Which card and operating system are you using?<br><br clear="all">Moises Silva<br>Senior Software Engineer<br>Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com">moy@sangoma.com</a><br>
<br><br><div class="gmail_quote">2010/4/12 Juan Manuel Rafael Suárez <span dir="ltr"><<a href="mailto:jrafael@telsyssolution.com">jrafael@telsyssolution.com</a>></span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Here we have some logs...<br>
<br>
<br>
First the sending call asterisk<br>
<br>
[12:06:15:938] [Thread: 84269968] [Chan 1] - Call started at Mon Apr 12<br>
12:06:15 2010 on chan 1 [openr2 version 1.3.0, revision (release)]<br>
[12:06:15:938] [Thread: 84269968] [Chan 1] - Outgoing call proceeding:<br>
ANI=100, DNIS=1, Category=National Subscriber<br>
[12:06:15:938] [Thread: 84269968] [Chan 1] - CAS Tx >> [SEIZE] 0x00<br>
[12:06:15:938] [Thread: 84269968] [Chan 1] - CAS Raw Tx >> 0x01<br>
[12:06:15:938] [Thread: 84269968] [Chan 1] - scheduled timer id 2 (r2_seize)<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - Bits changed from 0x08 to 0x0C<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - CAS Rx << [SEIZE ACK] 0x0C<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - Attempting to cancel timer<br>
timer 2<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - timer id 2 found, cancelling it<br>
now<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - MFC/R2 call acknowledge!<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - Sending DNIS digit 1<br>
[12:06:15:944] [Thread: 84269968] [Chan 1] - MF Tx >> 1 [ON]<br>
[12:06:29:385] [Thread: 84269968] [Chan 1] - Attempting to cancel timer<br>
timer 0<br>
[12:06:29:385] [Thread: 84269968] [Chan 1] - Cannot cancel timer 0<br>
[12:06:29:385] [Thread: 84269968] [Chan 1] - CAS Tx >> [CLEAR FORWARD] 0x08<br>
[12:06:29:385] [Thread: 84269968] [Chan 1] - CAS Raw Tx >> 0x09<br>
[12:06:29:402] [Thread: 3996560] [Chan 1] - Bits changed from 0x0C to 0x08<br>
[12:06:29:402] [Thread: 3996560] [Chan 1] - CAS Rx << [IDLE] 0x08<br>
[12:06:29:402] [Thread: 3996560] [Chan 1] - Call ended<br>
[12:06:29:402] [Thread: 3996560] [Chan 1] - Attempting to cancel timer timer<br>
0<br>
[12:06:29:402] [Thread: 3996560] [Chan 1] - Cannot cancel timer 0<br>
<br>
<br>
<br>
<br>
Then the asterisk that receive the call on mfcR2<br>
<br>
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - Bits changed from 0x08<br>
to 0x00<br>
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Rx << [SEIZE] 0x00<br>
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - Call started at Mon<br>
Apr 12 12:06:15 2010 on chan 1 [openr2 version 1.3.0, revision (release)]<br>
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - Initialized R2 MF<br>
detector<br>
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Tx >> [SEIZE ACK]<br>
0x0C<br>
[Apr 12 12:06:15] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x0D<br>
[Apr 12 12:06:15] NOTICE[14965] chan_dahdi.c: New MFC/R2 call detected on<br>
chan 1.<br>
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - Bits changed from 0x00<br>
to 0x08<br>
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Rx << [CLEAR<br>
FORWARD] 0x08<br>
[Apr 12 12:06:29] NOTICE[14965] chan_dahdi.c: Chan 1 - Far end disconnected.<br>
Reason: Normal Clearing<br>
[Apr 12 12:06:29] NOTICE[14965] chan_dahdi.c: MFC/R2 call disconnected on<br>
chan 1<br>
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - Call ended<br>
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Tx >> [IDLE] 0x08<br>
[Apr 12 12:06:29] DEBUG[14965] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09<br>
[Apr 12 12:06:29] NOTICE[14965] chan_dahdi.c: MFC/R2 call end on chan 1<br>
<br>
<br>
<br>
Here we can see the digit 1 is sent and then it stops, no more anction until<br>
hang up call.<br>
<br>
<br>
<br>
<br>
<br>
Juan Manuel Rafael Suárez – Director Comercial<br>
<a href="http://www.telsyssolution.com" target="_blank">www.telsyssolution.com</a> | <a href="mailto:jrafael@telsyssolution.com">jrafael@telsyssolution.com</a> | t (81) 8881-0101<br>
ext 444| c 044 8110801650<br>
<br>
<br>
<br>
<br>
<br>
Business Continuity with Intelligent communication<br>
<br>
<br>
-----Mensaje original-----<br>
De: <a href="mailto:asterisk-r2-bounces@lists.digium.com">asterisk-r2-bounces@lists.digium.com</a><br>
[mailto:<a href="mailto:asterisk-r2-bounces@lists.digium.com">asterisk-r2-bounces@lists.digium.com</a>] En nombre de<br>
<a href="mailto:jrafael@telsyssolution.com">jrafael@telsyssolution.com</a><br>
Enviado el: Lunes, 12 de Abril de 2010 09:40 a.m.<br>
Para: <a href="mailto:asterisk-r2@lists.digium.com">asterisk-r2@lists.digium.com</a><br>
Asunto: Re: [asterisk-r2] doubt about how to handle calls with openr2<br>
<br>
Hellos thanks for reply, actually it is mexico variant.<br>
<br>
The other side is another trixbox 2.8 with openr2 installed and running.<br>
<br>
When i change sides, i could send call with just one dnig digit.<br>
<br>
But not audio.<br>
<br>
And i saw answer detected before accepted in logs.<br>
<br>
A couple of configuuration changes and i can not complete calls anymore.<br>
<br>
any comments?, thanks for the news contact us is not working i ll check it.<br>
<br>
Jm<br>
Enviado desde mi oficina móvil BlackBerry® de Telcel<br>
<br>
-----Original Message-----<br>
From: Moises Silva <<a href="mailto:moises.silva@gmail.com">moises.silva@gmail.com</a>><br>
Date: Mon, 12 Apr 2010 10:11:38<br>
To: <<a href="mailto:asterisk-r2@lists.digium.com">asterisk-r2@lists.digium.com</a>><br>
Subject: Re: [asterisk-r2] doubt about how to handle calls with openr2<br>
<br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br>
<font color="#888888"><br>
<br>
--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br>
</font></blockquote></div><br>