Hi,<div><br></div><div>I have a r2 channel In Colombia with telefonica Telecom. </div><div><br></div><div>I CAN to receive calls in this moment.....ONLY 1 CALL....When I try to make another call the PSTN say me something that: 'there isn't access to the number in this moment" </div>
<div><br></div><div>In the other way when I call to local numbers (9|XXXXXXX) I don't have problems...but when I call to Cell numbers (9|033XXXXXXXXX) I have this:</div><div><br></div><div><div>MFC/R2 UniCall/1 Far end disconnected (cause = Switching equipment congestion [42]) - state 0x40</div>
<div> -- Channel 0 got hangup</div><div> -- UniCall/1-1 is circuit-busy</div><div>MFC/R2 UniCall/1 Channel gains</div><div>MFC/R2 UniCall/1 Channel switching</div><div>MFC/R2 UniCall/1 Call control(7)</div><div>MFC/R2 UniCall/1 Drop call (cause = Normal Clearing [16])</div>
<div>MFC/R2 UniCall/1 Clearing fwd</div><div>MFC/R2 UniCall/1 1001 -> [2/FAR DISC/Clear fwd B /Idle ]</div><div> -- Hungup 'UniCall/1-1'</div><div> == Everyone is busy/congested at this time (1:0/1/0)</div>
<div><br></div><div><br></div><div>The other problems is when I make 2 outgoing calls :</div><div><br></div><div>the first call (Unicall/2) is answerd but the problem is with a second call (Unicall/3):</div><div><br>
</div><div>MFC/R2 UniCall/2 Call control(6)</div><div>MFC/R2 UniCall/2 Answer call</div><div>MFC/R2 UniCall/2 0101 -> [1/ACCEPTED/Answer /Accepted Paid]</div><div> -- Executing [s@ivr-4:8] Wait("UniCall/2-1", "1") in new stack</div>
<div>MFC/R2 UniCall/2 Channel echo cancel</div><div>MFC/R2 UniCall/1 <- 6 off [2/PROCEED /Group II /Category ]</div><div>MFC/R2 UniCall/3 seize_ack_wait_expired</div><div>MFC/R2 UniCall/3 R2 prot. err. [1/DIALING /Seize /Idle ] cause 32776 - Seize ack timed out</div>
<div>MFC/R2 UniCall/3 1001 -> [1/IDLE /Idle /Idle ]</div><div>MFC/R2 UniCall/3 Channel echo cancel</div><div>MFC/R2 UniCall/3 Channel gains</div><div>MFC/R2 UniCall/3 Channel switching</div><div>
-- Hungup 'UniCall/3-1'</div><div> == Everyone is busy/congested at this time (1:0/0/1)</div><div><br></div><div><br></div><div>Versions:<br>Elastix</div><div><div>asterisk-1.4.21.2 </div><div>chan-unicall-1.4-r01</div>
<div>libsupertone-0.0.2</div><div>zaptel-1.4.11</div><div>libmfcr2-0.0.6</div><div>libunicall-0.0.6 </div><div>spandsp-0.0.5 </div></div><div><br></div><div><br></div><div>My unicall.conf:</div><div><br></div><div><div>
loglevel=255</div><div>protocolclass=mfcr2</div><div>protocolvariant=itu,10,7</div><div>category=NATIONAL_SUBSCRIBER</div><div>protocolend=co</div><div>group=9</div><div>channel => 1-15</div><div>;skip time slot 16</div>
<div>channel => 17-31</div></div><div><br></div><div><br></div><div>My zaptel.conf is:</div><div><br></div><div><div>span=1,1,0,cas,hdb3</div><div>cas=1-15:1101</div><div>dchan=16</div><div>cas=17-31:1101</div></div><div>
<br></div><div><br></div><div>Please help!!!! I have another similar configuration with telefonica Telecom and it's good.</div><div><br></div><div>I don't understand what happend!!</div><div><br></div><div><br></div>
<div><br></div><div><br></div><div><br></div>-- <br>Carem Gyssell Nieto Garcia<br>
</div>