[asterisk-r2] Multiframe remote alarm - Telecom Argentina E1

[Nicolas Barberis]

And system.conf
loadzone=ar
loadzone=br
loadzone=mx
loadzone=us
defaultzone=ar

#CardId=3&PortNumber=1&ChannelNumber=31
span=1,1,0,cas,hdb3
echocanceller=oslec,1-15:1101
echocanceller=oslec,17-31:1101
cas=1-15:1101
cas=17-31:1101
hardhdlc=16



On Thu, Jun 5, 2014 at 4:48 PM, Nicolas Barberis <nickoarg at gmail.com> wrote:

> chan_dahdi.conf
>
> [trunkgroups]
>
> [channels]
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=no
> txgain=0.0
> rxgain=0.0
> echocancelwhenbridged=no
> busydetect=yes
> busycount=3
> language=es
>
> ;CardId=3&PortNumber=1&ChannelNumber=31
> signalling = mfcr2
> mfcr2_variant = ar
> mfcr2_max_ani = 10
> mfcr2_max_dnis = 4
> mfcr2_category = national_subscriber
> mfcr2_call_files = yes
> mfcr2_mfback_timeout = 5000
> mfcr2_metering_pulse_timeout = 200
> context=default
> group=4
> echocancel=yes
> txgain=0.0
> rxgain=0.0
> channel => 1-15,17-31
>
>
>
> wanpipe:
>
> [devices]
> wanpipe2 = WAN_AFT_TE1, Comment
>
> [interfaces]
> w2g1 = wanpipe2, , TDM_VOICE, Comment
>
> [wanpipe2]
> CARD_TYPE = AFT
> S514CPU = A
> CommPort = PRI
> AUTO_PCISLOT = NO
> PCISLOT = 4
> PCIBUS = 2
> FE_MEDIA = E1
> FE_LCODE = HDB3
> FE_FRAME = NCRC4
> FE_LINE = 2
> TE_CLOCK = NORMAL
> TE_REF_CLOCK = 0
> TE_SIG_MODE = CAS
> TE_HIGHIMPEDANCE = NO
> TE_RX_SLEVEL = 430
> LBO = 120OH
> FE_TXTRISTATE = NO
> MTU = 1500
> UDPPORT = 9000
> TTL = 255
> IGNORE_FRONT_END = NO
> TDMV_SPAN = 2
> TDMV_DCHAN = 0
> TDMV_HW_DTMF = YES
>
> [w2g1]
> ACTIVE_CH = ALL
> TDMV_HWEC = YES
> MTU = 8
>
>
> On Thu, Jun 5, 2014 at 4:41 PM, Moises Silva <moises.silva at gmail.com>
> wrote:
>
>> On Thu, Jun 5, 2014 at 3:37 PM, Nicolas Barberis <nickoarg at gmail.com>
>> wrote:
>>
>>> I was experiencing problems trying to setup the E1 with the Sangoma B601
>>> and I've saw that in the past someone had the same problem that was fixed
>>> with a Sangoma A101, so I got one but the problem still persists.
>>>
>>> The Telecom technical person reports that either the board or the pbx is
>>> not in PCM30 norm in reference of the multiframe bits corresponding to time
>>> slot 16.
>>>
>>
>> What are your versions of Wanpipe and DAHDI?
>>
>> Paste your Wanpipe and DAHDI configuration.
>>
>>
>> *Moises Silva **Manager, Software Engineering*
>>
>> msilva at sangoma.com
>>
>> Sangoma Technologies
>>
>> 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada
>>
>>
>> t.   +1 800 388 2475 (N. America)
>>
>> t.   +1 905 474 1990 x128
>>
>> f.   +1 905 474 9223
>>
>>
>>
>>
>> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>
>>
>> Products
>> <http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>  | Solutions
>> <http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>  | Events
>> <http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>  | Contact
>> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>  | Wiki
>> <http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>  | Facebook
>> <http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>  | Twitter
>> <http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`|
>> | YouTube
>> <http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20140605/19602fff/attachment.html>