mfcr2_max_ani=4</div>
<div>mfcr2_max_dnis=7</div>
<div>callerid=asreceived</div>
<div>mfcr2_category=national_priority_subscribe</div>
<div>mfcr2_logdir=span1</div>
<div>mfcr2_call_files=yes</div>
<div>mfcr2_logging=all</div>
<div>mfcr2_mfback_timeout=-1</div>
<div>mfcr2_metering_pulse_timeout=-1</div>
<div>mfcr2_allow_collect_calls=no</div>
<div>mfcr2_double_answer=no</div>
<div>mfcr2_forced_release=no</div>
<div>mfcr2_charge_calls=yes</div>
<div>mfcr2_skip_category=no</div>
<div>callerid=asreceived</div>
<div>context=salida</div>
<div>channel => 32-46,48-62</div>
</div>
</div>
<div>#################################################</div>
<div>channel 46</div>
<div><br>
</div>
<div><a href="http://pastebin.com/iASqWrSP" target="_blank">http://pastebin.com/iASqWrSP</a>
</div>
<div>#############</div>
<div><br>
</div>
<div>channel 45</div>
<div><a href="http://pastebin.com/gLV38UbT" target="_blank">http://pastebin.com/gLV38UbT</a>
</div>
<div><br>
</div>
<div class="gmail_quote">2012/2/22 Mc GRATH Ricardo <span dir="ltr"><<a href="mailto:mcgrathr@mail2web.com" target="_blank">mcgrathr@mail2web.com</a>></span><br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div>
<div style="FONT-FAMILY:Tahoma;DIRECTION:ltr;FONT-SIZE:x-small">
<div>Carlos</div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma">I probably sure problem it becomes from the rule setting on dialplan<a></a><a></a><a></a> that you have assign, just in case of your settings of "<font color="#ff0000"> <font size="6">.,</font></font>" is not a good setting it mean
Asterisk can dial one or more digits, by the way it can causes great potential to cause problems, these last is not from me.</font></div>
<div><font face="tahoma">So I have an idea to test dialplan<a></a><a></a> if working properly<a></a><a></a>.</font></div>
<div><font face="tahoma">Could assign context [salida<a></a><a></a>]<a></a> to one Asterisk SIP device and use for test of dialplan<a></a><a></a><a></a> rules?</font></div>
<div><font face="tahoma">By the other way I change salida<a></a><a></a><a></a> rules to the following, it should work.</font></div>
<div>
<div>[salida<a></a><a></a><a></a>]</div>
<div><a></a><a></a><a></a>exten => _x.,1,Progress<a></a><a></a><a></a>()</div>
<div><a></a><a></a><a></a>exten => _X.,n,Dial<a></a><a></a><a></a>(DAHDI<a></a><a></a><a></a>/g1<a></a><a></a><a></a>/${EXTEN<a></a><a></a><a></a>})</div>
</div>
<div>
<div><font face="Tahoma"></font> </div>
<div><font face="Tahoma"><font face="tahoma">Try it and let me know the test result
</font></font></div>
<div>
<div><font face="Tahoma"></font> </div>
<div><font face="Tahoma">Mc GRATH<a></a><a></a><a></a> Ricardo</font></div>
<div><font face="tahoma">E-Mail<a></a><a></a><a></a> <a href="mailto:mcgrathr@mail2web.com" target="_blank">
mcgrathr@mail2web.com</a><a></a><a></a><a></a></font></div>
</div>
</div>
<div dir="ltr"><font color="#000000" face="Tahoma"></font> </div>
<div style="DIRECTION:ltr">
<hr>
<font color="#000000" face="Tahoma">
<div><b>From:</b> <a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a> [<a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a>] On Behalf Of Carlos Rodriguez Alcala [<a href="mailto:carlos.rav@gmail.com" target="_blank">carlos.rav@gmail.com</a>]<br>
</div>
<b>Sent:</b> 22 February 2012 11:50
<div>
<div><br>
<b>To:</b> <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>
<b>Subject:</b> Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO<br>
</div>
</div>
</font><br>
</div>
<div>
<div>
<div></div>
<div>Ok I will set asterisk -vvvr !! :D
<div>For now there´s no way, I´ll ask for PBX tech, But If I connect directly TELCO-PBX works well. <br>
<br>
<div class="gmail_quote">2012/2/22 Mc GRATH Ricardo <span dir="ltr"><<a href="mailto:mcgrathr@mail2web.com" target="_blank">mcgrathr@mail2web.com</a>></span><br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div>
<div style="FONT-FAMILY:Tahoma;DIRECTION:ltr;FONT-SIZE:x-small">
<div>Thanks</div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma">Well how about to set core set verbose 3 to see what's<a></a> going on when call is performing?</font></div>
<div><font face="tahoma">No way to get a trace from Nortel?</font></div>
<div>
<div> </div>
<div>
<div><font face="Tahoma">Mc GRATH<a></a><a></a> Ricardo</font></div>
<div><font face="tahoma">E-Mail<a></a><a></a> <a href="mailto:mcgrathr@mail2web.com" target="_blank">
mcgrathr@mail2web.com</a><a></a><a></a></font></div>
</div>
<div dir="ltr"><font color="#000000" face="Tahoma"></font> </div>
</div>
<div style="DIRECTION:ltr">
<hr>
<font color="#000000" face="Tahoma"><b>From:</b> <a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">
asterisk-r2-bounces@lists.digium.com</a> [<a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a>] On Behalf Of Carlos Rodriguez Alcala [<a href="mailto:carlos.rav@gmail.com" target="_blank">carlos.rav@gmail.com</a>]<br>
<b>Sent:</b> 22 February 2012 11:08
<div>
<div><br>
<b>To:</b> <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>
<b>Subject:</b> Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO<br>
</div>
</div>
</font><br>
</div>
<div>
<div>
<div></div>
<div>Hi Ricardo,
<div><br>
</div>
<div><br>
</div>
<div>I have a digium card with 2 E1, I want to record the calls, so I have PBX ----E1 ----Elastix-----E1 ---- TELCO.</div>
<div>As you can see in my chan_dahdi.conf:</div>
<div>context= salida</div>
<div><br>
</div>
<div>and </div>
<div><br>
</div>
<div>extensions.conf </div>
<div><br>
</div>
<div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small">[salida]</div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small">exten => .,1,Answer</div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small">exten => .,2,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})</div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small">exten => .,3,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)</div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small">exten => .,n,Dial(DAHDI/g1/${EXTEN})</div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small">exten => h,1,Hangup</div>
</div>
<div style="FONT-FAMILY:Tahoma;FONT-SIZE:x-small"><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>
<div class="gmail_quote">2012/2/22 Mc GRATH Ricardo <span dir="ltr"><<a href="mailto:mcgrathr@mail2web.com" target="_blank">mcgrathr@mail2web.com</a>></span><br>
<blockquote style="BORDER-LEFT:#ccc 1px solid;MARGIN:0px 0px 0px 0.8ex;PADDING-LEFT:1ex" class="gmail_quote">
<div>
<div style="FONT-FAMILY:Tahoma;DIRECTION:ltr;FONT-SIZE:x-small">
<div>Hi</div>
<div><font face="tahoma"></font> </div>
<div><font face="tahoma"><a></a><font face="tahoma">What</font> kind of connection you have between PBX (nortel<a></a><a></a>) to Asterisk?</font></div>
<div><font face="tahoma">If a E1<a></a><a></a> could you get a trace from Nortel to Asterisk?</font></div>
<div><font face="tahoma">It probably you have to review your dialplan<a></a><a></a> for call rerouting from external device via Asterisk, it will help to get trace from external device from Asterisk to let you know the call disconnection<a></a> cause.</font></div>
<div><font face="tahoma">Best regards</font></div>
<div> </div>
<div>
<div><font face="Tahoma">Mc GRATH<a></a><a></a> Ricardo</font></div>
<div><font face="tahoma">E-Mail<a></a><a></a> <a href="mailto:mcgrathr@mail2web.com" target="_blank">
mcgrathr@mail2web.com</a><a></a><a></a></font></div>
</div>
<div dir="ltr"><font color="#000000" face="Tahoma"></font> </div>
<div style="DIRECTION:ltr">
<hr>
<font color="#000000" face="Tahoma"><b>From:</b> <a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">
asterisk-r2-bounces@lists.digium.com</a> [<a href="mailto:asterisk-r2-bounces@lists.digium.com" target="_blank">asterisk-r2-bounces@lists.digium.com</a>] On Behalf Of omar ivan perez vargas [<a href="mailto:o_i_p_v@hotmail.com" target="_blank">o_i_p_v@hotmail.com</a>]<br>
<b>Sent:</b> 22 February 2012 09:40<br>
<b>To:</b> <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>
<b>Subject:</b> Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO<br>
</font><br>
</div>
<div>
<div>
<div></div>
<div>
<div dir="ltr"><br>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
</div>
<br clear="all">
<div><br>
</div>
-- <br>
Atentamente,<br>
<br>
Carlos Rodríguez Alcalá Villagra<br>
<br>
</div>
</div>
</div>
</div>
</div>
<br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">
http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">
http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br>
</blockquote>
</div>
<br>
<br clear="all">
<div><br>
</div>
-- <br>
Atentamente,<br>
<br>
Carlos Rodríguez Alcalá Villagra<br>
<br>
</div>
</div></div></div>
</div>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br><br clear="all"><div><br></div>-- <br>Atentamente,<br>
<br>
Carlos Rodríguez Alcalá Villagra<br><br>
</div>