[asterisk-r2] Problem Sending call PBX(nortel) --- asterisk -- TELCO

Wed Feb 22 07:52:01 CST 2012

Puedo  TELCO a un softphone( solo para pruebas lo hice a modo de separar el
problema en dos E1), de la PBX a un sofphone no, ahí esta mi problema. Yo
quiero poder llamar a numeros con 6 o 7 digitos, por eso coloco
mfcr2_max_dnis=7 , pero creo que espera 7 digitos sino da error.

Con la configuracion que coloco a continuacion pude sacar llamadas de la
PBX a TELCO pero de 4 digitos, pero en cuanto cambiaba a mfcr2_max_dnis=7
o mfcr2_max_dnis=6 dejaba de reliazar las llamadas :(

mfcr2_max_ani=10

mfcr2_max_dnis=4

context=entrada

group=1

channel => 1-15,17-31

group=2

#context=salida

channel => 32-46,48-62

2012/2/22 omar ivan perez vargas <o_i_p_v at hotmail.com>

>  Q mas...
> y puedes llamar de la PBX a un softphone?
> y puedes llamar de la TELCO a un softphone?
> Si es asi me imagino q dentro del asterisk para cada uno tienes creado una
> TRONCAL y ademas has de tener para cada uno una ruta de entrada.
> tambien has de tener una ruta de salida a cada uno, evidentemente cada uno
> a de manejar extensiones con numeraciones diferentes...
> Ej
>
> TELCO con numeracion 2XXX
> PBX con numeracion 3XXX
>
> en la ruta de salida le dices q las marcaciones a:
> TELCO las permita solo a 2XXX
> PBX las permita solo a 3XXX
>
> Hasta aca los softphone pueden llamar
>
> Ahora dentro del elastix tienes q crear en la opion
> Misc Destination
>
> Description:
>
> 2XXX
>
> Dial:
>
> 2XXX
> despues le das sumit
>
> lo mismo para la TELCO
> Misc Destination
>
> Description:
>
> 3XXX
>
> Dial:
>
> 3XXX
> despues le das sumit
>
> Esa seria la forma grafica, porq tambien lo puedes hacer por comandos en
> el archivo extension_custom
> colocando algo como:
>
>
> exten=>_2XXX,1,Dial(TRONCAL-TELCO/${EXTEN})
>
> exten=>_2XXX,N,Hangup
>
> exten=>_3XXX,1,Dial(TRONCAL-PBX/${EXTEN})
>
> exten=>_3XXX,N,Hangup
>
> OP
>
> ------------------------------
> Date: Wed, 22 Feb 2012 09:16:49 -0300
> From: carlos.rav at gmail.com
> To: asterisk-r2 at lists.digium.com
> Subject: [asterisk-r2] Problem Sending call PBX(nortel) --- asterisk --
> TELCO
>
>
> Hola/Hi all,
>
> I´m tryng to configure this : TELCO(named COPACO from
> Paraguay)---asterisk(elastix)--- PBX(Nortel)
>
> I can make calls:
>  - from TELCO to PBX
>  - from a sipphone to TELCO (through E1)
>  - from a sipphone to PBX (through de second E1)
>
>
> My problem:
>
> - I can´t make call from PBX to TELCO  :(
>
> Can someone help me?
>
> Thanks in advance
> (I really look at google or the before writte here!!!)
>
>
> mis config files son:
> #####################
> chan_dahdi.conf
> ; Auto-generated by /usr/sbin/hardware_detector
> [trunkgroups]
> [channels]
> language=es
> context=entrada
> signalling=fxs_ks
> rxwink=300              ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callerid=asreceived
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
>  cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> faxdetect=incoming
> echotraining=800
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
>
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
> #################
> dahdi-channels.conf
> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
> group=1
> context=entrada
> ;switchtype = euroisdn
> signalling =mfcr2
> mfcr2_variant=itu
> mfcr2_get_ani_first=no
> mfcr2_max_ani=10
> mfcr2_max_dnis=4
> mfcr2_category=national_subscriber
> mfcr2_logdir=span1
> mfcr2_call_files=yes
> mfcr2_logging=all
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> mfcr2_allow_collect_calls=yes
> mfcr2_double_answer=no
> mfcr2_forced_release=no
> mfcr2_charge_calls=yes
> channel => 1-15,17-31
> context = default
>
> ; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
> mfcr2_skip_category=yes
> group=2
> ;switchtype = euroisdn
> signalling =mfcr2
> mfcr2_variant=itu
> mfcr2_get_ani_first=no
> mfcr2_max_ani=4
> mfcr2_max_dnis=7
> callerid=asreceived
> mfcr2_category=national_priority_subscribe
> mfcr2_logdir=span1
> mfcr2_call_files=yes
> mfcr2_logging=all
> mfcr2_mfback_timeout=-1
> mfcr2_metering_pulse_timeout=-1
> mfcr2_allow_collect_calls=no
> mfcr2_double_answer=no
> mfcr2_forced_release=no
> mfcr2_charge_calls=yes
> mfcr2_skip_category=no
> callerid=asreceived
> context=salida
> channel => 32-46,48-62
>
>
> extensions.conf
>  [salida]
> exten => .,1,Answer
> exten => .,2,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
> exten =>
> .,3,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
> exten => .,n,Dial(DAHDI/g1/${EXTEN})
> exten => h,1,Hangup
>
> [entrada]
> exten =>  _XXX,1,Answer
> exten =>
>  _XXX,n,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
> exten =>
>  _XXX,n,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
> exten =>  _XXX,n,Dial(DAHDI/g2/${EXTEN})
> ;para sipphone
> exten => _9.,1,Answer
> exten => _9.,2,set(calltime=${STRFTIME(${EPOCH},,%C%y-%m-%d--%H\:%M\:%S)})
> exten
> =>_9.,3,MixMonitor(E_${calltime}_from_${CALLERID(num)}to__${EXTEN}.wav)
> exten => _9.,n,Dial(DAHDI/g1/${EXTEN:1})
>
>
> Tambien adjunto un log de una llamada al numero de seis digitos 390109
> cat chan-33-backward-0-20120221222123.call
> [22:21:23:536] [Thread: 3073817488] [Chan 33] - Call started at Tue Feb 21
> 22:21:23 2012 on chan 33 [openr2 version 1.3.1, revision exported]
> [22:21:23:536] [Thread: 3073817488] [Chan 33] - Initialized R2 MF detector
> [22:21:23:536] [Thread: 3073817488] [Chan 33] - CAS Tx >> [SEIZE ACK] 0x0C
> [22:21:23:536] [Thread: 3073817488] [Chan 33] - CAS Raw Tx >> 0x0D
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - MF Rx << 3 [ON]
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 0
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - Cannot cancel timer 0
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 3
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - DNIS so far: 3, expected
> length: 7
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with
> signal 0x31.
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
> [22:21:23:779] [Thread: 3073817488] [Chan 33] - scheduled timer id 2
> (mf_back_cycle)
> [22:21:23:839] [Thread: 3073817488] [Chan 33] - MF Rx << 3 [OFF]
> [22:21:23:839] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [ON]
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 2
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - timer id 2 found,
> cancelling it now
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 9
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - DNIS so far: 39, expected
> length: 7
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with
> signal 0x31.
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
> [22:21:23:919] [Thread: 3073817488] [Chan 33] - scheduled timer id 3
> (mf_back_cycle)
> [22:21:23:999] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [OFF]
> [22:21:23:999] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [ON]
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 3
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - timer id 3 found,
> cancelling it now
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 0
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - DNIS so far: 390, expected
> length: 7
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with
> signal 0x31.
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
> [22:21:24:079] [Thread: 3073817488] [Chan 33] - scheduled timer id 4
> (mf_back_cycle)
> [22:21:24:159] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [OFF]
> [22:21:24:159] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - MF Rx << 1 [ON]
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 4
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - timer id 4 found,
> cancelling it now
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 1
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - DNIS so far: 3901,
> expected length: 7
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with
> signal 0x31.
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
> [22:21:24:239] [Thread: 3073817488] [Chan 33] - scheduled timer id 5
> (mf_back_cycle)
> [22:21:24:319] [Thread: 3073817488] [Chan 33] - MF Rx << 1 [OFF]
> [22:21:24:319] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [ON]
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 5
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - timer id 5 found,
> cancelling it now
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 0
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - DNIS so far: 39010,
> expected length: 7
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with
> signal 0x31.
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
> [22:21:24:399] [Thread: 3073817488] [Chan 33] - scheduled timer id 6
> (mf_back_cycle)
> [22:21:24:479] [Thread: 3073817488] [Chan 33] - MF Rx << 0 [OFF]
> [22:21:24:479] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [ON]
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 6
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - timer id 6 found,
> cancelling it now
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - Getting DNIS digit 9
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - DNIS so far: 390109,
> expected length: 7
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - Requesting next DNIS with
> signal 0x31.
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [ON]
> [22:21:24:559] [Thread: 3073817488] [Chan 33] - scheduled timer id 7
> (mf_back_cycle)
> [22:21:24:639] [Thread: 3073817488] [Chan 33] - MF Rx << 9 [OFF]
> [22:21:24:639] [Thread: 3073817488] [Chan 33] - MF Tx >> 1 [OFF]
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 7
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - timer id 7 found,
> cancelling it now
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - calling timer 7
> (mf_back_cycle) callback
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - MF back cycle timed out!
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - Protocol error. Reason =
> Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state =
> DNIS Request Transmitted, MF Group = Backward Group A, CAS = 0x00
> DNIS = 390109, ANI = , MF = 0x20
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - Attempting to cancel timer
> timer 0
> [22:21:29:559] [Thread: 3073817488] [Chan 33] - Cannot cancel timer 0
>
> --
> Atentamente,
>
> Carlos Rodríguez Alcalá Villagra
>
>
> -- _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> asterisk-r2 mailing list To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-r2
>

-- 
Atentamente,

Carlos Rodríguez Alcalá Villagra
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-r2/attachments/20120222/1347cd06/attachment-0001.htm>