[asterisk-r2] asterisk-r2 Digest, Vol 62, Issue 3

[Latre]

Well....its works now.

I change a parameter:  mfcr2_skip_category=yes

My configuration complete is:

signalling=mfcr2
mfcr2_variant=mx
mfcr2_get_ani_frist=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
; ####  Se cambio a yes y funciona con TELUM MEXICO
mfcr2_skip_category=yes
;mfcr2_category=national_priority_subscriber
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
; this is for debugging purposes
;mfcr2_logdir=log
;mfcr2_logging=all
; end debugging configuration
context=from-pstn
group=2
restrictcid=yes
hidecallerid=yes
channel => 32-46
channel => 48-62


thank you.



2013/11/4 Latre <latrew at gmail.com>

> Still not working.....
>
> [2013-11-04 03:20:34] WARNING[10395]: chan_dahdi.c:4109
> dahdi_r2_write_log: Chan 32 - MF back cycle timed out!
> [2013-11-04 03:20:34] ERROR[10395]: chan_dahdi.c:4112 dahdi_r2_write_log:
> Chan 32 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State
> = Seize ACK Transmitted, MF state = Change To Group II Request Transmitted,
> MF Group = Backward Group B, CAS = 0x00
> DNIS = 4000, ANI = 818125XXXX, MF = 0x30
> [2013-11-04 03:20:34] DEBUG[10395]: chan_dahdi.c:4119 dahdi_r2_write_log:
> Chan 32 - CAS Tx >> [IDLE] 0x08
> [2013-11-04 03:20:34] DEBUG[10395]: chan_dahdi.c:4119 dahdi_r2_write_log:
> Chan 32 - CAS Raw Tx >> 0x09
> [2013-11-04 03:20:34] ERROR[10395]: chan_dahdi.c:3897
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 32: Multi
> Frequency Cycle Timeout
> [2013-11-04 03:20:34] DEBUG[10395]: chan_dahdi.c:4119 dahdi_r2_write_log:
> Chan 32 - Bits changed from 0x00 to 0x08
> [2013-11-04 03:20:34] DEBUG[10395]: chan_dahdi.c:4119 dahdi_r2_write_log:
> Chan 32 - CAS Rx << [IDLE] 0x08
> [2013-11-04 03:20:34] NOTICE[10395]: chan_dahdi.c:4143
> dahdi_r2_on_line_idle: Far end unblocked on chan 32
>
> I try with dahdi:   dahdi-linux-complete-2.6.1+2.6.1]
>
> But still the same....
>
> The conexion is R2 of Mexico carrier Telum.
>
> My outgoing calls its ok.....but no inbound.
>
> I have 2 servers asterisk with the same problem......diferent dahdi,
> diferent asterisk version...., diferent hardware, only the same is that
> both have a redfone.
>
>
>
>
> On Thu, Oct 31, 2013 at 8:52 AM, Moises Silva <moises.silva at gmail.com>wrote:
>
>> On Thu, Oct 31, 2013 at 12:08 AM, bipin singh <bipinraghuvanshi at gmail.com
>> > wrote:
>>
>>> Hi,
>>>
>>> mfcr2_get_any_first to "yes" and set the proper protocol variant ,  check it.
>>>
>>> Just to be clear, the parameter is "mfcr2_get_ani_first", note "ani" as
>> in "Automatic Number Identification" not "any".
>>
>> Moy
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20131105/68cbfb4f/attachment.html>