[asterisk-r2] problema con actualizacion a dahdi 2.6 y E1 sin funcionar
r0d0
rodolfo at dic.ohc.cu
Wed Feb 15 14:09:07 CST 2012
no, when i run dahdi_tool it send no alarm but, but dont working
here is more info [1], my system.conf [2] and my chan_dahdi.conf [3]
any help
thanks in advance
[1]
1]
active=yes
alarms=OK
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CAS
[2]
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
#Span1
span=1,0,0,cas,hdb3
cas=1-15,17-31:1101
echocanceller=mg2,1-15,17-31
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
#span=2,2,0,ccs,hdb3,crc4
# termtype: te
#bchan=32-46,48-62
#dchan=47
# Global data
loadzone = us
defaultzone = us
[3]
; Auto-generated by /usr/sbin/hardware_detector
[trunkgroups]
[channels]
context=from-pstn
signalling=fks_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
group=0
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;*******************
signalling=mfcr2
mfcr2_variant=itu
mfcr2_get_ani_first=no
mfcr2_max_ani=15
mfcr2_max_dnis=10
mfcr2_category=national_subscriber
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
mfcr2_logdir=log
mfcr2_logging=all
channel=>1-15,17-31
;Uncomment these lines if you have problems with the disconection of
your analog lines
;busydetect=yes
;busycount=3
immediate=no
On 02/15/2012 03:02 PM, Ing. León Ramos wrote:
> Do you have any other error reported? like alarms or something?
>
> 2012/2/15 r0d0<rodolfo at dic.ohc.cu>:
>> i had upgraded my distro form elastix 2.0.0 to elastix 2.2.0, after that i
>> recompiled libpri and dahdi because the new elastix 2.2.0 do not recongnized
>> my PSTN card (digium TE210P), after that everything ok but my E1 isn't
>> working, any change on this version of dahdi and openr2??
>>
>> thank for everything
>>
>>
>>
>>
>> On 02/15/2012 02:43 PM, Gerardo Barajas wrote:
>>>
>>> Please Post in English.
>>>
>>> Saludos/Regards
>>> --
>>> Ing. Gerardo Barajas Puente
>>>
>>> Ingeniería | www.neocenter.com
>>> T:+52 (55) 8590-9000 x 7003
>>>
>>>
>>>
>>> 2012/2/15 r0d0<rodolfo at dic.ohc.cu>:
>>>>
>>>>
>>>>
>>>> si descargue de digium y actualize pero, despues de actualizar la distro
>>>> a
>>>> elastix 2.2.0. todo esta intanto pero tuve que reinstalar le libpri y el
>>>> dahdi para que reconociera la tarjeta( Digium TE210P ), despues de esto
>>>> la
>>>> reconocio pero no logro echar a andar el enlace con la PSTN, con la
>>>> opcion
>>>> de de seatear mg2 ya no dio mas errores, aparente mente el enlace E1 dice
>>>> ok
>>>> pero no se comunica. alguna idea de que prueba hacer para ver en que
>>>> estado
>>>> esta??
>>>>
>>>>
>>>> On 02/15/2012 01:52 PM, Jose Flores Galicia wrote:
>>>>>
>>>>>
>>>>> Hola r0d0.
>>>>> El error está frente a ti, tu versión de DAHDI nueva (me supongo la
>>>>> descargaste de digium y compilaste) no incluye el modulo de cancelador
>>>>> OSLEC, sin embargo en tu configuración lo quieres usar.
>>>>>
>>>>> 2 Soluciones.
>>>>>
>>>>> - Recompilas DAHDI con el cancelador OSLEC. Aqui hay una muy buena liga
>>>>> de información: http://www.rowetel.com/blog/?page_id=454
>>>>> - Cambias la configuración por un cancelador que si tengas incluido,
>>>>> como mg2.
>>>>>
>>>>> Saludos
>>>>>
>>>>> José Flores Galicia
>>>>> SerITel
>>>>>
>>>>>
>>>>> 2012/2/15 Ing. León Ramos<leon.ramos at nucleum.com.mx
>>>>> <mailto:leon.ramos at nucleum.com.mx>>
>>>>>
>>>>>
>>>>> Hola!
>>>>>
>>>>> Has probado haciendo rollback de la versión?
>>>>>
>>>>> 2012/2/15 r0d0<rodolfo at dic.ohc.cu<mailto:rodolfo at dic.ohc.cu>>:
>>>>>
>>>>> > buenos dias a todos tuve un problema [3] despues de actualizar a
>>>>> la version
>>>>> > current de dahdi, he probado algunas posibles configuraciones
>>>>> encontradas
>>>>> > gogleando pero sigue sinfuncionar, alguna idea de cual es la
>>>>> config
>>>>> > correcta?? la configuracion anterior era [4] y trabajaba
>>>>> perfectamente.
>>>>> >
>>>>> > gracias de antemano
>>>>> >
>>>>> > [1]
>>>>> > # Autogenerated by /usr/sbin/dahdi_genconf on Wed Feb 15 12:00:18
>>>>> 2012
>>>>> > # If you edit this file and execute /usr/sbin/dahdi_genconf
>>>>> again,
>>>>> > # your manual changes will be LOST.
>>>>> > # Dahdi Configuration File
>>>>> > #
>>>>> > # This file is parsed by the Dahdi Configurator, dahdi_cfg
>>>>> > #
>>>>> > # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>>>>> > span=1,0,0,cas,hdb3
>>>>> > cas=1-15,17-31:1101
>>>>> > #dchan=16
>>>>> > echocanceller=oslec,1-15,17-31
>>>>> >
>>>>> >
>>>>> >
>>>>> > # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>>>>> > #span=2,2,0,ccs,hdb3,crc4
>>>>> > # termtype: te
>>>>> > #bchan=32-46,48-62
>>>>> > #dchan=47
>>>>> >
>>>>> > # Global data
>>>>> >
>>>>> > loadzone = us
>>>>> > defaultzone = us
>>>>> >
>>>>> > [2]
>>>>> > service dahdi restart
>>>>> > Unloading DAHDI hardware modules: ERROR: Module wct4xxp is in use
>>>>> > ERROR: Module dahdi is in use by wct4xxp
>>>>> > error
>>>>> > Loading DAHDI hardware modules:
>>>>> > wct4xxp: [ OK
>>>>> ]
>>>>> >
>>>>> > Running dahdi_cfg: DAHDI_ATTACH_ECHOCAN failed on channel 1:
>>>>> Invalid
>>>>> > argument (22)
>>>>> >
>>>>> [FAILED]
>>>>> > [3]
>>>>> > dahdi_cfg -vvv
>>>>> > DAHDI Tools Version - 2.6.0
>>>>> >
>>>>> > DAHDI Version: 2.6.0
>>>>> > Echo Canceller(s): HWEC
>>>>> > Configuration
>>>>> > ======================
>>>>> >
>>>>> > SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>>>>> >
>>>>> > Channel map:
>>>>> >
>>>>> > Channel 01: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 01)
>>>>> > Channel 02: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 02)
>>>>> > Channel 03: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 03)
>>>>> > Channel 04: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 04)
>>>>> > Channel 05: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 05)
>>>>> > Channel 06: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 06)
>>>>> > Channel 07: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 07)
>>>>> > Channel 08: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 08)
>>>>> > Channel 09: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 09)
>>>>> > Channel 10: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 10)
>>>>> > Channel 11: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 11)
>>>>> > Channel 12: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 12)
>>>>> > Channel 13: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 13)
>>>>> > Channel 14: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 14)
>>>>> > Channel 15: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 15)
>>>>> > Channel 17: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 17)
>>>>> > Channel 18: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 18)
>>>>> > Channel 19: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 19)
>>>>> > Channel 20: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 20)
>>>>> > Channel 21: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 21)
>>>>> > Channel 22: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 22)
>>>>> > Channel 23: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 23)
>>>>> > Channel 24: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 24)
>>>>> > Channel 25: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 25)
>>>>> > Channel 26: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 26)
>>>>> > Channel 27: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 27)
>>>>> > Channel 28: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 28)
>>>>> > Channel 29: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 29)
>>>>> > Channel 30: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 30)
>>>>> > Channel 31: CAS / User (Default) (Echo Canceler: oslec) (Slaves:
>>>>> 31)
>>>>> >
>>>>> > 30 channels to configure.
>>>>> >
>>>>> > Setting echocan for channel 1 to oslec
>>>>> > DAHDI_ATTACH_ECHOCAN failed on channel 1: Invalid argument (22)
>>>>> > ~
>>>>> > [4]
>>>>> > # Global data
>>>>> > #***********************************
>>>>> > #Span1
>>>>> > span=1,0,0,cas,hdb3
>>>>> > cas=1-15:1101
>>>>> > dchan=16
>>>>> > cas=17-31:1101
>>>>> > echocanceller=oslec,1-15,17-31
>>>>> > --
>>>>> > Talk is cheap, show me the code!!!
>>>>> >
>>>>> >
>>>>> > --
>>>>> >
>>>>> _____________________________________________________________________
>>>>> > -- Bandwidth and Colocation Provided by
>>>>> http://www.api-digital.com
>>>>> --
>>>>> >
>>>>> > asterisk-r2 mailing list
>>>>> > To UNSUBSCRIBE or update options visit:
>>>>> > http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Ing. León Alberto Ramos Mendoza
>>>>> Director General
>>>>> Meganúcleo S.A. de C.V.
>>>>> (55) 36260226 ext 1101
>>>>> leon.ramos at nucleum.com.mx<mailto:leon.ramos at nucleum.com.mx>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> _____________________________________________________________________
>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>>
>>>>> asterisk-r2 mailing list
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Talk is cheap, show me the code!!!
>>>>
>>>>
>>>> --
>>>> _____________________________________________________________________
>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>>
>>>> asterisk-r2 mailing list
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-r2 mailing list
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>>
>>>
>>
>>
>> --
>> Talk is cheap, show me the code!!!
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
--
Talk is cheap, show me the code!!!
More information about the asterisk-r2
mailing list