[asterisk-r2] error al cargar modulo dahdi

Wed May 23 04:55:35 CDT 2012

Hola, hicistes la correccion en el system.conf que te menciona Moy? La linea del cancelador de eco tiene un numero demas.

Tambien he observado que la sintaxis de este archivo dependiendo de la version del asterisk es mas estricta una que otra.

Por ejemplo, podrias colocar para 1.4 
cas=1-15,17-13:1101
dchan=16 # da error a partir de 1.6 aunque eso esta bien porque el estandar cas ya define la señalizacion sobre el circuito 16.

La sintaxis del dahdi-channel para E1 fraccionados tambien es algo de probar. Por no dejar, configura todos los circuitos en un solo grupo

Si actualizastes el kernel, chequea que el paquete kernel-dahdi-modules este instalado con la misma version.

Saludos

Atentamente,
Ing. Ettore Eliseo Pelliccioni Monrroy 

Tlf.:+58.212.7626555
Móvil:+58.414.1111330
Skype:ettore.pelliccioni
eMail/msn: ettore.pelliccioni at techniclite.com
Web site: www.techniclite.com

This message may contain confidential information or privileged material, and is intended only for the individual(s) named. If you are not in the named address you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.
E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.  

-----Original Message-----
From: Yuliesky Bello <yulitico at gmail.com>
Sender: asterisk-r2-bounces at lists.digium.com
Date: Tue, 22 May 2012 15:08:18 
To: <asterisk-r2 at lists.digium.com>
Reply-To: asterisk-r2 at lists.digium.com
Subject: [asterisk-r2] error al cargar modulo dahdi

Buenas este es otro error que me arroja a la hora de ejecutar

 module load chan_dahdi.so

ASTERISK*CLI> module load chan_dahdi.so
Unable to load module chan_dahdi.so
Command 'module load chan_dahdi.so' failed.
  == Parsing '/etc/asterisk/chan_dahdi.conf':   == Found
  == Parsing '/etc/asterisk/dahdi-channels.conf':   == Found
  == Parsing '/etc/asterisk/chan_dahdi_additional.conf':   == Found
  == Parsing '/etc/asterisk/users.conf':   == Found
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 1 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 1, MFC/R2 signalling
2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf: Attempt
to configure channel 2 with signaling MFC/R2 ignored because it is
already configured to be MFC/R2.
    -- Registered channel 2, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 3 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 3, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 4 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 4, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 5 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 5, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 6 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 6, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 7 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 7, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 8 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 8, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 9 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 9, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 10 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 10, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 11 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 11, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 12 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 12, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 13 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 13, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 14 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 14, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 15 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 15, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 17 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 17, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 18 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 18, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 19 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 19, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 20 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 20, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 21 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 21, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 22 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 22, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 23 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 23, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 24 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 24, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 25 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 25, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 26 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 26, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 27 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 27, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 28 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 28, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 29 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 29, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 30 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 30, MFC/R2 signalling
[2012-05-22 22:22:32] WARNING[5002]: chan_dahdi.c:12732 mkintf:
Attempt to configure channel 31 with signaling MFC/R2 ignored because
it is already configured to be MFC/R2.
    -- Registered channel 31, MFC/R2 signalling
[2012-05-22 22:22:32] ERROR[5002]: chan_dahdi.c:17589 process_dahdi:
Unknown signalling method 'pri_cpe' at line 44.
[2012-05-22 22:22:32] ERROR[5002]: chan_dahdi.c:12401 mkintf:
Signalling requested on channel 32 is MFC/R2 but line is in ISDN PRI
signalling
[2012-05-22 22:22:32] ERROR[5002]: chan_dahdi.c:16959 build_channels:
Unable to register channel '32-54'

-- 
Saludos.

Ing. Yuliesky Bello Chávez.

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-r2 mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-r2