[asterisk-r2] Fwd: Problema con Astribank y E1 R2

Fri Jul 25 08:34:34 CDT 2014

Buenos días Moises, 
Tuve el mismo inconveniente con el Astribank de Xorcom, estaba tratando de configurarlo en un Asterisk 1.8, cuando enviaba la llamada por el Astribank solamente me tomaba el primer canal, y la llamada se escuchaba de manera correcta pero por los otros canales no funcionaba, me comunique con la operadora telefónica y me indicaron que no veían que tomara el canal, realice la misma prueba pero conectando el E1 a la tarjeta Digium que tengo en el Asterisk y funciono perfecto, tomaba todos los canales sin inconveniente. 
La solución fue instalar Elastix versión 2.4.0 (Estable), es el que esta certificado para trabajar con con el Astribank de Xorcom, actualmente lo  tengo configurado de esa forma y funciona perfecto. 
Que distribución de Asterisk estas utilizando?
Cualquier duda te puedo ayudar a configurar el Elastix con el Astribank.
Saludos,
Beatriz Belmar 

> From: asterisk-r2-request at lists.digium.com
> Subject: asterisk-r2 Digest, Vol 71, Issue 2
> To: asterisk-r2 at lists.digium.com
> Date: Thu, 24 Jul 2014 12:43:41 -0500
> 
> Send asterisk-r2 mailing list submissions to
> 	asterisk-r2 at lists.digium.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.digium.com/mailman/listinfo/asterisk-r2
> or, via email, send a message with subject or body 'help' to
> 	asterisk-r2-request at lists.digium.com
> 
> You can reach the person managing the list at
> 	asterisk-r2-owner at lists.digium.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of asterisk-r2 digest..."
> 
> 
> Today's Topics:
> 
>    1. Re: Fwd: Problema con Astribank y E1 R2 (Oscar Rocha)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 24 Jul 2014 12:43:54 -0500
> From: Oscar Rocha <orochamty at hotmail.com>
> To: "asterisk-r2 at lists.digium.com" <asterisk-r2 at lists.digium.com>
> Subject: Re: [asterisk-r2] Fwd: Problema con Astribank y E1 R2
> Message-ID: <BLU180-W3567DB40EC725C7436A888B7FF0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Es debido a un problema con el m?dulo DAHDI de Asterisk, a partir de la versi?n 2.7 tiene problemas con se?alizaci?n R2. Lo que debes hacer es bajar de versi?n el DAHDI a la 2.6.
> 
> Date: Thu, 24 Jul 2014 11:01:55 -0500
> From: wrioram at gmail.com
> To: asterisk-r2 at lists.digium.com
> Subject: [asterisk-r2] Fwd: Problema con Astribank y E1 R2
> 
> Tengo problemas para conectarme a la central Ericsson del
> proveedor de servicios usando un Astribank de XORCOM con dos E1 R2 configurados
> con todos los canales bidireccionales.
> 
> 
> La PBX y la central p?blica se conectan y las llamadas entran
> y salen pero solo por el canal uno de cada uno de los E1. Si la comunicaci?n en
> cualquier direcci?n se intenta por otro canal que no sea los mencionados la
> central y la PBX intercambian se?alizaci?n pero antes de intercambiar del n?mero
> marcado la central publica corta la comunicaci?n.
> 
> 
> A continuaci?n los logs de una llamada fallida por el canal 3 de un flujo. Incluyo tambi?n algunos ficheros de
> configuraci?n.
> 
> --- Log de llamada fallida de salida de la PBX:
> 
> [10:02:04:529]
> [Thread: 3055549328] [Chan 3] - Call started at Tue Jul 15 10:02:04 2014 on
> chan 3 [openr2 version 1.3.3, revision (release)]
> 
> [10:02:04:529] [Thread: 3055549328] [Chan 3] - Outgoing call proceeding:
> ANI=2637120, DNIS=052867339, Category=National Subscriber
> 
> [10:02:04:529] [Thread: 3055549328] [Chan 3] - CAS Tx >> [SEIZE]
> 0x00
> 
> [10:02:04:529] [Thread: 3055549328] [Chan 3] - CAS Raw Tx >> 0x01
> 
> [10:02:04:529] [Thread: 3055549328] [Chan 3] - scheduled timer id 2
> (r2_seize)
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - Bits changed from 0x08 to
> 0x0C
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - CAS Rx << [SEIZE ACK]
> 0x0C
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - Attempting to cancel timer timer
> 2
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - timer id 2 found, cancelling it
> now
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - MFC/R2 call acknowledge!
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - Sending DNIS digit 0
> 
> [10:02:04:601] [Thread: 3055549328] [Chan 3] - MF Tx >> 0 [ON]
> 
> [10:02:46:468] [Thread: 3055549328] [Chan 3] - Bits changed from 0x0C to
> 0x00
> 
> [10:02:46:468] [Thread: 3055549328] [Chan 3] - CAS Rx << [FORCED RELEASE]
> 0x00
> 
> [10:02:46:468] [Thread: 3055549328] [Chan 3] - Disconnection before accept
> detected!
> 
> [10:02:46:468] [Thread: 3055549328] [Chan 3] - Far end disconnected. Reason:
> Forced Release
> 
> [10:02:46:469] [Thread: 3055549328] [Chan 3] - Attempting to cancel timer timer
> 0
> 
> [10:02:46:469] [Thread: 3055549328] [Chan 3] - Cannot cancel timer 0
> 
> [10:02:46:469] [Thread: 3055549328] [Chan 3] - CAS Tx >> [CLEAR FORWARD]
> 0x08
> 
> [10:02:46:469] [Thread: 3055549328] [Chan 3] - CAS Raw Tx >> 0x09
> 
> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Bits changed from 0x00 to
> 0x08
> 
> [10:02:46:500] [Thread: 3067456400] [Chan 3] - CAS Rx << [IDLE]
> 0x08
> 
> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Call ended
> 
> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Attempting to cancel timer timer
> 0
> 
> [10:02:46:500] [Thread: 3067456400] [Chan 3] - Cannot cancel timer 0
> 
>  
> 
> 
> -----Archivos de Configuraci?n.--------
> 
> 
> 
> -----system.conf
> 
> 
> 
> 
> # This file is parsed by the Dahdi
> Configurator, dahdi_cfg
> 
> #
> 
> # Span 1: XBUS-00/XPD-00 "Xorcom XPD
> [usb:X1061826].1: E1" (MASTER) HDB3 ClockSource 
> 
> span=1,0,0,cas,hdb3
> 
> cas=1-15:1101
> 
> cas=17-31:1101
> 
> echocanceller=oslec,1-31
> 
>  
> 
> # Span 2: XBUS-00/XPD-01 "Xorcom XPD
> [usb:X1061826].2: E1" HDB3 
> 
> span=2,0,0,cas,hdb3
> 
> cas=32-46:1101
> 
> cas=48-62:1101
> 
> echocanceller=oslec,32-62
> 
>  
> 
> # Span 3: XBUS-01/XPD-00 "Xorcom XPD
> [usb:X1061392].1: FXS" 
> 
> fxoks=63
> 
> echocanceller=oslec,63
> 
> fxoks=64
> 
> echocanceller=oslec,64
> 
> fxoks=65
> 
> echocanceller=oslec,65
> 
> fxoks=66
> 
> echocanceller=oslec,66
> 
> fxoks=67
> 
> echocanceller=oslec,67
> 
> fxoks=68
> 
> echocanceller=oslec,68
> 
> fxoks=69
> 
> echocanceller=oslec,69
> 
> fxoks=70
> 
> echocanceller=oslec,70
> 
> # astbanktype: output
> 
> fxoks=71
> 
> echocanceller=oslec,71
> 
> # astbanktype: output
> 
> fxoks=72
> 
> echocanceller=oslec,72
> 
> # astbanktype: input
> 
> fxoks=73
> 
> echocanceller=oslec,73
> 
> # astbanktype: input
> 
> fxoks=74
> 
> echocanceller=oslec,74
> 
> # astbanktype: input
> 
> fxoks=75
> 
> echocanceller=oslec,75
> 
> # astbanktype: input
> 
> fxoks=76
> 
> echocanceller=oslec,76
> 
>  
> 
> # Span 4: XBUS-01/XPD-10 "Xorcom XPD
> [usb:X1061392].2: FXO" 
> 
> fxsks=77
> 
> echocanceller=oslec,77
> 
> fxsks=78
> 
> echocanceller=oslec,78
> 
> fxsks=79
> 
> echocanceller=oslec,79
> 
> fxsks=80
> 
> echocanceller=oslec,80
> 
> fxsks=81
> 
> echocanceller=oslec,81
> 
> fxsks=82
> 
> echocanceller=oslec,82
> 
> fxsks=83
> 
> echocanceller=oslec,83
> 
> fxsks=84
> 
> echocanceller=oslec,84
> 
>  
> 
> # Global data
> 
>  
> 
> loadzone           =
> us
> 
> defaultzone      =
> us
> 
>  
> 
> --------------
> 
> ---------chan_dahdi.conf
> 
> [trunkgroups]
> 
>  
> 
> [channels]
> 
> context=from-pstn
> 
> language=es
> 
> usecallerid=yes
> 
> usecallingores=yes
> 
> callwaiting=yes
> 
> callwaitingcallerid=yes
> 
> threewaycalling=yes
> 
> transfer=yes
> 
> canpark=yes
> 
> cancallforward=yes
> 
> callreturn=yes
> 
> echocancelwhenbridged=yes
> 
> echotraining=800
> 
> relaxdtmf=yes
> 
> busydetect=yes
> 
> busycount=3
> 
> rxgain=0.0
> 
> txgain=0.0
> 
> inmediate=no
> 
>  
> 
> ;Group for Span1 channels
> 
> group=1
> 
> context=from-pstn
> 
> signalling=mfcr2
> 
> mfcr2_variant=itu
> 
> mfcr2_get_ani_first=yes
> 
> mfcr2_max_ani=10
> 
> mfcr2_max_dnis=10
> 
> mfcr2_category=national_subscriber
> 
> mfcr2_logdir=span1
> 
> mfcr2_loggin=all
> 
> mfcr2_max_call_files=yes
> 
> mfcr2_mfback_timeout=-1
> 
> mfcr2_metering_pulse_timeout=-1
> 
> echocancel=yes
> 
> channel => 1-15,17-31,32-46,48-62
> 
>  
> 
> #include dahdi-channels.conf
> 
> #include chan_dahdi_additional.conf
> 
> 
> 
> -- 
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2 		 	   		  
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20140724/11a453b9/attachment.html>
> 
> ------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
> 
> End of asterisk-r2 Digest, Vol 71, Issue 2
> ******************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20140725/a2cb0377/attachment.html>