[asterisk-r2] problemas con R2 con central NEC

Tue Sep 3 17:21:57 CDT 2013

Lo hice tal cual y no modifica el funcionamiento.Con treshold de 90, 120 o 40 me falla 3 o 4 veces de 30 indistintamente.Adjunto el log de un fallo.Gracias!

[16:08:54:266] [Thread: 142183312] [Chan 60] - Call started at Tue Sep  3 16:08:54 2013 on chan 60 [openr2 version 1.3.1, revision exported][16:08:54:266] [Thread: 142183312] [Chan 60] - Initialized R2 MF detector[16:08:54:266] [Thread: 142183312] [Chan 60] - CAS Tx >> [SEIZE ACK] 0x0C[16:08:54:266] [Thread: 142183312] [Chan 60] - CAS Raw Tx >> 0x0D[16:08:54:794] [Thread: 142183312] [Chan 60] - MF Rx << 5 [ON][16:08:54:794] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 0[16:08:54:794] [Thread: 142183312] [Chan 60] - Cannot cancel timer 0[16:08:54:794] [Thread: 142183312] [Chan 60] - Getting DNIS digit 5[16:08:54:794] [Thread: 142183312] [Chan 60] - DNIS so far: 5, expected length: 4[16:08:54:794] [Thread: 142183312] [Chan 60] - Requesting next DNIS with signal 0x31.[16:08:54:794] [Thread: 142183312] [Chan 60] - MF Tx >> 1 [ON][16:08:54:794] [Thread: 142183312] [Chan 60] - scheduled timer id 2 (mf_back_cycle)[16:08:54:874] [Thread: 142183312] [Chan 60] - MF Rx << 5 [OFF][16:08:54:874] [Thread: 142183312] [Chan 60] - MF Tx >> 1 [OFF][16:08:54:974] [Thread: 142183312] [Chan 60] - MF Rx << 2 [ON][16:08:54:974] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 2[16:08:54:974] [Thread: 142183312] [Chan 60] - timer id 2 found, cancelling it now[16:08:54:974] [Thread: 142183312] [Chan 60] - Getting DNIS digit 2[16:08:54:974] [Thread: 142183312] [Chan 60] - DNIS so far: 52, expected length: 4[16:08:54:974] [Thread: 142183312] [Chan 60] - Requesting next DNIS with signal 0x31.[16:08:54:974] [Thread: 142183312] [Chan 60] - MF Tx >> 1 [ON][16:08:54:974] [Thread: 142183312] [Chan 60] - scheduled timer id 3 (mf_back_cycle)[16:08:55:014] [Thread: 142183312] [Chan 60] - MF Rx << 2 [OFF][16:08:55:014] [Thread: 142183312] [Chan 60] - MF Tx >> 1 [OFF][16:08:55:034] [Thread: 142183312] [Chan 60] - MF Rx << 2 [ON][16:08:55:034] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 3[16:08:55:034] [Thread: 142183312] [Chan 60] - timer id 3 found, cancelling it now[16:08:55:034] [Thread: 142183312] [Chan 60] - Getting DNIS digit 2[16:08:55:034] [Thread: 142183312] [Chan 60] - DNIS so far: 522, expected length: 4[16:08:55:034] [Thread: 142183312] [Chan 60] - Requesting next DNIS with signal 0x31.[16:08:55:034] [Thread: 142183312] [Chan 60] - MF Tx >> 1 [ON][16:08:55:034] [Thread: 142183312] [Chan 60] - scheduled timer id 4 (mf_back_cycle)[16:08:55:054] [Thread: 142183312] [Chan 60] - MF Rx << 2 [OFF][16:08:55:054] [Thread: 142183312] [Chan 60] - MF Tx >> 1 [OFF][16:08:55:154] [Thread: 142183312] [Chan 60] - MF Rx << 8 [ON][16:08:55:154] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 4[16:08:55:154] [Thread: 142183312] [Chan 60] - timer id 4 found, cancelling it now[16:08:55:154] [Thread: 142183312] [Chan 60] - Getting DNIS digit 8[16:08:55:154] [Thread: 142183312] [Chan 60] - DNIS so far: 5228, expected length: 4[16:08:55:154] [Thread: 142183312] [Chan 60] - Done getting DNIS![16:08:55:154] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [ON][16:08:55:154] [Thread: 142183312] [Chan 60] - scheduled timer id 5 (mf_back_cycle)[16:08:55:253] [Thread: 142183312] [Chan 60] - MF Rx << 8 [OFF][16:08:55:253] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [OFF][16:08:55:353] [Thread: 142183312] [Chan 60] - MF Rx << 1 [ON][16:08:55:353] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 5[16:08:55:354] [Thread: 142183312] [Chan 60] - timer id 5 found, cancelling it now[16:08:55:354] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [ON][16:08:55:354] [Thread: 142183312] [Chan 60] - scheduled timer id 6 (mf_back_cycle)[16:08:55:453] [Thread: 142183312] [Chan 60] - MF Rx << 1 [OFF][16:08:55:453] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [OFF][16:08:55:553] [Thread: 142183312] [Chan 60] - MF Rx << 2 [ON][16:08:55:553] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 6[16:08:55:553] [Thread: 142183312] [Chan 60] - timer id 6 found, cancelling it now[16:08:55:553] [Thread: 142183312] [Chan 60] - Getting ANI digit 2[16:08:55:553] [Thread: 142183312] [Chan 60] - ANI so far: 2, expected length: 10[16:08:55:554] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [ON][16:08:55:554] [Thread: 142183312] [Chan 60] - scheduled timer id 7 (mf_back_cycle)[16:08:55:633] [Thread: 142183312] [Chan 60] - MF Rx << 2 [OFF][16:08:55:633] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [OFF][16:08:55:733] [Thread: 142183312] [Chan 60] - MF Rx << 5 [ON][16:08:55:733] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 7[16:08:55:733] [Thread: 142183312] [Chan 60] - timer id 7 found, cancelling it now[16:08:55:733] [Thread: 142183312] [Chan 60] - Getting ANI digit 5[16:08:55:734] [Thread: 142183312] [Chan 60] - ANI so far: 25, expected length: 10[16:08:55:734] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [ON][16:08:55:734] [Thread: 142183312] [Chan 60] - scheduled timer id 8 (mf_back_cycle)[16:08:55:833] [Thread: 142183312] [Chan 60] - MF Rx << 5 [OFF][16:08:55:833] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [OFF][16:08:55:933] [Thread: 142183312] [Chan 60] - MF Rx << 0 [ON][16:08:55:933] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 8[16:08:55:933] [Thread: 142183312] [Chan 60] - timer id 8 found, cancelling it now[16:08:55:933] [Thread: 142183312] [Chan 60] - Getting ANI digit 0[16:08:55:934] [Thread: 142183312] [Chan 60] - ANI so far: 250, expected length: 10[16:08:55:934] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [ON][16:08:55:934] [Thread: 142183312] [Chan 60] - scheduled timer id 9 (mf_back_cycle)[16:08:56:033] [Thread: 142183312] [Chan 60] - MF Rx << 0 [OFF][16:08:56:033] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [OFF][16:08:56:133] [Thread: 142183312] [Chan 60] - MF Rx << 0 [ON][16:08:56:133] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 9[16:08:56:133] [Thread: 142183312] [Chan 60] - timer id 9 found, cancelling it now[16:08:56:133] [Thread: 142183312] [Chan 60] - Getting ANI digit 0[16:08:56:133] [Thread: 142183312] [Chan 60] - ANI so far: 2500, expected length: 10[16:08:56:133] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [ON][16:08:56:134] [Thread: 142183312] [Chan 60] - scheduled timer id 10 (mf_back_cycle)[16:08:56:213] [Thread: 142183312] [Chan 60] - MF Rx << 0 [OFF][16:08:56:213] [Thread: 142183312] [Chan 60] - MF Tx >> 5 [OFF][16:08:56:333] [Thread: 142183312] [Chan 60] - MF Rx << F [ON][16:08:56:333] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 10[16:08:56:333] [Thread: 142183312] [Chan 60] - timer id 10 found, cancelling it now[16:08:56:333] [Thread: 142183312] [Chan 60] - Got end of ANI[16:08:56:333] [Thread: 142183312] [Chan 60] - ANI is restricted[16:08:56:333] [Thread: 142183312] [Chan 60] - Requesting change to Group II with signal 0x33[16:08:56:333] [Thread: 142183312] [Chan 60] - MF Tx >> 3 [ON][16:08:56:333] [Thread: 142183312] [Chan 60] - scheduled timer id 11 (mf_back_cycle)[16:08:56:433] [Thread: 142183312] [Chan 60] - MF Rx << F [OFF][16:08:56:433] [Thread: 142183312] [Chan 60] - MF Tx >> 3 [OFF][16:08:56:534] [Thread: 142183312] [Chan 60] - MF Rx << 1 [ON][16:08:56:534] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 11[16:08:56:534] [Thread: 142183312] [Chan 60] - timer id 11 found, cancelling it now[16:08:56:534] [Thread: 142183312] [Chan 60] - MF Tx >> 6 [ON][16:08:56:534] [Thread: 142183312] [Chan 60] - scheduled timer id 12 (mf_back_cycle)[16:08:56:633] [Thread: 142183312] [Chan 60] - MF Rx << 1 [OFF][16:08:56:633] [Thread: 142183312] [Chan 60] - MF Tx >> 6 [OFF][16:08:56:633] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 12[16:08:56:633] [Thread: 142183312] [Chan 60] - timer id 12 found, cancelling it now[16:08:56:633] [Thread: 142183312] [Chan 60] - scheduled timer id 13 (r2_answer_delay)[16:08:56:793] [Thread: 142183312] [Chan 60] - Attempting to cancel timer timer 13[16:08:56:793] [Thread: 142183312] [Chan 60] - timer id 13 found, cancelling it now[16:08:56:793] [Thread: 142183312] [Chan 60] - calling timer 13 (r2_answer_delay) callback[16:09:01:385] [Thread: 143707024] [Chan 60] - Bits changed from 0x00 to 0x08[16:09:01:385] [Thread: 143707024] [Chan 60] - CAS Rx << [CLEAR FORWARD] 0x08[16:09:01:385] [Thread: 143707024] [Chan 60] - Far end disconnected. Reason: Normal Clearing[16:09:01:385] [Thread: 143707024] [Chan 60] - Call ended[16:09:01:385] [Thread: 143707024] [Chan 60] - Attempting to cancel timer timer 0[16:09:01:385] [Thread: 143707024] [Chan 60] - Cannot cancel timer 0

> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 2 Sep 2013 12:23:38 -0500
> From: Oscar Rocha <orochamty at hotmail.com>
> Subject: Re: [asterisk-r2] problemas con R2 con central NEC
> To: "asterisk-r2 at lists.digium.com" <asterisk-r2 at lists.digium.com>
> Message-ID: <BLU180-W321DBAC77A34486D2A68AFB7300 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Para el log completo debes tener en la configuraci?n del R2 el par?metro "mfcr2_logging=all" (en /etc/asterisk/dahdi-channels.conf o /etc/asterisk/chan_dahdi.conf), y en el /etc/openr2/r2proto.conf solo pon activado el "mf_threshold=90", los dem?s par?metros b?rralos o com?ntalos, no se requieren. En las pruebas que hice posteriores al cambio ya no hab?a fallas, funcionaban al 100%. Te adjunto la configuraci?n que funcion? en el /etc/asterisk/dahdi-channels.conf :
> 
> language=es
> group=0
> context=from-internal
> signalling=mfcr2
> mfcr2_logdir=span1
> mfcr2_variant=mx
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=20
> mfcr2_category=national_subscriber
> mfcr2_call_files=yes
> mfcr2_logging=all
> mfcr2_mfback_timeout=-1
> mfcr2_advanced_protocol_file=/etc/openr2/r2proto.conf
> channel => 1-15,17-31
> 
> Saludos...
> Oscar Rocha.
> 
> From: marceloeduardo12345678 at hotmail.com
> To: asterisk-r2 at lists.digium.com
> Date: Sun, 1 Sep 2013 12:27:25 +0000
> Subject: Re: [asterisk-r2] problemas con R2 con central NEC
> 
> 
> 
> 
> 
> 
> Es lo que estuve haciendo pero en los logs (los archivos.call) que genera el debug no veo en ningun lado los milisegundos. Como hiciste para obtenerlos?Por lo que veo de tu explicacion lo que yo pretend?a (hacer que falle 100% de las veces) no seria posible dado que todo depende de un comportamiento irregular de la NEC.Para lo cual me parece que deberia continuar las pruebas como al final estaba intentando, por ejemplo probar 30 llamadas (usando redial para no alterar el resultado con el marcado manual) y ver cuantas fallan de 30.Cuando lo corregiste te funcionaron el 100%  o algunas pocas aveces te fallaban tambien?Porque con algunos cambios del treshold pasaban de fallarme 15 o 18de 30 a fallar 3 o 4 de 30
> saludos y gracias
> 
> 
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2 		 	   		   		 	   		  
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20130902/3740f4ce/attachment.html>
> 
> ------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
> 
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-r2
> 
> End of asterisk-r2 Digest, Vol 61, Issue 2
> ******************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20130903/8c96ac36/attachment.htm>