[asterisk-r2] problema con actualizacion a dahdi 2.6 y E1 sin funcionar
Ing. León Ramos
leon.ramos at nucleum.com.mx
Wed Feb 15 13:46:57 CST 2012
What about disabling echo cancel at all? did you tried that?
El día 15 de febrero de 2012 13:35, r0d0 <rodolfo at dic.ohc.cu> escribió:
>
>
> si descargue de digium y actualize pero, despues de actualizar la distro a
> elastix 2.2.0. todo esta intanto pero tuve que reinstalar le libpri y el
> dahdi para que reconociera la tarjeta( Digium TE210P ), despues de esto la
> reconocio pero no logro echar a andar el enlace con la PSTN, con la opcion
> de de seatear mg2 ya no dio mas errores, aparente mente el enlace E1 dice ok
> pero no se comunica. alguna idea de que prueba hacer para ver en que estado
> esta??
>
>
> On 02/15/2012 01:52 PM, Jose Flores Galicia wrote:
>>
>> Hola r0d0.
>> El error está frente a ti, tu versión de DAHDI nueva (me supongo la
>> descargaste de digium y compilaste) no incluye el modulo de cancelador
>> OSLEC, sin embargo en tu configuración lo quieres usar.
>>
>> 2 Soluciones.
>>
>> - Recompilas DAHDI con el cancelador OSLEC. Aqui hay una muy buena liga
>> de información: http://www.rowetel.com/blog/?page_id=454
>> - Cambias la configuración por un cancelador que si tengas incluido,
>> como mg2.
>>
>> Saludos
>>
>> José Flores Galicia
>> SerITel
>>
>>
>> 2012/2/15 Ing. León Ramos <leon.ramos at nucleum.com.mx
>> <mailto:leon.ramos at nucleum.com.mx>>
>>
>>
>> Hola!
>>
>> Has probado haciendo rollback de la versión?
>>
>> 2012/2/15 r0d0 <rodolfo at dic.ohc.cu <mailto:rodolfo at dic.ohc.cu>>:
>>
>> > buenos dias a todos tuve un problema [3] despues de actualizar a
>> la version
>> > current de dahdi, he probado algunas posibles configuraciones
>> encontradas
>> > gogleando pero sigue sinfuncionar, alguna idea de cual es la config
>> > correcta?? la configuracion anterior era [4] y trabajaba
>> perfectamente.
>> >
>> > gracias de antemano
>> >
>> > [1]
>> > # Autogenerated by /usr/sbin/dahdi_genconf on Wed Feb 15 12:00:18
>> 2012
>> > # If you edit this file and execute /usr/sbin/dahdi_genconf again,
>> > # your manual changes will be LOST.
>> > # Dahdi Configuration File
>> > #
>> > # This file is parsed by the Dahdi Configurator, dahdi_cfg
>> > #
>> > # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
>> > span=1,0,0,cas,hdb3
>> > cas=1-15,17-31:1101
>> > #dchan=16
>> > echocanceller=oslec,1-15,17-31
>> >
>> >
>> >
>> > # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
>> > #span=2,2,0,ccs,hdb3,crc4
>> > # termtype: te
>> > #bchan=32-46,48-62
>> > #dchan=47
>> >
>> > # Global data
>> >
>> > loadzone = us
>> > defaultzone = us
>> >
>> > [2]
>> > service dahdi restart
>> > Unloading DAHDI hardware modules: ERROR: Module wct4xxp is in use
>> > ERROR: Module dahdi is in use by wct4xxp
>> > error
>> > Loading DAHDI hardware modules:
>> > wct4xxp: [ OK ]
>> >
>> > Running dahdi_cfg: DAHDI_ATTACH_ECHOCAN failed on channel 1:
>> Invalid
>> > argument (22)
>> > [FAILED]
>> > [3]
>> > dahdi_cfg -vvv
>> > DAHDI Tools Version - 2.6.0
>> >
>> > DAHDI Version: 2.6.0
>> > Echo Canceller(s): HWEC
>> > Configuration
>> > ======================
>> >
>> > SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
>> >
>> > Channel map:
>> >
>> > Channel 01: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 01)
>> > Channel 02: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 02)
>> > Channel 03: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 03)
>> > Channel 04: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 04)
>> > Channel 05: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 05)
>> > Channel 06: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 06)
>> > Channel 07: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 07)
>> > Channel 08: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 08)
>> > Channel 09: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 09)
>> > Channel 10: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 10)
>> > Channel 11: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 11)
>> > Channel 12: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 12)
>> > Channel 13: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 13)
>> > Channel 14: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 14)
>> > Channel 15: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 15)
>> > Channel 17: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 17)
>> > Channel 18: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 18)
>> > Channel 19: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 19)
>> > Channel 20: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 20)
>> > Channel 21: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 21)
>> > Channel 22: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 22)
>> > Channel 23: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 23)
>> > Channel 24: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 24)
>> > Channel 25: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 25)
>> > Channel 26: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 26)
>> > Channel 27: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 27)
>> > Channel 28: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 28)
>> > Channel 29: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 29)
>> > Channel 30: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 30)
>> > Channel 31: CAS / User (Default) (Echo Canceler: oslec) (Slaves: 31)
>> >
>> > 30 channels to configure.
>> >
>> > Setting echocan for channel 1 to oslec
>> > DAHDI_ATTACH_ECHOCAN failed on channel 1: Invalid argument (22)
>> > ~
>> > [4]
>> > # Global data
>> > #***********************************
>> > #Span1
>> > span=1,0,0,cas,hdb3
>> > cas=1-15:1101
>> > dchan=16
>> > cas=17-31:1101
>> > echocanceller=oslec,1-15,17-31
>> > --
>> > Talk is cheap, show me the code!!!
>> >
>> >
>> > --
>> >
>> _____________________________________________________________________
>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com
>> --
>> >
>> > asterisk-r2 mailing list
>> > To UNSUBSCRIBE or update options visit:
>> > http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>> --
>> Ing. León Alberto Ramos Mendoza
>> Director General
>> Meganúcleo S.A. de C.V.
>> (55) 36260226 ext 1101
>> leon.ramos at nucleum.com.mx <mailto:leon.ramos at nucleum.com.mx>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>>
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-r2 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-r2
>
>
>
> --
> Talk is cheap, show me the code!!!
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-r2 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-r2
--
Ing. León Alberto Ramos Mendoza
Director General
Meganúcleo S.A. de C.V.
(55) 36260226 ext 1101
leon.ramos at nucleum.com.mx
More information about the asterisk-r2
mailing list