[asterisk-r2] Elastix cutting call after 4 digits

[Patrick Mugabeni]

Mcgrath,

 

Before I send the log file, see the CLI output once I call 245121

 

MFC/R2 call offered on chan 1. ANI = , DNIS = 2451, Category = National
Subscriber

MFC/R2 call has been accepted on backward channel 1

    -- Executing [2451 at from-pstn:1] Set("DAHDI/1-1", "__FROM_DID=2451") in
new stack

    -- Executing [2451 at from-pstn:2] NoOp("DAHDI/1-1", "Received an unknown
call with DID set to 2451") in new stack

    -- Executing [2451 at from-pstn:3] Goto("DAHDI/1-1", "s,a2") in new stack

    -- Goto (from-pstn,s,2)

    -- Executing [s at from-pstn:2] Answer("DAHDI/1-1", "") in new stack

    -- Executing [s at from-pstn:3] Wait("DAHDI/1-1", "2") in new stack

    -- Executing [s at from-pstn:4] Playback("DAHDI/1-1", "ss-noservice") in
new stack

    -- <DAHDI/1-1> Playing 'ss-noservice.gsm' (language 'en')

 

From: asterisk-r2-bounces at lists.digium.com
[mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of Mc GRATH Ricardo
Sent: 27 February 2012 15:34
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Elastix cutting call after 4 digits

 

Hi Patricia

 

log is written according to mfcr2_logdir= defalut is span1 and files with
trace dump should be at  /var/log/asterisk/mfxr2/span1

BR

 

Mc GRATH Ricardo

E-Mail mcgrathr at mail2web.com

 

  _____  

From: asterisk-r2-bounces at lists.digium.com
[asterisk-r2-bounces at lists.digium.com] On Behalf Of Patrick Mugabeni
[mugabenp at coppernet.zm]
Sent: 27 February 2012 10:25
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Elastix cutting call after 4 digits

Mc GRATH,

 

Where is the log written?  I can send it immediately. 

 

Regards

 

PKM

 

From: asterisk-r2-bounces at lists.digium.com
[mailto:asterisk-r2-bounces at lists.digium.com] On Behalf Of Mc GRATH Ricardo
Sent: 27 February 2012 14:52
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Elastix cutting call after 4 digits

 

Patricia

 

It will help you if you can provide more details as E1 trace log
information, just needed to enable:

For your references for capture information you have to set onto
chan_dahdi.conf (mfcr2_logdir= , mfcr2_call_files= ,mfcr2_logging=all).

If you check log file recorder on mfcr2_logdir you will see if system is
processing dnis 6 or 4 digits.

Best regards

Mc GRATH Ricardo

E-Mail mcgrathr at mail2web.com

 

  _____  

From: asterisk-r2-bounces at lists.digium.com
[asterisk-r2-bounces at lists.digium.com] On Behalf Of Patrick Mugabeni
[mugabenp at coppernet.zm]
Sent: 27 February 2012 09:15
To: asterisk-r2 at lists.digium.com
Subject: [asterisk-r2] Elastix cutting call after 4 digits

Hello,

[Patrick Mugabeni] 

Could someone help. I have the chan_dahdi.conf setup with the following, but
incoming call from E1 only has four digits even after changing
mfcr2_max_dnis=6 from 4

[root at coppercom ~]# cat /etc/asterisk/chan_dahdi.conf

;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit

;autogenrated on 2012-02-23

;Dahdi Channels Configurations

;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

 

[trunkgroups]

 

[channels]

context=default

usecallerid=yes

hidecallerid=no

callwaiting=yes

usecallingpres=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

canpark=yes

cancallforward=yes

callreturn=yes

echocancel=yes

echocancelwhenbridged=yes

relaxdtmf=yes

rxgain=0.0

txgain=0.0

group=1

callgroup=1

pickupgroup=1

immediate=no

 

 

;Sangoma A101 port 1 [slot:4 bus:5 span:1] <wanpipe1>

context=from-pstn

group=0

echocancel=yes

faxdetect=incoming

channel => 1-15

channel => 17-31

signalling=mfcr2

mfcr2_variant=br

mfcr2_get_ani_first=no

mfcr2_max_ani=20

mfcr2_max_dnis=6

mfcr2_category=national_subscriber

mfcr2_logdir=span1

mfcr2_logging=all

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120228/a026d28b/attachment-0001.htm>