El soporte oficial de R2 en Asterisk es OpenR2, por que insistes en usar Unicall?<br><br>-- <br>Moises Silva<br>Senior Software Engineer<br>Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>
t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com">moy@sangoma.com</a><br><br><div class="gmail_quote">On Fri, Mar 5, 2010 at 2:27 PM, omar ivan perez vargas <span dir="ltr"><<a href="mailto:o_i_p_v@hotmail.com">o_i_p_v@hotmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div>
Como estan bueno les cuento que hable con la gente de telecom y me digeron:<br><br>Piloto primario: 5939260<br>Tango MDE: 5939260 - 5939269<br>Digitos q se envian son 7<br><br>Señalizacion: MFC R2<br>CRC: NO<br><br>Se gun esto la variable protocolvariant=co-land,30,7,16<br>
como quedaria????? asi???<br><br>y pues ya me entran llamadas y me salen llamadas pero se me corta en el primer timbre y me sale los siguientes errore por el cli<div><div></div><div class="h5"><br><br>Cuando entra una llamada sale:<br>
<br>
voip*CLI><br>MFC/R2 UniCall/1 <- 0001 [1/IDLE /Idle /Idle ]<br>MFC/R2 UniCall/1 Detected<br>MFC/R2 UniCall/1 Creating a new call with CRN 32770<br>MFC/R2 UniCall/1 1101 -> [2/DETECTED/Seize ack /Seize ack ]<br>
[Mar 5 13:11:26] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Detected<br>MFC/R2 UniCall/1 <- 5 on [2/DETECTED/Seize ack /Seize ack ]<br>MFC/R2 UniCall/1 6 on -> [2/DETECTED/Group A /Category req ]<br>
MFC/R2 UniCall/1 <- 5 off [2/DETECTED/Group A /Category req ]<br>MFC/R2 UniCall/1 Channel flush<br>MFC/R2 UniCall/1 6 off -> [2/DETECTED/Group A /Category req ]<br>MFC/R2 UniCall/1 R2 prot. err. [2/DETECTED/Group A /Category req ] cause 32771 - T3 timed out<br>
MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<br>[Mar 5 13:11:41] NOTICE[5365]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure<br>[Mar 5 13:11:41] ERROR[5365]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32771<br>
MFC/R2 UniCall/1 Channel echo cancel<br>MFC/R2 UniCall/1 <- 1001 [1/IDLE /Idle /Idle ]<br>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<br>voip*CLI><br> <br>
y cuando trato de sacar llamada me sale:<br>
<br>voip*CLI><br> -- Executing [95101652@L-DDN-DDI-CEL:1] Dial("SIP/100-c0001240", "Unicall/g1/5101652") in new stack<br>MFC/R2 UniCall/1 Call control(1)<br>MFC/R2 UniCall/1 Make call<br>MFC/R2 UniCall/1 Creating a new call with CRN 32769<br>
MFC/R2 UniCall/1 0001 -> [1/DIALING /Seize /Idle ]<br> -- Called g1/5101652<br>[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Dialing<br>[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:1914 unicall_exception: Exception on 25, channel 1<br>
MFC/R2 UniCall/1 <- 1101 [1/DIALING /Seize /Idle ]<br>MFC/R2 UniCall/1 5 on -> [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 <- 1 on [2/DIALING /Group I /DNIS ]<br>
MFC/R2 UniCall/1 Channel flush<br>MFC/R2 UniCall/1 5 off -> [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 <- 1 off [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 1 on -> [2/DIALING /Group I /DNIS ]<br>
MFC/R2 UniCall/1 <- 1 on [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 Channel flush<br>MFC/R2 UniCall/1 1 off -> [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 <- 1 off [2/DIALING /Group I /DNIS ]<br>
MFC/R2 UniCall/1 0 on -> [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 <- 5 on [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 Channel flush<br>MFC/R2 UniCall/1 0 off -> [2/DIALING /Group I /DNIS ]<br>
MFC/R2 UniCall/1 <- 5 off [2/DIALING /Group I /DNIS ]<br>MFC/R2 UniCall/1 R2 prot. err. [2/DIALING /Group I /DNIS ] cause 32772 - Unexpected MF6 signal<br>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<br>
[Mar 5 13:10:31] NOTICE[5371]: chan_unicall.c:2518 handle_uc_event: Unicall/1 event Protocol failure<br>[Mar 5 13:10:31] ERROR[5371]: chan_unicall.c:2522 handle_uc_event: Unicall/1 protocol error. Cause 32772<br>MFC/R2 UniCall/1 Channel echo cancel<br>
MFC/R2 UniCall/1 Channel gains<br>MFC/R2 UniCall/1 Channel switching<br> -- Hungup 'UniCall/1-1'<br> == Everyone is busy/congested at this time (1:0/0/1)<br> -- Executing [95101652@L-DDN-DDI-CEL:2] Hangup("SIP/100-c0001240", "") in new stack<br>
== Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c0001240'<br>MFC/R2 UniCall/1 <- 1001 [1/IDLE /Idle /Idle ]<br>MFC/R2 UniCall/1 1001 -> [1/IDLE /Idle /Idle ]<br>
voip*CLI><br> <br>
que sera?<br>
<br>
op<br>
<br>
<hr></div></div><div class="im">
From: <a href="mailto:o_i_p_v@hotmail.com" target="_blank">o_i_p_v@hotmail.com</a><br>To: <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br></div><div class="im">Subject: FW: [asterisk-r2] FW: te122p con E1 telecom conmutado<br>
Date: Fri, 5 Mar 2010 13:08:17 -0500<br><br>
y cuando trato de marcar por el canal me sale:<br> <br>voip*CLI><br> -- Executing [95101652@L-DDN-DDI-CEL:1] Dial("SIP/100-c4003530", "Unicall/g1/5101652") in new stack<br>[Mar 5 13:07:17] WARNING[4661]: app_dial.c:1183 dial_exec_full: Unable to create channel of type 'Unicall' (cause 0 - Unknown)<br>
== Everyone is busy/congested at this time (1:0/0/1)<br> -- Executing [95101652@L-DDN-DDI-CEL:2] Hangup("SIP/100-c4003530", "") in new stack<br> == Spawn extension (L-DDN-DDI-CEL, 95101652, 2) exited non-zero on 'SIP/100-c4003530'<br>
voip*CLI><br><br> <br>Op<br> <br>
<hr></div><div class="im">
From: <a href="mailto:o_i_p_v@hotmail.com" target="_blank">o_i_p_v@hotmail.com</a><br>To: <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br></div><div class="im">Date: Fri, 5 Mar 2010 13:06:11 -0500<br>
</div>Subject: [asterisk-r2] FW: te122p con E1 telecom conmutado<div><div></div><div class="h5"><br><br>
Hola<br> <br>Bueno les cuento que en el balun conecte al contrario el rx y el tx y la tarjeta se coloco en verde...<br> <br>ahora me salen:<br> <br>[Mar 5 13:03:08] ERROR[4529]: chan_unicall.c:2522 handle_uc_event: Unicall/28 protocol error. Cause 32773<br>
MFC/R2 UniCall/29 <- 0100 [1/BLOCKED /Idle /Idle ]<br>MFC/R2 UniCall/29 R2 prot. err. [1/BLOCKED /Idle /Idle ] cause 32773 - Unexpected CAS bit pattern<br>MFC/R2 UniCall/29 1001 -> [1/BLOCKED /Idle /Idle ]<br>
<br> <br>que significa esto???<br> <br>gracias<br> <br>Omar<br> <br>
<hr>
From: <a href="mailto:o_i_p_v@hotmail.com" target="_blank">o_i_p_v@hotmail.com</a><br>To: <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado<br>
Date: Fri, 5 Mar 2010 12:27:06 -0500<br><br>
Mi configuracion<br> <br>
<hr>
From: <a href="mailto:o_i_p_v@hotmail.com" target="_blank">o_i_p_v@hotmail.com</a><br>To: <a href="mailto:asterisk-r2@lists.digium.com" target="_blank">asterisk-r2@lists.digium.com</a><br>Subject: FW: [asterisk-r2] te122p con E1 telecom conmutado<br>
Date: Fri, 5 Mar 2010 11:47:55 -0500<br><br>
Pues le cuento:<br>El canal esta actualmente conectado a una planta Alcatel OmniPCX y esta funcionando<br>el cable UTP sale del balun y entra al puerto de la Alcatel donde dice PBX<br>ese mismo cable es el que uso para conectar a mi tarjeta<br>
Mi configuracion es:<br> <br>zaptel.conf<br> <br># Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)<br>span=1,1,0,cas,hdb3<br># termtype: te<br>cas=1-15:1101<br>#dchan=16<br>cas=17-31:1101<br># Span 2: WCTDM/0 "Wildcard AEX410 Board 1"<br>
fxsks=32<br>fxsks=33<br>fxsks=34<br>fxsks=35<br># Global data<br>loadzone = us<br>defaultzone = us<br><br> <br>unicall.conf<br> <br>[channels]<br>language=es<br>usecallerid=yes<br>hidecallerid=no<br>callwaitingcallerid=yes<br>
threewaycalling=yes<br>transfer=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>echotraining=yes<br>rxgain=0.0<br>txgain=0.0<br>group=1<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br>
musiconhold=default<br>protocolclass=mfcr2<br>; protocolvariant=co-land,30,1,16<br>protocolvariant=co-land,30,7,16<br>protocolend=cpe<br>group = 1<br>loglevel = 255<br>context= from-pstn<br>channel => 1-15<br>channel => 17-31<br>
;skip time slot 16<br><br> <br>extensions.conf<br> <br>[from-pstn]<br>exten=>_.,1,Answer()<br>exten=>_.,n,Goto(ivr,s,1)<br>exten=>_.,n,Hangup<br> <br>exten=>9260,1,Answer()<br>exten=>9260,n,Goto(ivr,s,1)<br>
exten=>9260,n,Hangup<br><br>Tengo entendido q en el zapata.conf no se coloca nada del E1 pero aca les mando:<br> <br>[trunkgroups]<br>[channels]<br>language=es<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>
usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>echocancelwhenbridged=yes<br>relaxdtmf=yes<br>rxgain=0.0<br>
txgain=0.0<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br>faxdetect=incoming<br>busydetect=yes<br>busycount=4<br><br>; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER)<br>;group=1<br>;context=from-pstn<br>;switchtype = euroisdn<br>
;signalling = pri_cpe<br>;channel => 1-31<br>; Span 2: WCTDM/0 "Wildcard AEX410 Board 1"<br>;;; line="32 WCTDM/0/0 RED"<br>signalling=fxs_ks<br>callerid=asreceived<br>group=2<br>context=from-pstn<br>
channel => 32<br>;;; line="33 WCTDM/0/1 RED"<br>signalling=fxs_ks<br>callerid=asreceived<br>group=2<br>context=from-pstn<br>channel => 33<br>;;; line="34 WCTDM/0/2 RED"<br>signalling=fxs_ks<br>callerid=asreceived<br>
group=2<br>context=from-pstn<br>channel => 34<br>;;; line="35 WCTDM/0/3 RED"<br>signalling=fxs_ks<br>callerid=asreceived<br>group=2<br>context=from-pstn<br>channel => 35<br><br>gracias<br><a href="http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE" target="_blank"></a> <br>
</div></div><div class="im"><hr>Connect to the next generation of MSN Messenger <a href="http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline" target="_blank">Get it now! </a></div>
</div>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a href="http://www.api-digital.com" target="_blank">http://www.api-digital.com</a> --<br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br><br>