<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
<div><br></div><div><br></div>Hi, Everybody<div><br></div><div>Any update about it<br><div><div>1. The channels are swithching between "Zap alarm" and "Far en ublocked on chan.."</div><div>2. Protocol Error, INVALID CAS</div><div>3. Protocol Error... <span style="font-size: 10pt; "> Invalid Multi Frequency Tone</span></div><br class="Apple-interchange-newline"></div><div>Are someone with MFC-R2 experience?</div><div><br></div><div>Regards,</div><div>Diego Pinzon</div><div><br></div><div><br><br><div><div id="SkyDrivePlaceholder"></div><hr id="stopSpelling">Date: Fri, 20 Jan 2012 14:57:02 -0500<br>From: juanrcuervo@quality-telecom.net<br>To: diego_p_29@hotmail.com<br>CC: asterisk-r2@lists.digium.com<br>Subject: Re: [asterisk-r2] Incoming Calls hungup using MFCR2 Protocol<br><br>
<meta http-equiv="Content-Type" content="text/html; charset=unicode">
<meta name="Generator" content="Microsoft SafeHTML">
Hi Diego<br>
<br>
As I told you , I believe your problem is not related to the mfcr2
variant.<br>
This seems more like a timing, phisical or drivers problem to me.<br>
<br>
You use Sangoma and Wanpipe , and I have not experience in those.<br>
<br>
Can anyone check if this might be related to a hardware / drivers
issue?<br>
<br>
<br>
<br>
<pre class="ecxmoz-signature">Juan R. Cuervo Soto
Quality Telecom Ltd
<a class="ecxmoz-txt-link-abbreviated" href="http://www.quality-telecom.net" target="_blank">www.quality-telecom.net</a>
PBX : (575) 3693300
CEL : (57) 301-4174865</pre>
<br>
El 20/01/2012 11:46 a.m., Diego Pinzon escribió:
<blockquote cite="mid:SNT106-W29F8B30E454F73AB1738A2D4870@phx.gbl">
<style>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Tahoma;}
</style>
<div dir="ltr">
<div><br>
</div>
<div>Hi EveryBody, after teste "ar" variant the issue still
hungup incoming calls.</div>
<div><br>
</div>
<div><br>
</div>
<div>[Jan 20 11:23:14] WARNING[19197] app_dial.c: Unable to
forward voice frame</div>
<div>[Jan 20 11:26:24] ERROR[19140] chan_dahdi.c: Chan 33 -
Protocol error. Reason = Invalid CAS, R2 State = Clear Forward
Transmitted, MF state = MF Engine Off, MF Group = Forward
Group II, CAS = 0x04</div>
<div>DNIS = 5848484, ANI = 3175131107, MF = 0x20</div>
<div>[Jan 20 11:26:24] ERROR[19140] chan_dahdi.c: MFC/R2
protocol error on chan 33: Invalid CAS</div>
<div>[Jan 20 11:26:24] NOTICE[19140] chan_dahdi.c: Far end
unblocked on chan 33</div>
<div>[Jan 20 11:27:01] WARNING[19139] chan_dahdi.c: Chan 20 - MF
back cycle timed out!</div>
<div>[Jan 20 11:27:01] ERROR[19139] chan_dahdi.c: Chan 20 -
Protocol error. Reason = Multi Frequency Cycle Timeout, R2
State = Seize ACK Transmitted, MF state = ANI Request
Transmitted, MF Group = Backward Group A, CAS = 0x00</div>
<div>DNIS = 5, ANI = 31751311, MF = 0x31</div>
<div>[Jan 20 11:27:01] ERROR[19139] chan_dahdi.c: MFC/R2
protocol error on chan 20: Multi Frequency Cycle Timeout</div>
<div>[Jan 20 11:27:01] NOTICE[19139] chan_dahdi.c: Far end
unblocked on chan 20</div>
<div><br>
</div>
<div><br>
</div>
Regards,
<div>Diego Pinzon</div>
<div><br>
<div>
<hr id="ecxstopSpelling">Date: Fri, 20 Jan 2012 09:10:05 -0500<br>
From: <a class="ecxmoz-txt-link-abbreviated" href="mailto:juanrcuervo@quality-telecom.net">juanrcuervo@quality-telecom.net</a><br>
To: <a class="ecxmoz-txt-link-abbreviated" href="mailto:asterisk-r2@lists.digium.com">asterisk-r2@lists.digium.com</a><br>
CC: <a class="ecxmoz-txt-link-abbreviated" href="mailto:diego_p_29@hotmail.com">diego_p_29@hotmail.com</a>; <a class="ecxmoz-txt-link-abbreviated" href="mailto:eduardosolando85@gmail.com">eduardosolando85@gmail.com</a><br>
Subject: Re: [asterisk-r2] Incoming Calls hungup using MFCR2
Protocol<br>
<br>
Hi Diego<br>
<br>
I have been working for a while in Barranquilla with both
PSTN providers (telecom , Metrotel).<br>
You should try the Argentina variant of MFCR2. (AR), it
works fine for me.<br>
<br>
Anyway, I believe you have a problem apart from the
signalling variant. can you please post your system.conf
(dahdi) configuration file and your chan_dahdi.conf<br>
<br>
Regards,<br>
<br>
<pre class="ecxmoz-signature">Juan R. Cuervo Soto
Quality Telecom Ltd
<a class="ecxmoz-txt-link-abbreviated" href="http://www.quality-telecom.net" target="_blank">www.quality-telecom.net</a>
PBX : (575) 3693300
CEL : (57) 301-4174865</pre>
<br>
El 20/01/2012 07:17 a.m., Diego Pinzon escribió:
<blockquote cite="mid:SNT106-W2970C2CF86306C83B34CA8D4870@phx.gbl">
<style>
.ExternalClass .ecxhmmessage P
{padding:0px;}
.ExternalClass body.ecxhmmessage
{font-size:10pt;font-family:Tahoma;}
</style>
<div dir="ltr">
<div><br>
</div>
<div>Hi, EveryBody.</div>
<div><br>
</div>
<div>I have some problems with a MFCR2 Protocol and
Colombian TELCO. Some calls hungup or after answer the
operator and other calls reamin silent.</div>
<div><br>
</div>
<div>The main problems are:</div>
<div>1. The channels are swithching between "Zap alarm"
and "Far en ublocked on chan.."</div>
<div>2. Protocol Error, INVALID CAS</div>
<div>3. Protocol Error... <span style="font-size:10pt"> Invalid
Multi Frequency Tone</span></div>
<div><br>
</div>
<div>I need your help to fix it, I teste itu, ar, br
variants and the issue didnt fix. Please any advice
will be ready for testing</div>
<div><br>
</div>
<div><br>
</div>
<u>System Details:</u>
<div>A102 Sangoma <br>
<div>MFC.R2 Variant: CO</div>
<div>Asterisk-1.4.32</div>
<div>dahdi-linux-2.5.0.2</div>
<div>dahdi-tools-2.5.0.2</div>
<div>openr2-1.3.2</div>
<div>Openr2-asterisk-1.4.32-p1.patch</div>
<div>wanpipe-3.5.24<br class="ecxApple-interchange-newline">
<div><br>
</div>
<div>Diego Pinzon</div>
<div><br>
</div>
<div>Log:</div>
<div><br>
</div>
<div>
<div>Jan 19 23:46:23] NOTICE[8636] cdr.c: CDR
simple logging enabled.</div>
<div>[Jan 19 23:46:23] NOTICE[8636] loader.c: 146
modules will be loaded.</div>
<div>[Jan 19 23:46:23] WARNING[8636] res_smdi.c:
No SMDI interfaces are available to listen on,
not starting SMDI listener.</div>
<div>[Jan 19 23:46:23] ERROR[8636] codec_dahdi.c:
Failed to open /dev/dahdi/transcode: No such
file or directory</div>
<div>[Jan 19 23:46:23] NOTICE[8654] chan_dahdi.c:
Far end unblocked on chan 32</div>
<div>[Jan 19 23:46:23] NOTICE[8654] chan_dahdi.c:
Far end unblocked on chan 33</div>
<div>[Jan 19 23:46:23] NOTICE[8654] chan_dahdi.c:
Far end unblocked on chan 34</div>
</div>
<div>....</div>
<div><br>
</div>
<div>
<div>---------------------------------------------------------------------------------
RED ALARM .........................</div>
<div>[Jan 20 00:08:00] WARNING[8652] chan_dahdi.c:
Detected alarm on channel 1: Red Alarm</div>
<div>[Jan 20 00:08:00] WARNING[8652] chan_dahdi.c:
Zap alarm on chan 1.</div>
<div><span style="font-size:10pt">....</span></div>
</div>
<div>
<div>[Jan 20 00:08:00] WARNING[8653] chan_dahdi.c:
Zap alarm on chan 31.</div>
<div>[Jan 20 00:08:00] WARNING[8652] chan_dahdi.c:
Detected alarm on channel 5: Red Alarm</div>
</div>
<div><br>
</div>
<div>.....................................................................................................
PROTOCOL ERROR ........................</div>
<div><br>
</div>
<div>
<div>[Jan 20 00:28:10] NOTICE[8653] chan_dahdi.c:
Alarm cleared on channel 31</div>
<div>[Jan 20 00:28:10] WARNING[8653] chan_dahdi.c:
Zap alarm on chan 31.</div>
<div>[Jan 20 00:34:04] ERROR[8652] chan_dahdi.c:
Chan 1 - Protocol error. Reason = Invalid CAS,
R2 State = Idle, MF state = MF Engine Off, MF
Group = No Group, CAS = 0x04</div>
<div>DNIS = , ANI = , MF = 0x20</div>
<div>[Jan 20 00:34:04] ERROR[8652] chan_dahdi.c:
MFC/R2 protocol error on chan 1: Invalid CAS</div>
<div>[Jan 20 00:34:04] ERROR[8652] chan_dahdi.c:
Chan 2 - Protocol error. Reason = Invalid CAS,
R2 State = Idle, MF state = MF Engine Off, MF
Group = No Group, CAS = 0x04</div>
<div>DNIS = , ANI = , MF = 0x20</div>
<div>[Jan 20 00:34:04] ERROR[8652] chan_dahdi.c:
MFC/R2 protocol error on chan 2: Invalid CAS</div>
<div>[Jan 20 00:34:04] ERROR[8652] chan_dahdi.c:
Chan 3 - Protocol error. Reason = Invalid CAS,
R2 State = Idle, MF state = MF Engine Off, MF
Group = No Group, CAS = 0x04</div>
<div>DNIS = , ANI = , MF = 0x20</div>
<div>[Jan 20 00:34:04] ERROR[8652] chan_dahdi.c:
MFC/R2 protocol error on chan 3: Invalid CAS</div>
<div>[Jan 20 00:34:04] NOTICE[8652] chan_dahdi.c:
Far end blocked on chan 4</div>
</div>
<div><br>
</div>
<div>
<div>.....................................................................................................
PROTOCOL ERROR ........................</div>
</div>
<div><br>
</div>
<div>
<div><span style="font-size:10pt">[Jan 20
03:45:21] ERROR[11754] chan_dahdi.c: Chan 32 -
Protocol error. Reason = Invalid Multi
Frequency Tone, R2 State = Seize ACK Received,
MF state = Category Transmitted, MF Group =
Forward Group II, CAS = 0x0C</span></div>
<div>DNIS = 5848484, ANI = 55702714, MF = 0x33</div>
<div>[Jan 20 03:45:21] ERROR[11754] chan_dahdi.c:
MFC/R2 protocol error on chan 32: Invalid Multi
Frequency Tone</div>
<div>[Jan 20 03:45:21] WARNING[11754] app_dial.c:
Unable to forward voice or dtmf</div>
<div>[Jan 20 03:45:21] ERROR[11754] chan_dahdi.c:
Chan 32 - Trying to dial out in a non-idle
channel (cas=0x0C)</div>
<div>[Jan 20 03:45:21] ERROR[11754] chan_dahdi.c:
unable to make new MFC/R2 call!</div>
<div>[Jan 20 03:45:21] NOTICE[8654] chan_dahdi.c:
Far end unblocked on chan 32</div>
<div>[Jan 20 03:59:43] WARNING[8652] chan_dahdi.c:
Detected alarm on channel 1: Red Alarm</div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>......................................................................................................................................................................</div>
</div>
</div>
<div>chan_dahdi.conf</div>
<div><br>
</div>
<div>
<div><br>
</div>
<div>[channels]</div>
<div>context=default</div>
<div>usecallerid=yes</div>
<div>hidecallerid=no</div>
<div>callwaiting=yes</div>
<div>usecallingpres=yes</div>
<div>callwaitingcallerid=yes</div>
<div>threewaycalling=yes</div>
<div>transfer=yes</div>
<div>canpark=yes</div>
<div>cancallforward=yes</div>
<div>callreturn=yes</div>
<div>echocancel=no</div>
<div>echocancelwhenbridged=no</div>
<div>relaxdtmf=yes</div>
<div>rxgain=0.0</div>
<div>txgain=0.0</div>
<div>group=1</div>
<div>callgroup=1</div>
<div>pickupgroup=1</div>
<div>immediate=no</div>
<div>;Sangoma A102 port 1 [slot:10 bus:1 span:1]
<wanpipe1></div>
<div><br>
</div>
<div>signalling=mfcr2</div>
<div>mfcr2_variant=co</div>
<div>mfcr2_get_ani_first=yes</div>
<div><span style="font-size:10pt">mfcr2_max_ani=10</span></div>
<div>mfcr2_max_dnis=7</div>
<div>mfcr2_category=national_subscriber</div>
<div>mfcr2_mfback_timeout=-1</div>
<div>mfcr2_metering_pulse_timeout=-1</div>
<div><span style="font-size:10pt">mfcr2_logdir=log</span></div>
<div>mfcr2_logging=all</div>
<div><br>
</div>
<div>context=from-pstn</div>
<div><span style="font-size:10pt">switchtype=euroisdn</span></div>
<div>group=0</div>
<div>faxdetect=incoming</div>
<div>signalling=mfcr2</div>
<div>channel => 1-15,17-31</div>
<div><br>
</div>
<div>;Sangoma A102 port 2 [slot:10 bus:1 span:2]
<wanpipe2></div>
<div>switchtype=euroisdn</div>
<div>context=from-pbx</div>
<div>group=1</div>
<div>faxdetect=incoming</div>
<div>signalling=mfcr2</div>
<div>mfcr2_variant=co</div>
<div>mfcr2_max_ani=10</div>
<div>mfcr2_max_dnis=7</div>
<div>mfcr2_category=national_subscriber</div>
<div>mfcr2_mfback_timeout=-1</div>
<div>mfcr2_metering_pulse_timeout=-1</div>
<div><span style="font-size:10pt">mfcr2_logdir=log</span></div>
<div>mfcr2_logging=all</div>
<div><span style="font-size:10pt">channel =>
32-46,48-62</span></div>
</div>
<div><br>
</div>
<div><br>
</div>
<div>...............................................................................</div>
<div>system.conf</div>
<div><br>
</div>
<div>
<div>loadzone=us</div>
<div>defaultzone=us</div>
<div><br>
</div>
<div>#Sangoma A102 port 1 [slot:10 bus:1 span:1]
<wanpipe1></div>
<div>span=1,1,0,cas,hdb3</div>
<div>cas=1-15:1101</div>
<div>dchan=16</div>
<div>cas=17-31:1101</div>
<div><br>
</div>
<div>#Sangoma A102 port 2 [slot:10 bus:1 span:2]
<wanpipe2></div>
<div>span=2,0,0,cas,hdb3</div>
<div>cas=32-46:1101</div>
<div>dchan=47</div>
<div>cas=48-62:1101</div>
</div>
<div><br>
</div>
<div><br>
</div>
</div>
<br>
<fieldset class="ecxmimeAttachmentHeader"></fieldset>
<br>
<pre>--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by <a class="ecxmoz-txt-link-freetext" href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --
asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
<a class="ecxmoz-txt-link-freetext" href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a></pre>
<br>
<fieldset class="ecxmimeAttachmentHeader"></fieldset>
<br>
<p class="ecx" align="left">Se certificó que el correo no
contiene virus.<br>
Comprobada por AVG - <a href="http://www.avg.es" target="_blank">www.avg.es</a><br>
Versión: 2012.0.1901 / Base de datos de virus: 2109/4754
- Fecha de la versión: 19/01/2012</p>
</blockquote>
</div>
</div>
</div>
<p class="ecx" align="left">Se certificó
que el correo no contiene virus.<br>
Comprobada por AVG - <a href="http://www.avg.es" target="_blank">www.avg.es</a><br>
Versión: 2012.0.1901 / Base de datos de virus: 2109/4755 - Fecha
de la versión: 20/01/2012</p>
</blockquote></div></div></div> </div></body>
</html>