Hola buenas me atrevo a mandarte un mail y contarte nuestras desgracias llevamos ya poco mas de un me con tratar de levantar un par de R2 uno que sera conectado a un avaya y otro directo a telemex,<br><div class="gmail_quote">
<br>Hemos seguido paso a paso todas los tutos posibles uno por uno, al reves al derecho y nos es posible encontrar una solucion viable para ambos en estos momentos estamos haciendo pruebas con el r2 y el avaya y parece que estamos a punto ya de dar con el clavo pero nos ha esta dando una serie de errores que no sabemos de donde se origina,<br>
<br>Tenemos configurado lo siguiente <br>Elastix 2.0<br>asterisk 1.6.2.6<br>dahdi 2.2.1.1<br>una tarjeta rhino T1E1 (al parecer configurada)<br>cuando revisamos (dahdi_tool) configuracion todo esta OK y revisamos los canales nos da in service dahdi show channels desde la consola, pero si le damos mfcr2 shown channels nos da ilde<br>
<br>nuestra configuracion system.conf<br><br>span=1,1,0,cas,hdb3<br>cas=1-15:1101<br>dchan=16<br>cas=17-31:1101<br><br>loadzone = mx<br>defaultzone = mx<br><br>chan_dahdi.conf<br>[channels]<br>context=from-pstn<br>;signalling=fxs_ks<br>
rxwink=300 ; Atlas seems to use long (250ms) winks<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>cancallforward=yes<br>
callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=no<br>faxdetect=incoming<br>echotraining=800<br>rxgain=0.0<br>txgain=0.0<br>callgroup=1<br>;Uncomment these lines if you have problems with the disconection of your analog lines<br>
;busydetect=yes<br>;busycount=3<br><br>context=from-pstn<br>group=0<br>echocancel=yes<br>signalling=mfcr2<br>mfcr2_variant=mx<br>mfcr2_get_ani_first=no<br>mfcr2_max_ani=4<br>mfcr2_max_dnis=4<br>mfcr2_category=national_priority_subscriber<br>
;mfcr2_category=national_subscriber<br>mfcr2_mfback_timeout=-1<br>mfcr2_metering_pulse_timeout=-1<br>channel =>1-15,17-31<br><br><br>hemos intentado de todo y por eso que es que envio este mail de soporte para ver si pueden ver algo que estemos haciendo mal<br>
esto es lo que nos manda de error<br><br>[Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 8<br>[Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 9<br>[Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 10<br>
[Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 11<br>[Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 12<br>[Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 13<br>
[Jul 12 11:10:52] NOTICE[3497] chan_dahdi.c: Far end unblocked on chan 14<br>[Jul 12 11:10:52] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 7<br>[Jul 12 11:10:52] DEBUG[3550] chan_dahdi.c: bits changed in chan 3<br>
[Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 4<br>[Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 5<br>[Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 6<br>
[Jul 12 11:10:53] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 1<br>[Jul 12 11:10:54] NOTICE[3496] chan_dahdi.c: Far end unblocked on chan 2<br>[Jul 12 11:10:54] DEBUG[3550] chan_dahdi.c: bits changed in chan 3<br>
[Jul 12 11:10:54] ERROR[3550] chan_dahdi.c: Chan 3 - Protocol error. Reason = Invalid CAS, R2 State = Seize ACK Received, MF state = DNIS Digit Transmitted, MF Group = Forward Group I, CAS = 0x08<br>DNIS = 17994, ANI = 7997, MF = 0x20<br>
[Jul 12 11:10:54] ERROR[3550] chan_dahdi.c: MFC/R2 protocol error on chan 3: Invalid CAS<br>[Jul 12 11:10:54] VERBOSE[3550] chan_dahdi.c: -- Hungup 'DAHDI/3-1'<br>[Jul 12 11:10:54] VERBOSE[3550] app_dial.c: == Everyone is busy/congested at this time (1:0/0/1)<br>
[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [s@macro-dialout-trunk:20] NoOp("SIP/7997-00000000", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 111") in new stack<br>
[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [s@macro-dialout-trunk:21] Goto("SIP/7997-00000000", "s-CHANUNAVAIL,1") in new stack<br>[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)<br>
[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] Set("SIP/7997-00000000", "RC=111") in new stack<br>[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:2] Goto("SIP/7997-00000000", "111,1") in new stack<br>
[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Goto (macro-dialout-trunk,111,1)<br>[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [111@macro-dialout-trunk:1] Goto("SIP/7997-00000000", "continue,1") in new stack<br>
[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Goto (macro-dialout-trunk,continue,1)<br>[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [continue@macro-dialout-trunk:1] GotoIf("SIP/7997-00000000", "1?noreport") in new stack<br>
[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Goto (macro-dialout-trunk,continue,3)<br>[Jul 12 11:10:54] VERBOSE[3550] pbx.c: -- Executing [continue@macro-dialout-trunk:3] NoOp("SIP/7997-00000000", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 111 - failing through to other trunks") in new stack<br>
<br><br>Un saludo<br><br>Roberto Juarez<br>Hoteles Sandos <br>Playa del Carmen Q.Roo, Mexico<br>
</div><br>