Hello,<div><br></div><div>One of my customers is experiencing something really weird: at bootup, random channels from his E1 appears with a RxC CAS of "BLOCK". If I restart wanrouter, then the channels randomly switch but we never get the 30 channels as IDLE at the same time.</div>
<div><br></div><div>System was working fine, then they reported some noise was getting into the lines. Now the E1 won't even take calls. I've posted a pastebin of what the dahdi_tool looks like after restarting wanrouter several times (each time channels get random block/idle status). The url is <a href="http://pastebin.com/xGB3XCTE">http://pastebin.com/xGB3XCTE</a></div>
<div><br></div><div>The specs of what I'm using:</div><div><br></div><div>Asterisk 1.4.36</div><div>Dahdi 2.4.0</div><div>Wanpipe 3.5.8</div><div>Sangoma AFT-A101c : SLOT=0 : BUS=48 : IRQ=177 : CPU=A : PORT=PRI : V=25</div>
<div>E1 is from Axtel</div><div><br></div><div>Ballum has been changed to dismiss the chance of that being the problem. Dahdi_tool reports no alarms and when trying to dial out, a timeout occur (I can see the mfcr2 debug in the console and I get no ring on the destination phone).</div>
<div><br></div><div>As a side note: the E1 gets conencted into an standard PBX and works fine: no noise nor anything bad happens. As soon as I get it into Asterisk, weird things start to happen.</div><div><br></div><div>
Could the card have gone bad? Let me know what can I do to debug as for obvious reasons the E1 stays connected into the Alcatel during all work hours.</div>
<div><br></div><div>Regards,</div><div><br></div><div> Christian Cabrera<br>
</div>