<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
is this you want??<br>
in your extension.conf <br>
<br>
Dial(DAHDI/G1/${EXTEN:1})<br>
<br>
g: select the lowest-numbered non-busy DAHDI channel<br>
(aka. ascending sequential hunt group).<br>
G: select the highest-numbered non-busy DAHDI channel<br>
(aka. descending sequential hunt group).<br>
r: use a round-robin search, starting at the next highest channel than
last<br>
time (aka. ascending rotary hunt group).<br>
R: use a round-robin search, starting at the next lowest channel than
last<br>
time (aka. descending rotary hunt group).<br>
<br>
<br>
El 09/07/09 11:30, Joao Gomes Pereira escribió:
<blockquote cite="mid:4A561B39.3090006@startel.pt" type="cite">
<pre wrap="">I think my problem is the same as your's.
How can i force the calls to go through the upper channels?
Como dividiste para que saque por los canales bajos y NO saque por los
canales altos?
Thanks
Regards
Joao Pereira
Joao Gomes Pereira escreveu:
</pre>
<blockquote type="cite">
<pre wrap="">Hello to all
Im already receiving calls with R2 chan_dahdi, but I cannot place calls.
Here is my config:
chan_dahdi -------------------------------
[channels]
language=en
context=incomingr2
signalling=mfcr2
mfcr2_variant=ar
switchtype=national
mfcr2_get_ani_first=no
mfcr2_max_ani=20
mfcr2_max_dnis=9
mfcr2_category=national_subscriber
group=1
channel =>1-15,17-31
system.conf -------------------------
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
Here is the error:----------------------------------------
-- Executing [912300906@default:1] Dial("SIP/212-087211a8",
"DAHDI/g1/912300906") in new stack
-- Called g1/912300906
WARNING[10474]: chan_dahdi.c:1304 dahdi_r2_write_log: Chan 1 - Seize
Timeout Expired!
ERROR[10474]: chan_dahdi.c:1307 dahdi_r2_write_log: Chan 1 - Protocol
error. Reason = Seize Timeout, R2 State = Seize Transmitted, MF state =
MF Engine Off, MF Group = Forward MF init, CAS = 0x08
DNIS = 912300906, ANI = 212, MF = 0x20
ERROR[10474]: chan_dahdi.c:1058 dahdi_r2_on_protocol_error: MFC/R2
protocol error on chan 1: Seize Timeout
ERROR[10474]: chan_dahdi.c:1307 dahdi_r2_write_log: Chan 1 - Cannot
disconnect call when we dont have a call to disconnect
NOTICE[10474]: chan_dahdi.c:1089 dahdi_r2_disconnect_call: Bad! failed
to disconnect call on channel 1 with reason Normal Clearing, hope for
the best!
-- Hungup 'DAHDI/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel 'SIP/212-087211a8' status is 'CHANUNAVAIL'
What could be the problem?
Thanks
Regards
Joao Pereira
</pre>
</blockquote>
<pre wrap=""><!---->
</pre>
</blockquote>
<br>
</body>
</html>