[asterisk-r2] error al cargar modulo de dahdi

[Yuliesky Bello]

Buenas

Cunado intento cargar el modulo de dahdi desde el CLI de asterisk me
arroja el siguiente error

[2012-05-24 20:05:12] WARNING[4165]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 1 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.

Version de asterisk 10.0.4
version de dahdi 2.6.1

El proveedor de servicios me entrega un E1 fraccionado 1-15 entrantes
y 17-31 saliente

MFCR2 entrante
DTMF/R2 saliente



Los ficheros configurados son:

CHAN DAHDI

[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of
your analog lines
;busydetect=yes
;busycount=3


immediate=yes

#include dahdi-channels.conf
#include chan_dahdi_additional.conf


DAH I CHANEL:

; Autogenerated by /usr/sbin/dahdi_genconf on Thu May 24 18:10:46 2012
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
;

; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/ RED
group=1

context=from-pstn
signalling=mfcr2
mfcr2_variant=ve
mfcr2_get_ani_first=yes
mfcr2_immediate_accept=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=cantv
mfcr2_logging=all
channel => 1-15

group=2
context=from-pstn
signalling=mfcr2
mfcr2_variant=ve
mfcr2_dtmf_detection=1
mfcr2_dtmf_dialing=1
mfcr2_logdir=cantv
mfcr2_logging=all
channel => 17-31

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) B8ZS/ESF RED
group=0,12
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 32-54
context = default
group = 63

SYSTEM.CONF.:

# Autogenerated by /usr/sbin/dahdi_genconf on Thu May 24 18:10:46 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/ RED
span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
echocanceller=mg2,1-15,17-31

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) B8ZS/ESF RED
span=2,2,0,esf,b8zs
# termtype: te
bchan=32-54
dchan=55
echocanceller=mg2,32-54

# Global data

loadzone    = ve
defaultzone    = ve

-- 
Saludos.

Ing. Yuliesky Bello Chávez.