If you thin you're using the wrong cable ( using cross-over instead of straight RJ45 ) you can just flip the Tx/Rx in the balun coaxial side and see if that helps.<br><br>Also, if that does not help try removing the crc setting from your R2 link.<br>
<br clear="all">Moises Silva<br>Senior Software Engineer<br>Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com">moy@sangoma.com</a><br>
<br><br><div class="gmail_quote">On Wed, Mar 31, 2010 at 10:12 AM, Madini Ladino <span dir="ltr"><<a href="mailto:madinix@gmail.com">madinix@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Thanks for your quick answer! I think the same thing, but E1 link is currently connected to a Nortel and sync without problems. Just when I connect to Asterisk I got blocked state and red alarm. I think there's a cable construction issue? Maybe Nortel works with cross cable and Digium card doesn't?<br>
<br><br>>Date: Tue, 30 Mar 2010 20:27:02 -0600<br>
>From: Juan Carlos Huerta <<a href="mailto:juancarloshuerta@gmail.com" target="_blank">juancarloshuerta@gmail.com</a>><br>
>Subject: Re: [asterisk-r2] MFC R2 Variant Venezuela using openR2<br>
>To: <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>
>Message-ID:<br>
<<a href="mailto:o2q60e5bf4c1003301927w2e60c4bfq6b4d2758be26772c@mail.gmail.com" target="_blank">o2q60e5bf4c1003301927w2e60c4bfq6b4d2758be26772c@mail.gmail.com</a>><br>
>Content-Type: text/plain; charset=ISO-8859-1<br>
<br>
>It seems that the other end (CANTV) has blocked your E1 link, maybe<br>
>you can ask to your carrier to check the link status in their end.<br>
<br>
>Juan Carlos<br>
>~ Lo que no te mata te fortalece ~<br>
<br>
<br>
<br>
On Tue, Mar 30, 2010 at 6:37 PM, Madini Ladino <<a href="mailto:madinix@gmail.com" target="_blank">madinix@gmail.com</a>> wrote:<br>
> I have problems with E1s R2 MFC (CANTV) in Venezuela. Using zttool I got Red<br>
> Alarm.<br>
><br>
> I'm using following versions:<br>
><br>
> Asterisk 1.4.26.1<br>
> *CLI> mfcr2 show version<br>
> OpenR2 version: 1.2.0, revision: (release)<br>
><br>
> My digium card is:<br>
> pci:0000:0b:08.0???? wct4xxp+???? d161:0220 Wildcard TE220 (4th Gen)<br>
><br>
> My? /etc/zaptel.conf? config is:<br>
><br>
> span=1,1,0,ccs,hdb3,crc4<br>
> bchan=1-15<br>
> dchan=16<br>
> bchan=17-31<br>
> loadzone =es<br>
> defaultzone=es<br>
><br>
> span=2,1,0,cas,hdb3,crc4<br>
> cas=32-46:1101<br>
> dchan=47<br>
> cas=48-62:1101<br>
> loadzone =es<br>
> defaultzone=es<br>
><br>
> (span 1: I have a ISDN E1 (currently working), span 2: I have MFC R2? E1<br>
> from CANTV)<br>
><br>
><br>
> My /etc/zapata.conf<br>
><br>
> group=4<br>
> signalling=mfcr2<br>
> mfcr2_variant=ve<br>
> mfcr2_get_ani_first=no<br>
> mfcr2_max_ani=10<br>
> mfcr2_max_dnis=4<br>
> mfcr2_category=national_<div>subscriber<br>
> mfcr2_mfback_timeout=-1<br>
> mfcr2_metering_pulse_timeout=-1<br>
> mfcr2_logdir=log<br>
> mfcr2_logging=all<br>
> channel => 32-46<br>
> channel => 48-62<br>
><br>
><br>
> Actually this R2 E1 is connected to a Nortel and works. When I connect to<br>
> digium card I only got Red alarm.? I'm using a balun to convert to RJ45.<br>
><br>
> When I do zap restart I got:<br>
><br>
> ? == Starting D-Channel on span 1<br>
> ? == Starting R2 context on span 1<br>
> ? == Starting R2 context on span 2<br>
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 32<br>
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 48<br>
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 33<br>
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 49<br>
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 50<br>
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 34<br>
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 51<br>
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 35<br>
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 52<br>
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 36<br>
> [Mar 30 19:49:23] NOTICE[5397]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 53<br>
> [Mar 30 19:49:23] NOTICE[5396]: chan_dahdi.c:1539 dahdi_r2_on_line_blocked:<br>
> Far end blocked on chan 37<br>
><br>
><br>
> When I run mfcr2 show channels I have:<br>
><br>
> *CLI> mfcr2 show channels<br>
> Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS?? Rx CAS<br>
> ? 32 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 33 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 34 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 35 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 36 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 37 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 38 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 39 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 40 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 41 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 42 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 43 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 44 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 45 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 46 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 48 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 49 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 50 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 51 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 52 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 53 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 54 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 55 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 56 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 57 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 58 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 59 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 60 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 61 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
> ? 62 VE????? 10????? 4??????? No??????? No?????????????? IDLE???? BLOCK<br>
><br>
><br>
> This is my zttool for my span 2:<br>
><br>
> ?????????????????? T2XXP (PCI) Card 0 Span 2 ??????????????????<br>
> ?? ?????????????????????????????????????????????????????????????????? ?<br>
> ??????<br>
> ?? ????? ???????????????????????????????????????????????????????????? ?<br>
> ?<br>
> ?? ????? ???? Current Alarms:???? Red Alarm?????????????????????????? ?<br>
> ?<br>
> ?? ????? ???? Sync Source:??????? Internally clocked????????????????? ?? ?<br>
> ?<br>
> ?? ????? ???? IRQ Misses:?????????????? 0???????????????????????????? ?? ??<br>
> ?<br>
> ?? ????? ???? Bipolar Viol:???????????? 0???????????????????????????? ?? ?<br>
> ?<br>
> ?? ????? ???? Tx/Rx Levels:???????? 0/? 0???????????????????????????? ?? ?<br>
> ?<br>
> ?? ????? ???? Total/Conf/Act:????? 31/ 31/ 30???????????????????????? ?? ??<br>
> ?<br>
> ?? ????? ????????????????? 1111111111222222222233???????? ??????????? ?? ?<br>
> ?<br>
> ?? ????? ???????? 1234567890123456789012345678901???????? ? Back ???? ?? ?<br>
> ?<br>
> ?? ????? ???? TxA 111111111111111-111111111111111???????? ??????????? ?? ?<br>
> ?<br>
> ?? ????? ???? TxB 000000000000000-000000000000000???????????????????? ?? ??<br>
> ?<br>
> ?? ????? ???? TxC 000000000000000-000000000000000???????????????????? ?? ?<br>
> ?<br>
> ?? ????? ???? TxD 111111111111111-111111111111111???????????????????? ?<br>
> ?<br>
> ?? ????? ???????????????????????????????????????????????? ??????????? ?<br>
> ?<br>
> ?? ????? ???? RxA 111111111111111-111111111111111???????? ? Loop ???? ?<br>
> ?<br>
> ?? ????? ???? RxB 111111111111111-111111111111111???????? ??????????? ?<br>
> ?<br>
> ?? ????? ???? RxC 000000000000000-000000000000000???????????????????? ?<br>
> ?<br>
> ?? ????? ???? RxD 111111111111111-111111111111111???????????????????? ?<br>
> ?<br>
> ?? ?????????????????????????????????????????????????????????????????? ?<br>
> ?????<br>
> ???????? ??????????????????????????????????????????????????????????????<br>
><br>
><br>
><br>
> Anybody can help me?<br>
><br>
> ????????????????????? Best regards,</div><br><br><br>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br>