separate file and then you put them both in <a href="http://pastebin.com">pastebin.com</a><div><br></div><div>The broken MF sequence is pretty bad, it could mean audio garbage on the line, how often do you get it?<br><br><div class="gmail_quote">
On Fri, Oct 30, 2009 at 12:09 PM, Christian Cabrera <span dir="ltr"><<a href="mailto:ccabrera@gmail.com">ccabrera@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
Should I specify the same file as output for both runs, or each one in a separate file?<br><br>Also, I'm noticing the following error:<br><br>[Oct 30 10:04:05] ERROR[31243]: chan_dahdi.c:1600 dahdi_r2_write_log: Chan 65 - Broken MF sequence g<br>
ot 0 but never got tone off for tone 7!<br>[Oct 30 10:04:05] ERROR[31243]: chan_dahdi.c:1600 dahdi_r2_write_log: Chan 65 - Protocol error. Reas<br>on = Broken MF Sequence, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted,<br>
MF Group = Backward Group C, CAS = 0x00<br>DNIS = 0027, ANI = , MF = 0x37<br>[Oct 30 10:04:05] ERROR[31243]: chan_dahdi.c:1372 dahdi_r2_on_protocol_error: MFC/R2 protocol error<br>on chan 65: Broken MF Sequence<br><br>Any ideas about this one?<div class="im">
<br>
<br><br clear="all"> Ing. Christian Cabrera<br><br> Nextel (777) 113 8204 Id 72*15*24335<br>
<br><br></div><div><div></div><div class="h5"><div class="gmail_quote">On Thu, Oct 29, 2009 at 13:51, Moises Silva <span dir="ltr"><<a href="mailto:moises.silva@gmail.com" target="_blank">moises.silva@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left:1px solid rgb(204, 204, 204);margin:0pt 0pt 0pt 0.8ex;padding-left:1ex">
try downloading the svn release-1 in google code, then use the script at debug/asterisk/astdumpr2.sh, execute that script whenever you have stuck channels. The script must be executed 2 times with an interval of 2 seconds between each execution and pastebin the results.<br>
<br><div class="gmail_quote"><div><div></div><div>On Thu, Oct 29, 2009 at 3:36 PM, Christian Cabrera <span dir="ltr"><<a href="mailto:ccabrera@gmail.com" target="_blank">ccabrera@gmail.com</a>></span> wrote:<br>
</div></div><blockquote class="gmail_quote" style="border-left:1px solid rgb(204, 204, 204);margin:0pt 0pt 0pt 0.8ex;padding-left:1ex"><div><div></div><div>
Moy,<br><br>About 2 months ago you helped me out with a problem that made the channels of an E1 get stuck in CLEAR FO mode. Now I'm having a similar problem, but with SEIZE.<br><br>I just did a reinstall of a system using Elastix 1.5.2. I'm using the most up to date version of DAHDI (2.2.0.2) and Asterisk 1.4.26.2 patched with the code provided in your Google's code page. I'm also using Wanpipe 3.5.8.<br>
<br>The problem I'm having is that after the channels change to Tx/Rx Idle/Seize, Asterisk tries to take the channels for an outgoing call, and then it fails, giving out this:<br><br>[Oct 28 16:01:39] ERROR[8446] chan_dahdi.c: Chan 51 - Trying to dial out in a<br>
non-idle channel (cas=0x00)<br>[Oct 28 16:01:39] ERROR[8446] chan_dahdi.c: unable to make new MFC/R2 call!<br><br>Eventually, the channels go back to idle/idle after about 60 to 120 seconds, but due to the volume of calls being processed in this system, this isn't feasible, since too many errors occur (sometimes we get something as low as a 50% success ratio in outgoing calls). Incoming calls do not present this problem at all.<br>
<br>The provisional solution I've created is a PHP script which recurrently sets the channels in idle/seize to block/seize (that way Asterisk wont try to use them and won't give out any errors). After a while, when the channels switch to block/idle, I change them to idle/idle, which allows Asterisk to do the calls.<br>
<br>I'm using a Maxcom E1 in Mexico city.<br><br>Any thoughts on how to solve this?<br><br>Kind regards,<br><br clear="all"> Ing. Christian Cabrera<br><br> Nextel (777) 113 8204 Id 72*15*24335<br>
<br></div></div>_______________________________________________<br>
--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--" target="_blank">http://www.api-digital.com--</a><br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><font color="#888888"><br><br clear="all"><br>-- <br>Moises Silva<br>
Software Developer<br>
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com" target="_blank">moy@sangoma.com</a><br>
</font><br>_______________________________________________<br>
--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--" target="_blank">http://www.api-digital.com--</a><br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br>
</div></div><br>_______________________________________________<br>
--Bandwidth and Colocation Provided by <a href="http://www.api-digital.com--" target="_blank">http://www.api-digital.com--</a><br>
<br>
asterisk-r2 mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
<a href="http://lists.digium.com/mailman/listinfo/asterisk-r2" target="_blank">http://lists.digium.com/mailman/listinfo/asterisk-r2</a><br></blockquote></div><br><br clear="all"><br>-- <br>Moises Silva<br>Software Developer<br>
Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada<br>t. 1 905 474 1990 x 128 | e. <a href="mailto:moy@sangoma.com">moy@sangoma.com</a><br>
</div>