[asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

[Mc GRATH Ricardo]

Carlos

Thanks, I still investigated for some solution, I don't give up, just to said to don't loose time and generate more confusion.
Best  regards


Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>

________________________________
From: asterisk-r2-bounces at lists.digium.com [asterisk-r2-bounces at lists.digium.com] On Behalf Of Carlos Rodriguez Alcala [carlos.rav at gmail.com]
Sent: 27 February 2012 00:01
To: asterisk-r2 at lists.digium.com
Subject: Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Ricardo,

You help me alot!!! I tested all suggestion!!!
I wrotte to Moy (Moises Silva) and he found the solutions of "send the digits that the users dial no matters if the reach  mfcr2_max_dnis=7  .

on
/etc/openr2/r2proto.conf

mf_g1_tones.no_more_dnis_available=X

#####
and include on

dahdi-channels.conf

the line
mfcr2_advanced_protocol_file=/etc/openr2/r2proto.conf


I´ll put the complete configurations tomorrow morning!!!

Thanks one more time!!!

2012/2/26 Mc GRATH Ricardo <mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>>
Carlos

At first I have to said sorry, I found on Asterisk as i mentioned if duplicated context (copy and paste) it will assume the first one, I just mean can't duplicate MFCR2 and set different value, it will take valid the first one, second no meaning.
Again very sorry my apologize, I can suggested to used PRI mode you can send one or more digit, or other add another E1 card.
Sorry for confuse.
Best regards

Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>

________________________________
From: asterisk-r2-bounces at lists.digium.com<mailto:asterisk-r2-bounces at lists.digium.com> [asterisk-r2-bounces at lists.digium.com<mailto:asterisk-r2-bounces at lists.digium.com>] On Behalf Of Mc GRATH Ricardo [mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>]
Sent: 25 February 2012 20:27

To: asterisk-r2 at lists.digium.com<mailto:asterisk-r2 at lists.digium.com>
Subject: Re: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Carlos

problem in E1 MFCR2 mode as it a compeller you must send digit mfcr2 max digit, after complete MFCR2 signal  process (B6 or whatever) system will exchange speech, all these according to  MFCR2 DNIS.
So the only way, is to partitioned channel according to 3, 6, 7 digits, but you should test beforehand, it need to work together with Nortel PBX, could let me know Nortel Model to try look information?
Best regards


Mc GRATH Ricardo
E-Mail mcgrathr at mail2web.com<mailto:mcgrathr at mail2web.com>

________________________________



--
Atentamente,

Carlos Rodríguez Alcalá Villagra

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120227/dfdf7016/attachment.htm>